Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Replaces the 7" monitor for your Voyager WiSight 2.0 wireless camera system. Fits system ASA57YR and ASA37YR. Includes suction cup mount and 12V DC plug.
Features:
Specs:
Fits:
Note: Not compatible with first generation WiSight technology products.
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Hi there. I'm Michael with etrailer.com. Today, we're gonna take a quick look at this replacement Voyager WiSight 2.0 wireless RV backup camera monitor. This is going to replace the seven-inch monitor for your Voyager WiSight 2.0 wireless camera system, including the two part numbers that you see on the screen there. So, this is gonna be a great option if your original monitor is no longer working. Keep in mind, this will only work for the 2.0 system.
It's not gonna be compatible with your first generation WiSight technology products. This does include the suction cup mount on the back here, and your 12 volt DC plug that will plug right in to the back and then into your charging port in your RV. The dimensions for this, of course, the screen is your seven inches diagonally as screens are measured. Your width, we're looking at right at about 8 3/4 of an inch wide. Including your antenna, the height, again, including that antenna, looking at approximately 5 1/2 inches.
Kind of hard to show you with the angle of my camera here. 5 1/2 inches tall. And then our width, we're just over one inch. We'll call it about 1 1/4 would be safe. There are a few little knobs back here.
This is gonna give you that same 800 by 480 resolution. It's gonna use the same 12 volt to 24 volt DC power. The back here, you can remove that suction cup by pulling back on that center tab like so. That lifts off the holder there. And you can see we've got the opening there, so that we can mount this onto another application.
They do include four mounting screws for you to get that mounted onto another application if you so choose. So, that's gonna complete our look at this replacement Voyager WiSight 2.0 wireless RV backup camera monitor. Again, I'm Michael with etrailer.com. Thanks for watching.
Customer Satisfaction Score:
88% were satisfied with this product
12% of customers were not satisfied
Ratings & Reviews
A+
love it
On time as always!
Camera arrived with missing part. After two months dealing with E-trailer I contacted the manufacturer they send me the part right away. No charge. Never will i shop at E-trailer again. Worst customer service i ever dealt with.
Katrina D.
1/26/2024
Well, that stinks. They should have sent you a replacement on our behalf, I'm sorry that didn't work out. Lets get a refund in motion for you.
We are very pleased with this product. Thank you for FedExing it to us in such a short amount of time.
Display cuts out or freezes for a few seconds from time to time. Really dangerous if your looking at the monitor to decide whether a lane change is possible. Most of the time its great.
Michael
3/5/2025
Im about to install the third camera. In warm wet conditions the cameras get condensation on the lens, causing blurred and distorted images.
Jameson C.
3/5/2025
I bought this to replace a generation 1 camera and monitor, and am very happy with these new products. Both were easy to install, and am looking forced to taking this on the road soon.
Michael
6/24/2023
This camera is great! Much more clear then the older generation camera. I found that I rely on this much more confidently when I am traveling
Couldn't get it to pair with the BT camera on the trailer.
Lazer S.
5/13/2026
Sorry to hear that. Do you have the newer WiSight 2.0 system installed?
I purchased a truck camper that the previous owner had the camera installed but he kept the monitor for his new RV. Wanting to monitor our Jeep and traffic while towing I wanted to get this setup complete.
I ordered the replacement unit and it arrived right on time as I had hoped. Having no clue as to how to pair the 2 units and not reading any instructions, I powered the unit then followed the prompt on the screen to power the tail light circuit (thus powering the camera). It popped right up and I was in business. It initially came up as reverse image but a few menu clicks later and I had it flipped. Very low tech and easy to start up. The peripheral view looks to be very good as well.
Product arrived quickly. The monitor was easy to setup and worked flawlessly with the voyager 2 camera that came on my 5th wheel.
Great product and fast shipping -Thanks -Tod
My original monitor was stolen!! The entire system is excellent and the replacement was as easy to install as the original: intuitive menus guide you through the setup process, which is very automatic.
Easy to install. Paired with our existing camera right away.
Received it just before our trip. So easy to connect to the camera great views. The only complaint I have is that the stand won't suction to anything. Had to prop it the whole trip which made seeing the screen difficult.
Bought as a backup. My first camera monitor fell off the windshield one too many times and the antenna was wonky. So after getting the 2nd I learned I could replace the antenna. Now I have a backup!
Fired right up and connected to my camera that was on my Lance 850 truck camper when I purchased it. Glad I went with the 7" screen over the 4". Great purchase again with ETrailer.
Nick S.
11/24/2025
That is great to hear, and the picture looks great! I am glad it hooked right up and is working well. What kind of boat is that?
Do you have a question about this Accessories and Part?
Info for this part was:
At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
John
9/1/2023
No issues works great