See what our Experts say about this Yakima Roof Rack

• Can Thule Hullavator Install on Yakima Crossbars
  The Thule Hullavator Pro # TH898 can fit round bars by grabbing around the crossbar and can fit aero shaped bars if the bars have a channel on top of them. Which the Yakima aero shaped bars don't have top channels so to go the Yakima route will require round bars which includes the part numbers # Y00408, # Y53TR, # Y03536, and # Y00241 and you'd be set.
  view full answer...
• Recommended Yakima Roof Rack Upgrade for Subaru Factory Roof Rack
  The factory roof rack on the 2016 Subaru Outback Wagon has minimal options to fit the factory roof rack which is different than the factory side rails or flush mounted rails. You can use the Landing Pad 15 for Yakima Control Towers - Qty 4 # Y00241 which will allow you to simply remove your factory crossbars and mount these pads in their place. Then you can use the SkyLine Towers for Yakima Crossbars # Y53TR and round bar adapter # Y03536 if you want to use round bars like the 48 inch...
  view full answer...
  
• Can I Attach My Yakima OffGrid and High Roller to Rhino-Rack HD Crossbars?
  Since you have Yakima tracks like the # Y01126 installed on your 2014 Ford F-150, a great option is the Rhino-Rack Roof Rack for Thule and Yakima Tracks - 2 Heavy-Duty Crossbars - 65" # Y01-140B-NT. The Rhino-Rack HD crossbars provide you with 220 pounds of maximum weight capacity. There are no other heavy duty crossbar setups that are compatible with the Yakima tracks that have a larger weight capacity (or go over 165 pounds). Even though Yakima cannot confirm for sure, my representative...
  view full answer...
• What is the Best 16 Cubic Foot Or More Cargo Box/Crossbars for My 2018 Nissan Murano SL?
  There are a couple options for a cargo box setup on your 2018 Nissan Murano SL with a bare roof. As far as the box, I recommend the Yakima SkyBox 16 Roof Cargo Box - 16 cu ft # Y95AV or the Yakima SkyBox 21 Rooftop Cargo Box - 21 cu ft # Y07337. The great thing about the SkyBoxes is that they include the SuperLatch system that ensures the lid is latched closed and locked. With this mechanism, the key cannot be removed unless the lid is closed properly. In addition, the SkyBoxes include...
  view full answer...
• What Crossbar System Do You Recommend For a Rooftop Tent on My 2021 Subaru Forester?
  For a crossbar system that will be able to accommodate a roof top tent on your 2021 Subaru Forester, I recommend the following parts: - Yakima JetStream Crossbars - Aluminum - Black - 50" # Y00425 - TimberLine Towers for Yakima Crossbars - Raised, Factory Side Rails # Y33TR - (optional for theft-deterrence) Yakima Same-Key Lock Cores # Y07204 With this Yakima crossbar systems, you will be able to accommodate a rooftop tent up to a maximum static weight capacity of 600 pounds. If the...
  view full answer...
• Parts Needed to Mount Rhino-Rack Pioneer Platform to Truck Topper with Yakima Tracks
  You need a complete roof rack wtih crossbars to mount the Rhino-Rack Pioneer Platform, part # RR42115BF, on your ARE topper. Since you already have Yakima tracks you can use four of the Control Towers, part # Y8890027, with two sets of Landing Pad 1, part # Y00221. Then choose the round crossbars at the proper length: 48 inches # Y00408 58 inches # Y00409 66 inches # Y00410 78 inches # Y00411 86 inches # Y00420
  view full answer...
• Removing Yakima BaseLine Roof Rack System From 2016 Honda Civic
  While there are not instructions available for removing the Yakima BaseLine Towers Y00146 from your 2016 Honda Civic I would be happy to walk you through the removal process. This will require the tightening tool that was included with your BaseLine Towers, but if you do not have the tool you can use a long 4mm Hex Wrench. First you are going to want to remove the end cap from the tower, if you have the Yakima SKS lock cores # Y07204 you will need to unlock the cores, or if you have...
  view full answer...
  
• Recommended Yakima Roof Rack for 2007 Honda Accord 4 Door
  For your 2007 Honda Accord you would simply select sedan for the 4 door version. The Yakima system for your vehicle will be the Baseline roof rack. The Q-Tower and Q-Clip fit kits were discontinued a few years back. My recommendation for you consists of the following Yakima parts: JetStream Crossbars - Aluminum - Black - 50" Long # Y00425 BaseLine Towers # Y28TR BaseClip Fit Kit (front) # Y06159 BaseClip Fit Kit (rear) # Y06143 I also recommend adding locks # Y07204
  view full answer...
• Recommended Roof Rack for a 2024 Chevy Equinox w/ Factory Raised Side Rails
  Yes, there absolutely is! I have listed the parts below you will need to add a Yakima roof rack, with round bars, to your 2024 Chevy Equinox with factory raised side rails. Not sure what length of round bars you have so I threw in the ones we have for reference. TimberLine Towers for Yakima Crossbars - Raised, Factory Side Rails - Qty 4 item # Y33TR RoundBar SL Adapter for Yakima BaseLine, SkyLine, TimberLine, and RidgeLine Towers - Qty 4 item # Y03536 Yakima RoundBar Crossbars - Steel...
  view full answer...
• Roof Rack and Cargo Box Recommendation for 2017 Honda Accord Sedan
  The Yakima roof rack you referenced part numbers # Y00408, # Y28TR, # Y03536, and # Y06148 is a confirmed fit for your 2017 Honda Accord sedan and would be an excellent option for carrying a roof cargo box. Then for a cargo box the Thule Force part # TH6357B would fit this rack and work great. I attached a review video for this box installed on a similar sized vehicle as your Accord sedan. I really like the Thule roof racks and cargo baskets as they are very well made, easy to use, and...
  view full answer...
• Roof Rack Options that Fit 2012 Chrysler 300
  What install video are you referring to? Or what part number?
  view full answer...
• Economically Priced Roof Rack Recommendation for 2019 Toyota Camry with Naked Roof
  While we do have roof racks that fit your 2019 Toyota Camry with a naked roof the Rola you mentioned is not a fit as it fits Honda Civics. Instead the most economically priced rack we have that does fit your vehicle is the Yakima BaseLine roof rack part numbers # Y00408, # Y28TR, # Y03536, and # Y06192. At this time (June 2019) there aren't any Rola roof racks that fit your vehicle.
  view full answer...
• Does Rola Roof Rack R4000 Fit a 2017 GMC Terrain with Naked Roof
  Rola roof rack R4000 actually mounts to side rails on vehicles so if your 2017 GMC Terrain has a naked roof then it will not work. The most cost effective option for models with a naked roof is from Yakima using the following parts: Crossbars # Y00408 BaseLine Towers # Y28TR RoundBar SL Adapter # Y03536 2 of BaseClip fit kit # Y06146
  view full answer...
• Will the Yakima 1A Raingutter Towers Work with the Kwik-Rail Mounting Brackets # Y08002?
  From the looks of your photo, you have the Side Loader Mounting Brackets for Yakima 1A Raingutter Towers # Y08002. I confirmed with my tech at Yakima that the Yakima 1A Raingutter Towers (QTY 4) # Y00101 fit these Kwik-Rail mounts. For theft-deterrence, I recommend the Yakima Same-Key Lock Cores # Y07204. If you need Yakima RoundBars to go with the towers and the brackets, I recommend one of the following crossbar sets: - Round 48" CrossBars for Yakima Roof Rack System # Y00408 - Round...
  view full answer...
  
• Yakima RoundBar Roof Rack Components Needed For A 2022 Kia Telluride
  Hey John, To mount Yakima RoundBars to your Telluride's flush rails you'll need the following components: SightClip Fit Kit # Y34UR SightLine Towers # Y64AR RoundBar SL Adapter # Y03536 Yakima recommends their 48" RoundBar # Y00408 or 50" aero bar for the 2022 Kia Telluride so you'd have quite a bit of overhang if you go with 58" RoundBars # Y00409. Flush rail towers are typically being screwed into fixed mounting points or clamping down into a slot so they actually are a bit more...
  view full answer...
• Can I Mount the Side Loader Mounting Brackets item # Y08002 on a Vertical Surface?
  Yes, they can Eric. The Side Loader Mounting Brackets item # Y08002 are designed to recreate rain gutters like you see on cargo vans. They do not require a specific angle to be functional. What you will want to look at is where you can mount them, and how far apart you need them to mount various items like bike racks, canoes, kayaks, cargo boxes, baskets or any other accessory. These are sold as a pair. Here are the rest of the parts you'll need to complete the roof rack: 1A Raingutter...
  view full answer...
• Round Bar Roof Rack For a 2024 Toyota 4Runner With Raised Factory Rails
  Andrew, we currently only carry round bar crossbars from Yakima. For your 2024 Toyota 4Runner you will need the Towers # Y33TR , RoundBar Adapters # Y03536 and then to select the length of the crossbars you want from the list below. I do see your 4Runner is 75.8" wide not including the side mirrors. 48" RoundBars # Y00408 58" RoundBars # Y00409 66" RoundBars # Y00410 78" RoundBars # Y00411
  view full answer...
• Correct Mounting Components Needed to Mount Yakima RoundBar on a 2024 Toyota RAV4
  William, if you have the round Yakima Roundbars # Y00408, then you will need the RoundBar SL Adapter for Yakima BaseLine, SkyLine, TimberLine, and RidgeLine Towers # Y03536, the SkyLine Towers for Yakima Crossbars # Y53TR, and the Landing Pad 23 for Yakima SkyLine and Control Towers # Y98FR.
  view full answer...
• Loadstop Compatibility With Yakima CoreBar And Universal Mighty Mounts
  Since the Yakima CoreBar # Y00421 does not have a t-slot to accept the standard load stops like # 753-3761, and due to its shape the LoadStop Brackets for Yakima Round Crossbars # Y05000 won't work either, leaving you with no compatible option. In order to use the load stops # Y05000 with your MightyMounts # Y03590, you'd need a different set of crossbars # Y00408 with the adapter # Y03536. I know it's not ideal, but due to the uniqueness of your crossbars that is your best option.
  view full answer...
• Yakima Roof Rack that Fits Leer Truck Topper Tracks
  We have the Yakima roof rack components needed to install in the tracks on top of your Leer 100XR camper shell. To complete your roof rack setup you will need: quantity 2 of the Landing Pad 1 # Y00221 quantity 4 of the Control Towers # Y8890027 and depending on the length of your cap quantity 2 Crossbars like: 48 inch # Y00408 58 inch # Y00409 66 inch # Y00410 78 inch # Y00411 To lock your roof rack to your tracks, I recommend the set of 4 lock cores with keys # Y07204.
  view full answer...
• What Parts do I Need to Install My Yakima RoundBars on My Truck Topper on My 2021 Toyota Tacoma?
  If you already have Yakima Round Bars like the # Y00408, the parts you need to attach the crossbars to the tracks are 4 of the Replacement Yakima Control Tower for Factory-installed Tracks # Y8890027 and 2 sets of the Landing Pad 1 for Yakima SkyLine and Control Towers # Y00221. For the tracks themselves, they come in 3 different sizes: - Yakima 42" Tracks for Roof Racks # Y01126 - Yakima 54" Tracks for Roof Racks # Y26RR - Yakima 60" Tracks for Roof Racks # Y01135 Since most truck...
  view full answer...
• Roof Rack Solution for Truck Topper Using Artificial Rain Gutters
  The components in the photo you referenced are from Yakima. Yakima's artificial rain gutters are the Side Loader Brackets # Y08002. The roof rack towers for the rain gutter system are the Yakima 1A Raingutter Towers # Y00101, which come in a quantity of 4. These towers are designed for use with the Yakima RoundBar crossbars. Yakima crossbars come in a variety of lengths. Depending on how much overhang of the crossbar you want, the Round 58 Inch Crossbars for Yakima Roof Rack Systems...
  view full answer...
  
• Alternate Mounting Hardware for Yakima SpaceBooster Cargo Box on 2015 Subaru Outback Wagon
  It is not a huge deal to add a few new mounting holes to the bottom of an ABS plastic cargo box like the Yakima SpaceBooster. A cordless drill and appropriately-sized drill bit will make short work of it. I would avoid using a heated implement for making the holes since it could be a bit messy and could make it harder to control the size of the hole. The things to keep in mind are that you want to drill no more additional holes than absolutely necessary so measure, check and re-check....
  view full answer...
• Yakima Roof Rack that Fits Roof Tracks on Leer Truck Canopy
  I spoke to my Yakima contact and he informed me that you will need the Landing Pad 1 # Y00221 for the tracks on your Leer camper. To complete your roof rack setup you will need: quantity 2 of the Landing Pad 1 # Y00221 quantity 4 of the Control Towers # Y8890027 and depending on the length of your cap quantity 2 Crossbars like: 48 inch # Y00408 58 inch # Y00409 66 inch # Y00410 78 inch # Y00411 To lock your roof rack to your tracks, I recommend the set of 4 lock cores with keys # Y07204.
  view full answer...
• Recommended Fairing for Rola Roof rack on a 2009 Honda Accord Sedan
  Yes! Out of the variety of fairings that we have to offer I recommend the 40" long Inno Fairing # INA261 because it will fit perfectly with the 38" long Rola Sport Series Roof Rack # 59757 for your 2009 Honda Accord. If you let me know what you are wanting to use the roof rack for I can make additional recommendations for you. I have also attached an installation video and a picture of this roof rack on a 2009 Accord Sedan that you can reference.
  view full answer...
  
• Roof Rack and Ski Carrier to Fit 2019 Hyundai Santa Fe with Naked Roof
  Yakima has a really great roof rack for your 2019 Hyundai Santa Fe with a naked roof with the Baseline JetStream bar rack part numbers # Y28TR, # Y06151, # Y06154, and # Y00425 (see attached picture). This will give you an extremely high quality roof rack that has aero bars which will give you minimal wind noise. Then for a ski rack we have the FatCat EVO part # Y03096 which will hold 6 skis or part # Y03095 for up to 4. I attached a review video for this carrier for you to check out as well.
  view full answer...
  
• Kayak Rack and Load Assist for a 2018 Toyota Prius Prime Without Glass Roof
  Hey, Nick! Happy to help out. The best and easiest kayak rack to use with a load assist is the Thule Hullavator Pro # TH898. One big advantage is that everything is built into the carrier itself, here are no extra parts to remove or store. Personally, I’m not a fan of other load-assist options like the Malone DownLoader # MPG114MD-351XL, since you have to store the Telos legs inside your vehicle while traveling. That’s especially inconvenient if you’re working with a smaller vehicle. I...
  view full answer...
• Recommended Roof Rack and Bike Rack for a 2016 Lexus GSF
  The best option to transport a bike with your 2016 Lexus GSF is going to be to install a roof rack and attach a bike rack. The trunk mounted ones like item # SA805BL have mixed results and won't work with cars with spoilers. It doesn't look like your Lexus has any rails so to add a roof rack you will need the following parts: Yakima JetStream Crossbars - Aluminum - Black - 50" Long - Qty 2 item # Y00425 BaseLine Towers for Yakima Crossbars - Naked Roofs - Qty 4 item # Y28TR BaseClip...
  view full answer...
• Which Yakima Roof Rack Fits 2022 Ford Maverick
  Hi Alvin, Nice choice going with the Yakima rack as they make really high-quality gear. As for the correct parts for your 2022 Ford Maverick, you can actually get everything combined with just one part number depending on the bars you want. You mentioned the FX, and that is a flush-style roof rack system, which means the bars only go the width of your roof with no overhang. The FX uses bars and towers that are combined, so they aren't actually separate; to go that route you'd just need...
  view full answer...
• Roof Rack With Longer Crossbars For 2023 Kia Sorento With Naked Roof
  Hello Katherine, thanks for reaching out. Yes, we do have a product that will work for you! The best option for this will be to go with a Yakima JetStream roof rack. The design of their bars and towers allows for longer than standard crossbars, so we can set you up with something longer. For the Yakima bars, a 60" crossbar will be the closest option for something longer than 56". Here are the parts you will need for the complete roof rack system: - Yakima JetStream Crossbars - Aluminum...
  view full answer...
• How Can I Tell if I have Fixed Mounting Points on My 2015 Mazda CX-5 for a Crossbar System?
  According to the specs I have, you may have fixed mounting points on those rubber strips on your 2015 Mazda CX-5. The way you can tell is if there is a small removable tab on those rails that cover the holes. I went ahead and attached a video of a 2015 Mazda CX-5 with fixed mounting points to give you perspective about what to look for. If you determine that you have fixed mounting points, I recommend the following setup: - Rhino-Rack Vortex Aero Crossbars - Aluminum - Black - 46" #...
  view full answer...
• How to Tell if Thule Hullavator Kayak Carrier Will Fit on a Tesla Model 3
  Both the current Hullavator Pro # TH898 and the older model, part 897XT that you have, require the crossbars to overhang the feet of the roof rack by 4" - 8" for their to be enough clearance to lower the carrier without making contact with any given vehicle. If you're Tesla Model 3 crossbars have a T-Slot, you still have the T-Slot mounting hardware, and the crossbars can achieve an overhang then you'll be good to go. The nice thing is that you already have this discontinued carrier so...
  view full answer...
• What is the Best 16 Cubic Foot Or More Cargo Box/Crossbars for My 2018 Nissan Murano SL?
  There are a couple options for a cargo box setup on your 2018 Nissan Murano SL with a bare roof. As far as the box, I recommend the Yakima SkyBox 16 Roof Cargo Box - 16 cu ft # Y95AV or the Yakima SkyBox 21 Rooftop Cargo Box - 21 cu ft # Y07337. The great thing about the SkyBoxes is that they include the SuperLatch system that ensures the lid is latched closed and locked. With this mechanism, the key cannot be removed unless the lid is closed properly. In addition, the SkyBoxes include...
  view full answer...
• Will Installing Track Roof Rack System on A.R.E. Topper Void Warranty
  Installing a track system roof rack like the Yakima parts # Y01126, # Y00221, # Y8890027, and # Y00410 won't void the warranty for your pickup but from what I could find it looks like modifying your A.R.E. topper will void that warranty. Since we aren't an A.R.E. dealer I can't really confirm this, but from my research it is very likely that your warranty will be void. So you can have the track system professionally installed but that would be your choice whether you want to pursue this...
  view full answer...
  
• Should Rear Bar Sit Higher Than Front Bar on Yakima Roof Rack System for 2017 Honda Pilot
  The front and rear Yakima JetStream Crossbars like # Y00426 should be level to each other on your 2017 Honda Pilot. Looking through the installation instructions for the BaseLine Towers # Y28TR and Fit Kit # Y00146 for your Honda Pilot, it does appear that the feet are positioned onto contours that are on the vehicle's roof. To compensate for this and to make sure the front and rear bars are not mounted at different heights, the pitch setting on the Yakima Feet need to be adjusted. I recommend...
  view full answer...
  
• Roof Rack Fit on 2012 Toyota Venza With Panoramic Sunroof
  There is one roof rack that is a confirmed fit for your 2012 Toyota Venza with a panoramic sunroof, though the sunroof should not be opened with the rack on. There isn't a roof rack available for your Venza that is going to allow normal use of the sunroof when the rack is on, but you can remove the rack if you like when you aren't using it in order to utilize the sunroof. The roof rack that fits your '12 Venza with a panoramic roof is an exceptionally nice one from Yakima, and consists...
  view full answer...
• Will the Thule Force XT L Fit My 2020 BMW X5?
  Yes, you will be able to fit the Thule Force XT L # TH6357B on your 2020 BMW X5's roof. Not only do you have enough roof for the required crossbar spread of 23-5/8 - 33 inches, you will also be able to mount the box to your roof and fully open your rear hatch. If you are wanting to go bigger, the Thule Force XT XL # TH6358B and XXL # TH6359B will fit as well. As far as mounting, you will need a crossbar system in order to secure the Force XT XXL to your roof. The setup you need depends...
  view full answer...
• Will a Yakima Roof Rack System Fit My 2020 Toyota Highlander LE?
  I confirmed with Yakima that mounting points that are on your bare roof of your 2020 Toyota Highlander will fit a roof rack system. After you pop off the tab that covers the mounting points, there is a screw that you will use to attach a roof rack system. I went ahead and attached a video that shows how you would attach a Yakima roof rack system on the 2020 Toyota Highlander. For the parts you need for that setup, you will need the following parts: - Yakima JetStream Crossbars - Aluminum...
  view full answer...
• Compatibility of 3 Bike Rack on 2015 Toyota Prius
  The Reese Q-Slot Platform-Style 2 Bike Rack is a fit for your 2015 Prius but has been discontinued. If you already have the rack it will work very well for you. I recommend using the included pin and clip for a secure fit in the hitch and then using a cable lock like # e98891 to secure your bikes to the rack. The 2 inch receiver only Reese Q-Slot Platform-Style 2 Bike and 4 Bike Rack PS63138 (also discontinued) was a 2 or 4 bike carrier, but would NOT work on your 2015 Toyota Prius...
  view full answer...
• Best Roof Rack for 2020 Kia Telluride With Naked Roof and How Does It Attach
  There are two roof configurations for a 2020 Kia Telluride, bare roof and flush side rails. The roof rack system for a bare roof attaches to the door jambs via car clips whereas the system for flush side rails attaches to the flush side rails. I recommend the Yakima JetStream Crossbar System part # Y00426, part # Y28TR, part # Y06125, and part # Y06165 if you have a bare roof. The Yakima Crossbar system is best because it has a custom fit for the best overall look, aero crossbars for...
  view full answer...
• Roof Rack and Board Carrier Recommendation for 2016 Toyota Prius V with Glass Roof
  For your 2016 Toyota Prius V you will need to install a roof rack to carry the boards you mentioned. Unfortunately only Yakima makes roof racks for your vehicle and they aren't exactly super cheap. So for that you would want the Yakima CoreBar part numbers # Y00425, # Y28TR, # Y06117, # Y06174. Which with that you'd be able to use the LockRack kpart # LR59FR that you referenced. This will attach to the crossbar by the top channel.
  view full answer...
• Roof Rack And Bed Cover Recommendation For 2024 Ram 2500 Big Horn Crew Cab
  Hello Nancy, thanks for reaching out. We do have roof rack options for your 2024 Ram 2500 big horn crew cab, but sadly we do not have a fit for the Thule wingbars, so you will need to go with something different. For that I recommend going with a Yakima JetStream roof rack. The JetStream aero bars will work great with your Hullavator so here is what I recommend: - BaseLine Towers for Yakima Crossbars - Naked Roofs - Qty 4 # Y28TR - BaseClip Fit Kit for Yakima BaseLine Roof Rack Towers...
  view full answer...
• Can Yakima Roof Rack From 2000 Ford F250 Be Used On A 2025 Ford F350?
  Hello Lori, thanks for reaching out. You may be able to re use certain components from your old Yakima roof rack, but I would need to know specifically what parts you have in order to say for sure. If you have the Yakima BaseLine towers like part # Y28TR, those could be used on the 2025 F350, you would just need a new fit kit # Y06185. You might be able to re use you crossbars but again it depends what you have. Yakima recommends a 58" or 60" crossbar for the 2025 F350. If you can tell...
  view full answer...
• What is Needed to Attach Yakima JetStream Crossbars to 2017 Honda CR-V With Bare Roof
  Hello Zeke, So we can get your 2017 Honda CR-V set up to mount Yakima JetStream Crossbars # Y00425, though there aren't actually different options for this. Reason for that is you can't mix and match different manufacturers parts because they won't fit together. That means to put the JetStream crossbars on the bare roof of your 2017 Honda CR-V you would have to use the following parts: - BaseLine Towers for Yakima Crossbars - Naked Roofs # Y28TR - BaseClip Fit Kit # Y06188 - BaseClip...
  view full answer...
• Recommended Roof Rack for 2013 Toyota Venza with Panoramic Glass Roof
  I do have a solution for you, however the Rhino-Rack roof rack that you referenced will not fit your 2013 Toyota Venza if it's equipped with the panoramic glass roof. None of the solutions from Rhino-Rack are compatible with the panoramic roof on your vehicle. I checked with Yakima though and they do state that their JetStream Crossbar system is compatible with the glass roof and will work great on your Venza. This roof rack consists of # Y00426 for the two 60 inch JetStream Crossbars,...
  view full answer...
• Yakima Roof Rack Parts List for a 2021 Dodge Durango with a Bare Roof
  Hey Kimlee, thanks for reaching out! Yes, the 60" # Y00426 JetStream Bars, BaseLine Towers # Y28TR, and 2 sets of the BaseClip Fit Kit # Y06180 will also fit your 2021 Dodge Durango with a bare roof (lock core kit # Y07204 optional). We do ship these to Canada as well!
  view full answer...
• Roof Rack Recommendation for 2018 Toyota Camry Hybrid with Sun Roof
  For your 2018 Toyota Camry Yakima has the CoreBar roof rack with aero shaped crossbars part numbers # Y00421, # Y28TR, and # Y06192 that can be used on vehicles with sun roofs. But Yakima states to keep it closed when the rack is installed. For a carrier to carry your two kayaks we have the Thule Stacker part # TH830 then that would work well. This rack will hold the kayaks on end. See install video I attached.
  view full answer...
• Recommended Roof Rack for a 2022 Honda Insight
  Hey Andy! The 50" crossbars on the Yakima BaseLine Roof Rack Kit item # Y88UB can be swapped out but the next largest size is the 60" Long item # Y00429 so I do not think that's going to be a viable option. By law the crossbars are not supposed to stick out past the rear view mirrors. If you want to pursue this option you'll need the following parts: BaseLine Towers for Yakima Crossbars - Naked Roofs - Qty 4 item # Y28TR BaseClip Fit Kit for Yakima BaseLine Roof Rack Towers - Qty 2 item...
  view full answer...
• Recommended Fairing for Rola Roof rack on a 2009 Honda Accord Sedan
  Yes! Out of the variety of fairings that we have to offer I recommend the 40" long Inno Fairing # INA261 because it will fit perfectly with the 38" long Rola Sport Series Roof Rack # 59757 for your 2009 Honda Accord. If you let me know what you are wanting to use the roof rack for I can make additional recommendations for you. I have also attached an installation video and a picture of this roof rack on a 2009 Accord Sedan that you can reference.
  view full answer...
  
• Can Thule Hullavator Install on Yakima Crossbars
  The Thule Hullavator Pro # TH898 can fit round bars by grabbing around the crossbar and can fit aero shaped bars if the bars have a channel on top of them. Which the Yakima aero shaped bars don't have top channels so to go the Yakima route will require round bars which includes the part numbers # Y00408, # Y53TR, # Y03536, and # Y00241 and you'd be set.
  view full answer...
• Recommended Yakima Roof Rack Upgrade for Subaru Factory Roof Rack
  The factory roof rack on the 2016 Subaru Outback Wagon has minimal options to fit the factory roof rack which is different than the factory side rails or flush mounted rails. You can use the Landing Pad 15 for Yakima Control Towers - Qty 4 # Y00241 which will allow you to simply remove your factory crossbars and mount these pads in their place. Then you can use the SkyLine Towers for Yakima Crossbars # Y53TR and round bar adapter # Y03536 if you want to use round bars like the 48 inch...
  view full answer...
  
• Towers for Yakima RoundBar on 2024 Honda CR-V Hybrid
  There are towers available that will allow you to install your Yakima RoundBars on your 2024 CR-V Hybrid. You will need the following: -SightLine Towers for Yakima Crossbars - Flush Side Rails - Qty 4 # Y64AR -RoundBar SL Adapter for Yakima BaseLine, SkyLine, TimberLine, and RidgeLine Towers - Qty 4 # Y03536 -SightClip Fit Kit for Yakima SightLine and RidgeLine Roof Rack Towers # Y44UR If you have Yakima Same Key System locks you can transfer them over or you can add new locks using...
  view full answer...
• What is the Best 16 Cubic Foot Or More Cargo Box/Crossbars for My 2018 Nissan Murano SL?
  There are a couple options for a cargo box setup on your 2018 Nissan Murano SL with a bare roof. As far as the box, I recommend the Yakima SkyBox 16 Roof Cargo Box - 16 cu ft # Y95AV or the Yakima SkyBox 21 Rooftop Cargo Box - 21 cu ft # Y07337. The great thing about the SkyBoxes is that they include the SuperLatch system that ensures the lid is latched closed and locked. With this mechanism, the key cannot be removed unless the lid is closed properly. In addition, the SkyBoxes include...
  view full answer...
• Will Installing Track Roof Rack System on A.R.E. Topper Void Warranty
  Installing a track system roof rack like the Yakima parts # Y01126, # Y00221, # Y8890027, and # Y00410 won't void the warranty for your pickup but from what I could find it looks like modifying your A.R.E. topper will void that warranty. Since we aren't an A.R.E. dealer I can't really confirm this, but from my research it is very likely that your warranty will be void. So you can have the track system professionally installed but that would be your choice whether you want to pursue this...
  view full answer...
  
• Will the Thule Force XT L Fit My 2020 BMW X5?
  Yes, you will be able to fit the Thule Force XT L # TH6357B on your 2020 BMW X5's roof. Not only do you have enough roof for the required crossbar spread of 23-5/8 - 33 inches, you will also be able to mount the box to your roof and fully open your rear hatch. If you are wanting to go bigger, the Thule Force XT XL # TH6358B and XXL # TH6359B will fit as well. As far as mounting, you will need a crossbar system in order to secure the Force XT XXL to your roof. The setup you need depends...
  view full answer...
• Will Thule Hullavator Fit a Yakima Roof Rack on a 2018 Subaru Outback
  The Thule Hullavator, # TH898, will fit on a Yakima roof rack so if you like the spacing and looks of the Yakima racks you can certainly go that route for your 2018 Subaru Outback. With the Hullavator the roof rack crossbars need to stick out past the mounting feet by at least 4 inches. What this means you will need to use longer bars than what would normally be recommended for the vehicle. If you go with a round bar system then you will need the following parts: Crossbars # Y00409 SkyLine...
  view full answer...
• Recommended Thule Aeroblade Roof Rack Recommendation for 2018 Toyota Tacoma
  47 inch long Thule aero bars would be too short to be used on your 2018 Toyota Tacoma. Thule recommends a 53 inch bar like the part # TH711400 with the feet part # TH710501 and the fit kit # TH145107.
  view full answer...
• Hitch, Bike Rack, Roof Rack, Kayak Carrier for 2022 Toyota Highlander LE
  The Curt hitch part # C99FR is a really great option for a trailer hitch for a bike rack and would be what I would recommend as the best. It's mostly hidden and has great towing capacities plus is made in the USA. The best bike rack for you will be the best one that fits your needs. Most people prefer the platform style bike racks as they are the easiest to load and carry the bikes in the most stable way. So one of my favorites is the Thule EasyFold XT part # TH903202 which is lighter...
  view full answer...
• Yakima Round Bar Roof Rack Components to Install Round Bars 2015 Toyota Sienna
  Hey Jim, the best alternative to the mounting hardware you have now would be the current Yakima roof rack components that they list for installing the round bars on your 2015 Toyota Sienna which is their Timberline kit that consists of part numbers # Y33TR and # Y03536. How do you like the longer crossbars?
  view full answer...
• Recommended Yakima Roof Rack for My 2010 Hyundai Genesis Coupe
  While we do have a great Yakima crossbar system that is confirmed to fit your 2010 Hyundai Genesis Coupe, Rhino-Rack does not have a roof rack option that fits your vehicle. With that being said, I saw that you were looking at the Yakima round crossbar system that includes the 58" Crossbars # Y00409. In order to have a complete setup with these crossbars that fit your roof, you also need the following parts: - RoundBar End Caps # Y8007026 - BaseLine Towers # Y28TR - RoundBar SL Adapters...
  view full answer...
• How to Get 58 Inch Yakima Round Crossbars For 2021 Toyota Corolla Hatchback
  Hey Roy, So to get the 58 inch Yakima round crossbars instead of the 48 inch it's pretty simple, you'll just need to order the parts separately. Here's exactly what you'll need for your 2021 Toyota Corolla Hatchback: - Yakima RoundBar Crossbars - Steel - Black - 58" Long # Y00409 - BaseLine Towers for Yakima Crossbars # Y28TR - BaseClip Fit Kit # Y06129 - BaseClip Fit Kit # Y06131 - RoundBar SL Adapter # Y03536
  view full answer...
• How to Carry Two Canoes on Roof of 2019 Honda Passport with Factory Crossbars
  Your best option is to use the Thule Compass Watersport Carrier # TH890000. The Compass is compatible with round, square, aero, elliptical, and most factory crossbars, including the ones on your 2019 Honda Passport. It can easily accommodate your two canoes, as long as their combined weight is not over 130 lbs, and they are not more than 36 inches wide (at their widest point). The Compass will allow you to carry your two canoes in a vertical (post-style) position so you have one on each...
  view full answer...
  
• Does Malone Square Bar Roof Rack # MPG203 Fit 2019 Toyota 4Runner
  Yes the Malone SteelTop roof rack part number # MPG203 would fit and work great on the roof of your 2019 Toyota 4Runner with raised rails.
  view full answer...
• Recommended Yakima Roof Rack for 2007 Honda Accord 4 Door
  For your 2007 Honda Accord you would simply select sedan for the 4 door version. The Yakima system for your vehicle will be the Baseline roof rack. The Q-Tower and Q-Clip fit kits were discontinued a few years back. My recommendation for you consists of the following Yakima parts: JetStream Crossbars - Aluminum - Black - 50" Long # Y00425 BaseLine Towers # Y28TR BaseClip Fit Kit (front) # Y06159 BaseClip Fit Kit (rear) # Y06143 I also recommend adding locks # Y07204
  view full answer...
• Yakima Roof Rack Components Needed to Install Roof Rack in Camper Top Channel
  The landing pad you would need is part # Y00221 which will fit your roof rack channels. For towers you need two of the part # Y00152 and a round bar adapter part # Y03536. For 58 inch crossbars you would want part # Y00409. For 78 inch long you'd want the part # Y00411.
  view full answer...
  
• Solution for Using Yakima RoundBar Crossbars With Q-Towers on 2024 Silverado
  Hi John; Yakima moved away from using the Q-Towers back in 2016. This means there are no Q-Clips that will fit your 2024 Silverado. Assuming you have a 1500/2500/3500 with the Crew Cab or Double Cab you will need the BaseLine Towers for Yakima Crossbars # Y28TR. You will also need the BaseClip Fit kit. For the 1500 that will be two of the # Y06110 and for the 2500/3500 the # Y27FR and # Y06124. The last thing you will need is the RoundBar SL Adapter for Yakima BaseLine, SkyLine, TimberLine,...
  view full answer...
• Recommended Roof Rack to Carry 2 Kayaks on 2014 Ford Focus
  We carry many roof rack and kayak carrier options for your 2014 Ford Focus. The roof rack that I recommend is the Yakima Q Tower roof rack that includes two 58 inch crossbars, # Y00409, the BaseLine Towers # Y28TR, RoundBar Adapters # Y03536, and BaseClips # Y06135 and # Y06105. This will provide you with two crossbars to mount your kayak carrier to. You can mount your kayak directly to the crossbars, but to prevent scratching your kayak, I recommend using kayak carriers like the Yakima...
  view full answer...
• Recommended Roof Rack for a 2024 Chevy Equinox w/ Factory Raised Side Rails
  Yes, there absolutely is! I have listed the parts below you will need to add a Yakima roof rack, with round bars, to your 2024 Chevy Equinox with factory raised side rails. Not sure what length of round bars you have so I threw in the ones we have for reference. TimberLine Towers for Yakima Crossbars - Raised, Factory Side Rails - Qty 4 item # Y33TR RoundBar SL Adapter for Yakima BaseLine, SkyLine, TimberLine, and RidgeLine Towers - Qty 4 item # Y03536 Yakima RoundBar Crossbars - Steel...
  view full answer...
• Can Yakima Round Crossbars Be Used On A 2018 Toyota Prius Prime?
  Hello Ed, thanks for reaching out. It is possible to use Yakima round bars on your 2018 Toyota Prius Prime. Yakima recommends a 48" bar for the 2018 Prius, so as long as your bars are 48" or longer they can be used. Aside from the bars, you will need the following: - BaseLine Towers for Yakima Crossbars - Naked Roofs - Qty 4 # Y28TR - BaseClip Fit Kit for Yakima BaseLine Roof Rack Towers - Qty 2 # Y06123 - BaseClip Fit Kit for Yakima BaseLine Roof Rack Towers - Qty 2 # Y06169 - RoundBar...
  view full answer...
• Parts Needed to Install Round Yakima Crossbar Roof Rack on 2020 Toyota Highlander
  Hey Michael, it sounds like you have a set of round Yakima crossbars (among other things) that you'd like to reuse on your 2020 Toyota Highlander that has factory fixed mounting points. For that the complete rack with everything including the bars would normally be the part # Y63FB but since you have the bars already what you'd want is the part numbers # Y53TR, # Y46VR, and # Y03536 which is everything you'd need minus crossbars. If you have a different setup currently let me know and...
  view full answer...
• Recommended Round Bar Roof Rack for a 2024 Honda CRV w/ Flush Rails
  Yes, you can! The SightClip Fit Kit item # Y44UR and the SightLine Towers for Yakima Crossbars item # Y64AR will allow you to install your Yakima Roudbars to your CRV's flush rails. You will also need the RoundBar SL Adapter for Yakima Towers item # Y03536.
  view full answer...
• Roof Rack and Cargo Box Recommendation for 2017 Honda Accord Sedan
  The Yakima roof rack you referenced part numbers # Y00408, # Y28TR, # Y03536, and # Y06148 is a confirmed fit for your 2017 Honda Accord sedan and would be an excellent option for carrying a roof cargo box. Then for a cargo box the Thule Force part # TH6357B would fit this rack and work great. I attached a review video for this box installed on a similar sized vehicle as your Accord sedan. I really like the Thule roof racks and cargo baskets as they are very well made, easy to use, and...
  view full answer...
• How Can I Tell if I have Fixed Mounting Points on My 2015 Mazda CX-5 for a Crossbar System?
  According to the specs I have, you may have fixed mounting points on those rubber strips on your 2015 Mazda CX-5. The way you can tell is if there is a small removable tab on those rails that cover the holes. I went ahead and attached a video of a 2015 Mazda CX-5 with fixed mounting points to give you perspective about what to look for. If you determine that you have fixed mounting points, I recommend the following setup: - Rhino-Rack Vortex Aero Crossbars - Aluminum - Black - 46" #...
  view full answer...
• Ski Rack and Roof Rack Recommendations for a 2018 Subaru Legacy
  How you transport is really up to you. Your 2018 Subaru Legacy is still extremely new, so fits are being added all the time, and Subarus have a reputation for being incredibly flexible. If you want to go with the full rack, or have other possible items to carry like bikes, kayaks or cargo, I recommend using a Yakima roof rack system. This has the added benefit of letting you use a wide variety of accessories and adds a more rough and tumble look to the car. To add this kit to your vehicle,...
  view full answer...
• Components Needed To Mount Yakima RoundBars On A 2024 Kia Seltos With A Naked Roof
  Hey Jason, Yes, you can get the Yakima BaseLine Roof Rack for Naked Roofs # Y64PJ without the crossbars, you'll just need to order each component separately: BaseLine Towers for Yakima Crossbars # Y28TR RoundBar SL Adapter # Y03536 BaseClip Fit Kit # Y06130 (front clips) BaseClip Fit Kit # Y06132 (rear clips) If you need anything else or if you have factory rails let me know.
  view full answer...
• Yakima Jetstream Roof Rack for Use with Thule Hullavator TH898 on 2018 Toyota Highlander
  The Thule Hullavator load-assisted kayak carrier # TH898 will directly mount onto just about any roof rack bar shapes, including round, square, aero, elliptical, most factory crossbars, and most crossbars with top "T-slot" channels. Yakima Jetstream bars will work fine so long as they are long enough. The most important compatibility requirements for mounting the Hullavator are that the cross bars extend out past the rack legs and by no less than 4 -inches and that they be at least 24-inches...
  view full answer...
  
• Recommended Kayak Carrier for 2020 Mazda CX-5
  The only hitch mounted option wouldn't be an actual carrier, but a support like the Malone Axis # MAL32VR. This would require the installation of a trailer hitch like the # 76138 you looked at. More than likely you won't need this to mount your kayaks on your 2020 Mazda CX-5. Your kayaks will fit completely on a roof rack with a kayak carrier like the one seen in the picture below unless they are incredibly long. If that is the case, then by all means you could add the # MAL32VR to help...
  view full answer...
  
• Recommended Roof Rack For A 2021 Kia Seltos With A Naked Roof
  Yes there is, so for your 2021 Kia Seltos I recommend taking a look at the: -Yakima JetStream Crossbars # Y00425, with the BaseLine Towers for Yakima Crossbars # Y28TR, and the BaseClip Fit Kit for Yakima BaseLine Roof Rack Towers # Y06130 & # Y06132. The great part about this rack, apart from the 165-lbs weight capacity, is that it will also work great with naked roofs like what's on your 2021 Kia Seltos by using the DropHook clip holder. I have also included an installation video on...
  view full answer...
• Recommended Roof Rack for a 2023 Mazda CX-5 to Use the Thule Hullavator Pro Kayak Carrier
  In order to use the Thule Hullavator Pro # TH898 on your 2023 Mazda CX-5 you will need to have a roof rack with crossbars that extend 4"-8" past the roof rack feet. If you have a roof that has no existing crossbars or rails, I recommend the 2023 Mazda CX-5 Roof Rack by Yakima which consist of the: - Yakima HD Crossbars # Y01156 - BaseLine Towers for Yakima Crossbars # Y28TR - HD Bar SL Adapter # Y03541 - BaseClip Fit Kit # Y06130 - BaseClip Fit Kit # Y06154 If you have flush mounted...
  view full answer...
• Comparing Yakima Baseline and Skyline Towers on 2015 Mazda CX-5
  When comparing the height of each option, the lowest Yakima Roof Rack for your vehicle consists of the Yakima RoundBar SL Adapter # Y03536 to utilize your previous Yakima round bars, the BaseLine Towers # Y28TR, the BaseClip Fit Kit # Y06130 and # Y06132. Overall this system will be about an inch shorter than the Skyline tower and base option.
  view full answer...
• Will the Yakima SteelHead Roof Mounted Bike Carrier Fit Aero Crossbars on a 2017 Toyota Highlander
  In order to use the Yakima SteelHead Roof Mounted Bike Carrier on your 2017 Toyota Highlander you would need to install a round bar system like the Yakima Roof Rack System part # Y00408, part # Y53TR, part # Y03536, and part # Y00242 if you have flush side rails or the Yakima Roof Rack System part # Y00409, part # Y28TR, part # Y03536, and part # Y06130 if you have a bare roof. If you want to keep the roof rack you have now then I recommend selling the SteelHead and buying the Yakima...
  view full answer...
• Base Clips For Yakima Roof Rack Towers On A 2018 Toyota Corolla
  It looks like all of the Yakima roof racks that are confirmed to fit your 2018 Toyota Corolla use BaseClip Fit Kit for Yakima BaseLine Roof Rack Towers # Y06130 and BaseClip Fit Kit for Yakima BaseLine Roof Rack Towers # Y06170. To confirm, you can give me more information about your roof rack that you have and I will make sure this is the correct clip set. I have attached a demonstration video to show you how these clips install.
  view full answer...
• Will the Malone DownLoader Fit on Yakima Roof Rack Crossbars
  Yes, the Malone DownLoader # MPG114MD-351XL is designed to fit on virtually all available aftermarket crossbar shapes and most factory bars, so this would work well with a Yakima roof rack like the one for a 2016 Avalon that uses parts # Y00425, # Y28TR, # Y06130, # Y06131. The DownLoader is an awesome solution to help make loading and unloading your kayak a breeze, and the system comes with cam buckle load straps to help you secure the boat. I've linked some review videos of these parts...
  view full answer...
• Roof Rack Recommendation to Carry Thule Pulse Box on 2018 Toyota Highlander
  In order to carry the Thule Pulse Large Rooftop Cargo Box # TH615 on your 2018 Toyota Highlander you will need crossbars that are perpendicular to your vehicle body so that the box can be parallel with the vehicle body. I really like the Yakima JetStream roof rack system because the crossbars are higher quality with that aero-style design and the legs have adjustments so you get the best fit possible. I'm guessing you have a naked roof but in the event that you do have the flush mount rails...
  view full answer...
• Yakima Roof Rack Components Recommendation to Fit 2019 Mazda CX 5
  The Yakima Landing Pad 19 # Y00245 that you referenced has been confirmed by Yakima to fit the Skyline and Control Towers like you mentioned. Glad it worked for you as well! For the 2019 Mazda CX-5 Yakima recommends the BaseClip part # Y06130 and part # Y06154 when used with JetStream bars # Y00425 and BaseLine Towers part # Y28TR.
  view full answer...
• Yakima Roof Rack Landing Pad 16 Wont Line Up On 2019 Toyota Highlander
  There are two roof configurations on a 2019 Toyota Highlander, bare roof and flush side rails. The Landing Pad 16 part # Y00242 is designed for models with flush side rails. If you have a bare roof you need to use the BaseClip Fit Kit part # Y06130. I think you might be looking at the pre-drilled holes in the roof used to attach the flush side rails from the factory and if so these can't be used and you would have to use the rack for bare roof models. I have attached a video below of the...
  view full answer...
• Best Roof Rack and Kayak Carrier for a 2019 Hyundai Tuscon w/ Bare Roof
  I would be happy to help you set your 2019 Hyundai Tucson up to transport your kayaks. You are going to need a roof rack but lets start with the kayak carrier. I recommend the Thule Compass Kayak and SUP Carrier w/ Tie-Downs - J-Style, Post Style, or Saddle - 2 Kayaks or SUPs item # TH890000. The Compass allows you to transport two kayaks on your roof rack crossbars. You will be able to carry in the stacker, J-style, or saddle position to maximize usable space on your crossbars. This carrier...
  view full answer...
  
• Recommended Roof Rack to Use the Yakima SideWinder on a 2018 Toyota Highlander LTD
  I recommend installing a Yakima JetStream roof rack on your 2018 Toyota Highlander because they provide a clean looking installation that allows you to utilize the full 165 lb weight capacity and can be keyed alike with your SideWinder # Y02071. If you have a naked roof (no rails running from front to back) then you need the 60" JetStream Bars # Y00426 the BaseLine Towers # Y28TR, and the BaseClip # Y06130. For flush mount rails you would instead need the 50" JetStream Bars # Y00425,...
  view full answer...
• Recommended Roof Rack System For 2015 Mazda 3 For a Roof Top Tent
  I would be happy to recommend a roof rack for your 2014 Mazda 3 5 Door Hatchback for carrying a 165lb Roofnest Rooftop Tent. If your Mazda 3 has fixed mounting points on the roof I recommend the Yakima Roof Rack System which uses 50" Yakima JetStream Crossbars # Y00425, SkyLine Towers for Yakima Crossbars # Y53TR, and Landing Pads # Y00248. If your Mazda 3 does NOT have fixed mounting points then I recommend the Yakima Roof Rack System which uses 60" Yakima JetStream Crossbars - Aluminum...
  view full answer...
• Recommended Roof Crossbars and J-Style Kayak Carrier for a 2018 Toyota Corolla
  We have just what you need for your 2018 Toyota Corolla! I recommend checking out the Yakima JetStream Crossbars # Y00425 with the BaseLine Towers for Yakima Crossbars # Y28TR, & the BaseClip Fit Kit for Yakima BaseLine Roof Rack # Y06130 & # Y06170. These crossbars will easily attach to your Corolla's naked roof, has a 165-lbs weight capacity, and will allow you to use a set of J-Style kayak carriers like the Thule Compass Kayak Roof Rack w/ Tie-Downs # TH890000. Since you're interested...
  view full answer...
• Rear Yakima Roof Rack Bar Sits Higher than Front Bar on a 2016 Toyota Avalon
  You will want the Yakima roof rack on your 2016 Toyota Avalon as level as possible, but due to the different strength points on a roof and the differing heights of the towers it isn't uncommon for crossbars to be a little out of level with each other. They shouldn't be so far out of level that is causes issues with accessories fitting though, which is the main concern. With all of that being said, it is always a good idea to double check your installation just to make sure you have everything...
  view full answer...
• Roof Rack System Similar to the Yakima Whispbar for a 2017 Subaru Legacy
  I do have a similar roof rack system for your 2017 Subaru Legacy but the Yakima Whispbar Roof Rack System has since been discontinued in favor of the Yakima JetStream Roof Rack System. In order to mount the Yakima JetStream Roof Rack System to the roof of your vehicle you will want to use part # Y00426, part # Y28TR, part # Y06145, and part # Y06130. I have added a review video of this system for you as well.
  view full answer...
• Can Yakima SkyRise Tent be Used with 2018 Mazda CX-5 AWD
  The Yakima SkyRise Tent # Y07436 will work great on your 2018 Mazda CX-5 but you will need a roof rack with at least a 165 lb capacity. If the roof of your 2018 Mazda CX-5 has flush rails that run front to back you'd want the Yakima Jet Stream rack part numbers # Y00425, and # Y64AR, # Y39AR If you have a naked roof you'd want the part numbers # Y00425, # Y28TR, # Y06130, and # Y06154. If you have rails that run front to back that are raised up you'd want the Malone rack part # MPG215....
  view full answer...
• Recommended Roof Rack For A 2019 Toyota Highlander To Carry A Thule Hullavator 898
  In order to use the Thule Hullavator Pro Kayak Carrier and Lift Assist with Tie-Downs - Side Loading, part # TH898, on the roof rack of your 2019 Toyota Highlander, the crossbars need to extend between 4" and 8" past the the towers/feet. My recommendation would be to go with a 60" crossbar for your roof rack. I have two roof rack recommendations for you. The first rack is for a Highlander with flush rails. It will consist of the following items: Yakima CoreBar Crossbars - Steel - Black...
  view full answer...
  
• Need Replacement Pads for Yakima Baseclip 130.
  We do carry the BaseClip Fit Kit for Yakima BaseLine Roof Rack Towers part # Y06130 this is the clip and the contact pad for the Yakima roof rack systems and will come with two 130 clips and the appropriate pads. I do not have them available seperately.
  view full answer...
• Recommended Rack For 2016 Toyota Highlander For A Thule Hullavator And Rear Loading Kayak Carrier
  In order for you to carry two kayaks, one on a Thule Hullavator, part # TH898, and the other a rear loading kayak carrier, you will need longer crossbars. Your crossbars will also need to extend between 4" - 8" beyond the tower, foot, leg of your roof rack. You will not be able to use a factory roof rack with a Thule Hullavator. If your 2016 Toyota Highlander has flush rails, your recommended roof rack will consist of the following: Thule WingBar Evo Crossbars - Aluminum - Black -53"...
  view full answer...
• How to Get 58 Inch Yakima Round Crossbars For 2021 Toyota Corolla Hatchback
  Hey Roy, So to get the 58 inch Yakima round crossbars instead of the 48 inch it's pretty simple, you'll just need to order the parts separately. Here's exactly what you'll need for your 2021 Toyota Corolla Hatchback: - Yakima RoundBar Crossbars - Steel - Black - 58" Long # Y00409 - BaseLine Towers for Yakima Crossbars # Y28TR - BaseClip Fit Kit # Y06129 - BaseClip Fit Kit # Y06131 - RoundBar SL Adapter # Y03536
  view full answer...
• Recommended Roof Rack for a 2024 Toyota Corolla Hatchback w/ No Rails or Crossbars
  To add a roof rack to your 2024 Toyota Corolla Hatchback that does not stick over the sides, I recommend the roof rack by Yakima which includes the following parts: Yakima BaseLine FX Roof Rack for Naked Roofs - Aero Crossbars - Aluminum - Black - Qty 2 item # Y69UV BaseClip Fit Kit for Yakima BaseLine Roof Rack Towers - Qty 2 item # Y06129 BaseClip Fit Kit for Yakima BaseLine Roof Rack Towers - Qty 2 item # Y06131 This aero bar roof rack system has a 165 lbs capacity. I recommend adding...
  view full answer...
• Correct Yakima Towers to Use with Existing Round Crossbars on 2019 Hyundai Kona with Bare Roof
  The correct Yakima towers to use on the bare roof of your 2019 Hyundai Kona are indeed the BaseLine Towers # Y28TR that you referenced. These are the only Yakima towers that will work on your particular vehicle. To use these with your existing round bars you will just need to add the RoundBar SL Adapter # Y03536. This kit includes all 4 of the needed adapters for each of the towers. In addition to the towers themselves you will also need the Front Fit Kit # Y06175 and the Rear Fit Kit...
  view full answer...
• Will the Malone DownLoader Fit on Yakima Roof Rack Crossbars
  Yes, the Malone DownLoader # MPG114MD-351XL is designed to fit on virtually all available aftermarket crossbar shapes and most factory bars, so this would work well with a Yakima roof rack like the one for a 2016 Avalon that uses parts # Y00425, # Y28TR, # Y06130, # Y06131. The DownLoader is an awesome solution to help make loading and unloading your kayak a breeze, and the system comes with cam buckle load straps to help you secure the boat. I've linked some review videos of these parts...
  view full answer...
• Recommended Roof Rack for 2019 Hyundai Kona without Side Rails
  I checked with Yakima and they do have a roof rack system available that is designed to fit your 2019 Hyundai Kona that has a completely naked roof without any side rails. For this you will just need part # Y00425 for the 50" JetStream Crossbars, # Y28TR for the BaseLine Towers that mount directly to the vehicle's bare roof, # Y06175 for the Front BaseClip Fit Kit, and # Y06131 for the Rear BaseClip Fit Kit. This will provide you with an excellent, durable, and quiet roof rack because...
  view full answer...
• Yakima Roof Rack For 2021 Hyundai Kona With Bare Roof to Carry Kayak
  The correct Yakima roof rack for your 2021 Hyundai Kona with a bare roof is made up of the following parts: Naked Roof - Yakima JetStream Crossbars - Silver # Y00428 or Black # Y00425 - BaseLine Towers for Yakima Crossbars # Y33TR - BaseClip Fit Kit for Yakima BaseLine Roof Rack Towers # Y06175 - BaseClip Fit Kit for Yakima BaseLine Roof Rack Towers # Y06131 For added protection, I recommend considering adding locks to the rack with the Same Key System Lock Cores # Y07204. Once you have...
  view full answer...
• 2012 Toyota Venza Panoramic Roof Carrying Weight Capacity
  I wouldn't recommend resting any weight whatsoever directly upon the glass panels that make up the panoramic roof of your Venza. The glass that makes up that sunroof is very expensive to replace. If you're wanting to carry cargo on the roof, your best bet would be to use a Yakima Q-Tower roof rack and a small cargo basket like the Thule # TH859XT. According to Yakima, when installed on the Venza, the roof rack will have a 125 lb capacity and would consist of the following parts: 58 inch...
  view full answer...
• Rear Yakima Roof Rack Bar Sits Higher than Front Bar on a 2016 Toyota Avalon
  You will want the Yakima roof rack on your 2016 Toyota Avalon as level as possible, but due to the different strength points on a roof and the differing heights of the towers it isn't uncommon for crossbars to be a little out of level with each other. They shouldn't be so far out of level that is causes issues with accessories fitting though, which is the main concern. With all of that being said, it is always a good idea to double check your installation just to make sure you have everything...
  view full answer...
• Roof Rack Recommendation for 2020 Hyundai Kona With No Side Rails
  For your 2020 Hyundai Kona I do have a roof rack that's confirmed to fit. The Yakima Roof Rack, which is going to consist of Yakima JetStream Crossbars # Y00425 bars, the BaseLine Towers for Yakima Crossbars # Y28TR, BaseClip Fit Kit for Yakima BaseLine Roof Rack Towers # Y06175 and BaseClip Fit Kit for Yakima BaseLine Roof Rack Towers # Y06131. The Yakima JetStream bars are extremely quiet, because they have an aerodynamic design, they are 50" long so you'll have plenty of room to mount...
  view full answer...
• Roof Rack Placement and Recommendations for a 2009 Toyota Venza with Naked Roof
  The roof rack options for a 2009 Toyota Venza include custom fit kits that must be placed in certain locations on the vehicle. The measurements for them are included in the installation instructions. Regarding bar spread (the center to center distance from one crossbar to the other) on your Venza it will be 27-1/2 to 33 inches apart depending on the roof rack you choose. A wider spread offers more stability. For a 33 inch bar spacing I recommend the following set up: Yakima CoreBar Crossbars...
  view full answer...
• Wider Spread Roof Rack Recommendation for 2015 Toyota Venza with Naked Roof
  The only wider crossbar roof rack we have available for your 2015 Toyota Venza is the Yakima part numbers # Y00409, # Y28TR, # Y03536, # Y06129, and # Y06131 that you mentioned which has 33 inches of crossbar spread. Most Thule roof accessories that are designed for square bars are also designed for round bars so this should still work great for you.
  view full answer...
• Recommended Aero-Style Roof Rack for a 2018 Toyota Avalon with Bare Roof
  I have a great solution for you, but unfortunately Thule does not make any roof rack systems that will fit your 2018 Toyota Avalon. Although, for a similar design and high standard of quality manufacturing, I recommend the following Yakima roof rack setup: - Yakima JetStream Crossbars - Aluminum - Black - 50" Long - Qty 2 # Y00425 - BaseLine Towers for Yakima Crossbars - Naked Roofs - Qty 4 # Y28TR - BaseClip Fit Kit for Yakima BaseLine Roof Rack Towers - Qty 2 # Y06130 - BaseClip Fit...
  view full answer...
• How to Transport Bikes and Luggage with my 2020 Hyundai Kona Electric
  No, the Curt hitch part # C11529 you referenced will not fit on the electric models of the Kona and we don't have a hitch that will. To help haul your gear I do have another option available for you and that would be a roof rack system. This will allow you to add roof mounted bike racks and cargo carriers to the roof of your Kona and give you the storage you are lo0king for. If you have flush mounted rails that run front and back on your roof you would use part # TH712300, # TH710601,...
  view full answer...
• Recommended Yakima Roof Rack for 2016 Toyota Avalon
  It all depends on what Yakima equipment you already have to determine whether the components will work on our 2016 Toyota Avalon. You clearly want to use as much that you already have and not have to purchase anymore than you need. There are a number of Yakima roof rack systems compatible with your 2016 Toyota Avalon. The towers that are specific to your car are the Yakima Baseline Towers # Y28TR and the BaseClips # Y06130 and Y06131. They will fit your car, it's just a matter of whether...
  view full answer...
• What Roof Rack do You Recommend for My 2020 Hyundai Kona Hybrid?
  I have the exact setup you need for your 2020 Hyundai Kona Hybrid with a bare roof. Since the only roof rack system we have is manufactured by Yakima, I confirmed with them that they do not differentiate between roof styles on electric models and regular models. With that being said, the same roof rack that is constructed for a 2020 Hundai Kona's bare roof fits both model types. For a great roof rack for your vehicle, I recommend the following parts: - Yakima JetStream Crossbars - Aluminum...
  view full answer...
• Yakima Roof Rack System For a 2019 Toyota Corolla Hatchback Naked Roof
  You will need the following parts for installing a Yakima roof rack on your 2019 Toyota Corolla hatchback. Yakima JetStream Crossbars # Y00425 BaseClip Fit Kit # Y06129 BaseClip Fit Kit # Y06131 BaseLine Tower # 8880618 Qty: 4 Torque Wrench # 8881045 You can use the Yakima Same Key System to secure the bars. We have a set with 4 Locks # Y07204 to secure just the towers or a set with 8 Locks # Y07208
  view full answer...
• Roof Rack Recommendation that Fits 2011 Toyota Venza with Sunroof
  Yakima has a roof rack that fits the 2011 Toyota Venza with a naked roof and a sunroof, but Thule does not have any fits so I can't recommend any of them for you. For an aero style roof rack that fits you'd want the Yakima Corebar roof rack part numbers # Y00422, # Y28TR, # Y06129, and # Y06131 which is a confirmed fit.
  view full answer...
• How to Carry Cargo or Use Bike Rack With 2019 Toyota Corolla Hatchback
  While there is a fantastic option to carry cargo with your 2019 Toyota Corolla Hatchback, there are currently no trailer hitches available for this vehicle. If you were looking for a way to haul cargo as opposed to towing with this your car, I strongly recommend a roof rack, which will let you you use the same type of accessories as a hitch, not to mention give your '19 Corolla Hatchback a cool aesthetic. The roof rack I strongly recommend is from Yakima and consists of: - Yakima JetStream...
  view full answer...
• What is the Best-for-the-Price Roof Rack and Ski Carrier for My 2021 Hyundai Kona?
  The best economical roof rack for your 2021 Hyundai Kona depends on whether your vehicle has a bare roof or flush factory rails. If your Kona has a bare roof, I recommend the following setup: - Round 48" CrossBars for Yakima Roof Rack System # Y00408 - BaseLine Towers for Yakima Crossbars - Naked Roofs # Y28TR - BaseClip Fit Kit for Yakima BaseLine Roof Rack Towers - Qty 2 # Y06131 - BaseClip Fit Kit for Yakima BaseLine Roof Rack Towers - Qty 2 # Y06175 - Yakima Same-Key Lock Cores #...
  view full answer...
• Is Rhino Rack Roof Rack Compatible with 2011 Toyota Venza with Sunroof
  Sounds like your 2011 Toyota Venza has a panoramic glass roof. Currently Rhino-Rack has no roof rack that is a fit for the panoramic glass roof. However we do have a solution for you. The Yakima roof rack, which consists of parts 58" crossbars # Y00409, BaseLine Towers # Y28TR, RoundBar Adapters # Y03536, and BaseClips # Y06129 and # Y06131 is a confirmed fit for your Venza. Please consult the vehicle owners manual and/or Toyota for the roof weight carrying capacity prior to loading.
  view full answer...
• What Kayak Lift Assist Option Can I Use On My 2013 Toyota Avalon
  You need to install a roof rack on your 2013 Toyota Avalon. The Thule Hullavator is compatible with your vehicle. Unfortunately, any roof rack for your vehicle will clamp to the frame of the vehicle. The roof rack that I recommend for your 2013 Toyota Avalon will consist of the following: Yakima CoreBar Crossbars - Steel - Black - 60" Long - Qty 2, part # Y00422 BaseLine Towers for Yakima Crossbars - Naked Roofs - Qty 4, part # Y28TR BaseClip Fit Kit for Yakima BaseLine Roof Rack Towers...
  view full answer...

Do you have a question about this Roof Rack?