Sleek RV bathroom faucet has 1/4-turn stems that prevent leaks. Low-flow aerator conserves your water supply while you're dry camping by reducing the flow of water without compromising water pressure. Includes mounting hardware.
Features:
Specs:
To install, use the inlet shanks to drop the new faucet in place of your existing faucet. Then tighten the included mounting nuts against the underside of the counter, and connect the hot and cold water lines. You'll need to keep some tub and tile caulk (not included) on hand to help prevent any leaking.
California residents: click here
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Today we're going to take a look at the Phoenix Faucet's Catalina RV bathroom faucet with the dual lever handles and the brushed nickel finish. Now this is a Catalina Series faucet that will let you upgrade your bathroom faucet in your RV or camper. This one's a dual handle design with the lever style handles. And, what's nice is they use a quarter turn cartridge stem which enables the faucet to fully turn on and off with just a quarter of a turn. And they are a washerless design so they do reduce friction and daily wear for long-lasting durability.If you notice on the spout, it has a low flow aerator that reduces the flow of water. Helps conserve your water supply.
And the whole faucet is a non-metallic ABS plastic construction. Uses a spin-welded Celcon thermoplastic underbody. This faucet has a nice brushed nickel finish that provides a nice, sleek look. It is a two hole, or a three hold installation. The inlet shanks right here have the standard male NPSN connections.
It does include the two mounting nuts with the rubber gaskets for installation. And it does require tile and tub caulk, which is not included.Flow rate on this faucet is 1.2 gallons per minute. And I do want to give you some dimensions on this. Overall dimension or width with these handles in this position. You'll be looking at edge to edge right at nine and a half inches wide.
Total depth from the bottom, so when this would be installed from the bottom of the base to the top of the handle. It's going to be right at three and a half inches tall. Total depth, which would be from the back of the base to the edge of the spout like right there. Right there you'd be looking at right at six inches deep. Just the spout length, in other words, from the edge of the spout to the front of the base.
That's going to be right at four inches.The base itself, the dimension, the width of it is going to be right at six and a quarter inches wide and the total depth on it is right at two and three-eights inches deep. Now the inlet shanks for the hot and cold water, distance between them is your standard center to center four inch measurement. And the length on the shanks are right at two inches long. But that should do it for the review on the Phoenix Faucet's Catalina RV bathroom faucet with the dual lever handles and the brushed nickel finish.
great service
It was perfect
Thank you for your good service Greg s
Info for this part was:
At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.