Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Sleek RV bathroom faucet has 1/4-turn stems that prevent leaks so you won't have to worry about wasted water. Washerless design reduces daily wear and tear to help extend the life of your faucet. Includes mounting hardware.
Features:
Specs:
To install, use the inlet shanks to drop the new faucet in place of your existing faucet. Then tighten the included mounting nuts against the underside of the counter, and connect the hot and cold water lines. You'll need to keep some tub and tile caulk (not included) on hand to help prevent any leaking.
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Today we're going to be taking a look at the Phoenix Faucets, 4 inch dual handle RV bathroom faucet. This unit adds or replaces a bathroom faucet in your RV. It's a completely lead free design. It's going to feature the dual teacup handles that gives the unit a really nice look. It's going to feature a quarter turn design, very nice and easy to operate. They do have the hot and cold water indicators on them.
If you look right here, you're going to notice a red ring, and a blue ring for hot and cold. The unit's made from the plastic construction and features a rubbed, bronze finish. It's going to come with a low flow aerator already installed. That has a flow rate of 2.2 gallons per minute. The mounting area does require two holes for the installation. These connection points are the connectors for the hot and cold water lines.
They are separated on center by 4 inches, and they give us a length measurement of right around 2 inches long. Those are going to have an outer diameter of 13.167 inch, with an inner diameter of a half inch. Take a look at the measurements here of the base, front to back is about 2 and 1/8th. Side to side, that's going to give us a measurement of about 6 and 1/8th to 6 and 1/4 right in that area. Then if we take a measurement of the height, so measuring from the mounting surface to the tallest point of the unit, that's actually going to right here at the handle.
If we do that, we can see that that's going to give us a measurement of pretty close to 3 1/2 inches, maybe 3 5/8ths of an inch. If we take a measurement from front to back, so very back of the unit to the outermost point of the unit, that's going to give us a measurement, looks to be just over 5 inches, about 5 1/8th, to 5 1/4. Then the water outlet height, so measuring from the bottom of the aerator to the mounting surface, that's going to give us a measurement of 7/8th to 1 inch. Pretty simple installation, again it's going to require 2 mount holes. Those need to have a diameter of 1 inch, and separated on center by 4 inches. It does come with the mounting nuts, and the large backing plate.
That's a one piece design. The unit's also going to come with your detailed installation instructions. These are going to walk you through that process step by step. On this side, you're going to have some operating instructions and some helpful hints. On the back you're going to have a detailed breakdown of the parts list. That's going to do it for today's look at the Phoenix Faucets 4 inch, dual handle RV bathroom faucet.
Ratings & Reviews

Dawn
10/23/2020
Unfortunately, this faucet leaked after less than a year. We discovered a crack in the housing. However, etrailer replaced it at no cost. So far, the replacement is good.

Bonnie
8/13/2026
It is great. No issues. Looks great too!

Info for this part was:
At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.




Mike
7/29/2019
Continues to work well. The faucet has not leaked and we are able to easily remove and clean the aerator when debris was clogging it.