Video Transcript for Breaking Down the RV Roller Drawer Guides

Ellen: Hey everyone. I'm Ellen here at etrailer.com. And today we're going to be taking a quick look at the RV roller drawer guides. These are going to help you to, or help your drawer to slide along easily without squeaking or making too much noise. And it's just going to be a little plate with a little piece there to help it slide along. So you can take a little closer look at it.

It's also going to come with the hardware to mount it in place. So you don't have to pick up any hardware on your own. Should come with plenty to get this installed, actually more than plenty. So you can see there's going to be this little disc for our drawer to slide along. That's going to rotate.

Try to get it at an angle. You can actually see that it moves along really easily. So as your drawer passes over that, it just helps it to move freely and easily.We'll get six screws. You really only need two, at least as far as the holes that are already drilled in there to mount that in place. As far as the size of these little guides, they are about one and five eighths inch long.

Let me get this to stay still for you. One and five eighths inch by about just over three quarters of an inch, almost seven eighths, and tab at the top is about three quarters of an inch. The disc is just about three quarters of an inch in diameter.You do get two guides, so you can put one on either side of your drawer and keep it rolling smoothly. These are most often going to be found on your Delta systems, but they can really be used just about anywhere with just about any kind of drawer.That's going to do it for our look at the RV roller drawer guides. I hope this video has been helpful in determining if these are the right piece for you.

We do have a lot of accessories and replacement parts for RVs here at etrailer.com. So hopefully we have something to get you out and enjoy your adventure again. Thanks for watching.