bing tracking image
  1. RV Camera System
  2. Rear View Safety
  3. Backup Camera
  4. 7 Inch Display
  5. Mirrored Image
  6. Night Vision
  7. Removable Sunshade
Rear View Safety Backup Camera System - 4 Camera Setup - Quad View Monitor
Rear View Safety

Rear View Safety Backup Camera System - 4 Camera Setup - Quad View Monitor

Part Number: RVS-062710
In Stock
$750.47
Retail:$857.99
You Save: $107.52
RV Camera System
zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

In Use/Installed

Need help with installation?
Locate installers near me
Rear View Safety rv camera system for your 2006 Coachmen Concord Motorhome are available from etrailer.com. Installation instructions and reviews for your Coachmen rv camera system. Expert service, and great rv camera system prices. etrailer.com carries a complete line of Rear View Safety products. Order your Rear View Safety Backup Camera System - 4 Camera Setup - Quad View Monitor part number RVS-062710 online at etrailer.com or call 1-800-940-8924 for expert service.
  • All Info
  • Reviews (36)
  • Q & A (0)
  • Videos (4)
  • Photos

Rear View Safety RV Camera System - RVS-062710

  • Backup Camera
  • 7 Inch Display
  • Rear View Safety
  • Mirrored Image
  • Night Vision
  • Removable Sunshade
  • 4 Cameras
  • Hardwired
  • Dashboard Mounting Bracket
  • Suction Cup Mount
  • Below Rear Clearance
  • 130 Degrees


  • Rear View Safety backup camera system
  • 7" Digital TFT LCD color monitor
    • Quad view
    • Removable sunshade
    • Mirror image capability
  • 4 Cameras
    • 2 CCD color backup cameras
      • 130-Degree viewing angle
      • 50' Infrared night vision
    • 2 CCD color side cameras
      • 120-Degree viewing angle
      • 30' Infrared night vision
    • IP69K Rated - keeps out dirt and moisture
    • 20G Vibration and 100G impact rating
  • Includes all wires, connectors, and mounts
  • 1-Year warranty


RVS-062710-10 Backup Camera System | Four Camera Setup with Quad View Monitor

Installation Details RVS-062710 Installation instructions

Video of Rear View Safety Backup Camera System - 4 Camera Setup - Quad View Monitor

Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.




Video Transcript for Review of the Rear View Safety Backup Camera System

Speaker 1: Today, we're gonna take a look at the rear view safety backup camera system with the quad view monitor. Now this backup camera system will come with four cameras, comes with two backup cameras to see behind you, two side view cameras to see what's alongside you. So it'll provide a complete view of any blind spots around your vehicle. The monitor itself will allow why to view each camera separately or all at the same time with multiple options in between. It includes everything laid out here on the table. We'll start with the monitor.

It's a digital 7" LCD quad view color monitor. It does have an adjustable stand with it. It also comes with a nice universal mount and all the installation hardware to install it. It even comes with a remote control. Here's the power connection wire, audio/video cable.Now the two backup cameras, comes with all the mounting brackets you need to install them, comes with the two side cameras with all the mounting hardware to install those and then over here, you have two 66 foot long extension cables for the backup cameras, two 33 foot long extension cables for the side cameras and a nice owner's manual to describe how to put this all together and how to use it.

Now the monitor itself, it's a quad view color monitor. It comes with a nice super sharp digital display, has a pixel resolution of 800 by 480. This monitor will allow connection of up to four cameras, has the ability to view each camera separately or all at the same time. It does also include distance grid lines, built in speakers and then its menu can be navigated with these on dash buttons or from the remote, which is included. The back up cameras, these colored cameras are built with heavy duty zinc metal.

It encases the 2.1 millimeter sharp lens.They do have a viewing angle of 130 degrees and 600 TV lines, so it means you get the best quality image with no blind spots. If you notice, they use 18 infrared lights on here to allow you to see up to 50 feet, even in the darkest night and then they put a foam around the lens. It'll guarantee no glare from the infrareds. These cameras do have an IP69K rating. They ride out any storm and will boast a 20G vibration rating and they do use the aircraft grade cable connector.

Side cameras are very similar. These are also made from a heavy duty zinc metal. They do come with a 2.1 millimeter sharp lens also. Their viewing angle is 120 degrees. They do use nine infrared lights, which allow you to see more than 30 feet in total darkness. They do come with mounting brackets and they also have a double face tape if you want to mount these flush to your vehicle. The side cameras are also completely weatherproof, have an IP69 rating, also shock resistant and a 20G vibration rating and they also use the aircraft grade cable connectors.But that should do it for the review on the rear view safety backup camera system with the quad view monitor.

Customer Satisfaction Score:

Ratings & Reviews

4.6

36 reviews

by:



by:



by:



by:



by:



by:



by:



by:

GREAT JOB



by:



by:



by:

marty is awesome. thanks



by:

Lots of product options excellent website and fast parts delivery.



by:

WHAT A JOY DOING BUSINESS WITH THIS COMPANY, EASY ORDERING, RECEIVED EVERYTHING I ORDERED IN A VERY TIMELY MATTER.



by:

Finally got monitor install hook camera up this a good outfit work good thanks Tom for knowledge and service you provide thanks



by:

Product as advertised. Service excelled fantastic!



by:

Works very well day or night



by:

The camera systems we purchase have been easy to install and use.



by:

Great system, installed this for one of my customers



by:

Quick shipping, easy order process, ordered the same product from another vendor who promised next day delivery and did not hold up to their end. Do not order from Truckid or Carid. Product fits perfectly in Isuzu. Will order again.
Thanks



by:

Haven’t used the camera system yet but it was fast on delivery. The cameras and components look like they are made very well. Customer service dept. works well for the consumer. Thanks and I will give a review when installed.



by:

Product and pricing excellence is what etrailer is all about. They bakc it all up with great customer support. thanks etrailer.



by:

Exactly what I needed for our venerable 2003 Jayco travel trailer. 3D printed a very neat unit that holds the display and fits into a “sunglasses pocket” on the top of the dashboard of our Chevy Colorado pickup.



by:

I have done business with etrailer for over 5 years. In every case I have found their pricing to be fair and their customer service to be excellent.



by:

Recieved my etrailer order yesterday. Received it very quickly, I ordered two items,
a back-up camera system and sensor set-up. Very pleases with what I have seen of it. Will install it this weekend, can't wait.



by:

superior upgrade for us. would have been 5 star but the installation and usage instructions are almost worthless. 8^)


25
36
Show More Reviews

See what our Experts say about this Rear View Safety RV Camera System

  • Troubleshooting An RVS RV Camera That Stopped Working
    The Rear View Safety Backup Camera System # RVS-062710 is a pretty much closed system with each component having a connector to connect to the wiring instead of splicing. Most likely the camera that isn't working has a loose connection so you'd want to start by removing the camera from your motorhome and checking the connector to ensure it's fully secured. From there you would need to trace the wire up to monitor checking every connection point for anything loose. If you find each connection...
    view full answer...
  • Recommended Backup Camera System Upgrade For A 2009 Tiffin Allegro Bus With A TripleVision System
    I took a look at the TripleVision system on your 2009 Tiffin Allegro Bus MH, and the Rear View Safety Backup Monitor # RVS-6137Q that you mentioned, and it will actually not work with your current system, unfortunately. This monitor is only designed to work with RVS branded cameras, and is not compatible with TripleVision branded cameras. However, the best solution as I see it, is to upgrade your current system. A great option that utilizes the # RVS-6137Q monitor that you were looking...
    view full answer...
  • Upgraded Camera Kit Recommendation for 2007 Damon Tuscany with Night Vision
    The Rear View Safety Backup Camera System # RVS-062710 is a really solid option that would give you 4 cameras you could have mounted on your 2007 Damon Tuscany 4072. The monitor is bigger at 7 inches and the cameras have night vision like you are wanting as well so it would be just what you are looking for. I attached a review video for this for you to check out as well.
    view full answer...
  • Can I Integrate A Backup Camera Using A U-Connect Screen And Furrion Back Up Camera On 2021 RAM 1500
    We can definitely get you setup with a backup camera for your trailer. There will be some things we have to work around to get this setup properly. First, the Furrion cameras will only work with Furrion monitors, so you will not be able to use the U-Connect screen with the Furrion camera. The trailer camera pre-wire package will only work with a backup camera on the truck. The Furrion camera dock will house a camera on a separate system keeping an eye on the rear of your travel trailer....
    view full answer...
  • Recommended Backup Camera System for 5th Wheel Trailer Flat Towing Jeep Wrangler
    For your setup, I recommend the Rear View Safety Backup Camera System with Side Cameras # RVS-062710 and Quick Connect Kit # RVS-2133. This will give you two additional cameras to allow you to see the blind spots from your trailer better for turns and lane changes. I've attached videos to assist. If you just want to see the Jeep behind the trailer, then I recommend the Rear View Safety Backup Camera System with Trailer Tow Quick Connect Kit # RVS-770613-213. This will give you the connection...
    view full answer...
    Image 1 for
  • Best Option For Replacing Damaged Monitor On Triple Vision M-70 Camera System
    Hello Ken, thanks for reaching out. I do have a solution for you, but we would not have a replacement monitor that will work with the current camera setup. Our best option for replacing it is to replace the entire camera system. For that I recommend the following: - Rear View Safety Backup Camera System - 4 Camera Setup - Quad View Monitor # RVS-062710 This is a complete camera system. It comes with four cameras with a 120° viewing angle. It has a 7" color monitor. The monitor allows...
    view full answer...
  • How Does Furrion Vision S 3 Camera System Install on 2020 Jayco Redhawk 24B
    The Furrion Vision S Wireless RV Observation Camera System w/ 3 Marker Light Cameras # FR98NR is very popular mainly because it gives you side lights that also act as marker lights so they are a little hidden and the whole system just looks pretty sleek. The exact install can vary but typically you will just replace current lights with these cameras so that you have easy access to wiring connections. Attached is a sample installation that Shane did on a 2009 Forest River Cedar Creek that...
    view full answer...
  • Wiring Diagram for the RVS RV Backup Cameras
    There may be a way to get the Rear View Safety Backup Camera System # RVS-062710 to work if you have enough wire. To wire these cameras properly you're going to need to connect the red to power, the yellow to the left turn signal, the brown to the right turn signal, the blue to the back/rear, and the black to a ground. I'll go ahead and attach a wiring diagram as well for you to check out.
    view full answer...
  • Rearview Safety 4-Camera Systems and Wiring Installation
    We have not had anyone complain about the cameras in system # RVS-062710 becoming foggy and unusable as a result. This particular system comes with quad view monitor and 4 camera inputs. There is only one power wire that will need to be installed for the whole system. The cameras do not require their own power wires. I have included a diagram showing how the 4-camera system wires up. This is compatible with the Quick Connect Trailer Tow Kit # RVS-2133.
    view full answer...
    Image 1 for
  • 4th Camera Option for the Furrion Vision S Wireless RV Camera System
    The Furrion Vision S Wireless RV Observation Camera System, # FR98NR that you linked to comes with 3 LED waterproof cameras with night vision; 1 third brake light camera and 2 side marker light cameras that wire to your turn signals and of course the touch screen monitor which can has availability of a 4th camera. You can add a 4th camera with, # FCN48TASF and have it mounted anywhere. An alternative and my second recommendation, is the Rear View Safety Backup 4 Camera System # RVS-062710...
    view full answer...
  • Back-Up Camera for Outdoors RV 250RDS Travel Trailer
    We have a vastly wide selection of camera systems and I think we can help, even though I'm not seeing any listed with a marriage saving feature. There are three options from Swift Hitch that transmits both video and audio. This audio feature is important in communication when someone outside the tow vehicle is trying to provide verbal instructions to the driver. The Swift Hitch Wi-Fi Camera for Smartphone or Tablet, # SH04, my preferred choice and best price point. But this does not come...
    view full answer...
  • Do Side Cameras Come On with Turn Signals on Rear View Safety Backup Camera System RVS-062710
    Yes, you can install the Rear View Safety Backup Camera System with Side Cameras Item # RVS-062710 to have the side cameras come on when a turn signal is engaged. There are instructions that explain different ways the cameras can be activated and this is one of the methods explained. The method I recommend is having all the cameras on while driving with the quad view monitor so you can see all around as needed.
    view full answer...
  • Backup Camera System Recommendation for 35 Foot Class A Motorhome
    I have the perfect solution for fitting your 35 foot class A motorhome with a backup camera system. The Rear View Safety Backup Camera System with Side Cameras, # RVS-062710, will give you the visibility you need. I personally prefer the wired systems because you don't have to deal with any interference and have a reliable system when you need it. The 2-color CCD side cameras have 120 degree viewing angle and use 9 infrared lights per camera for 30' of infrared night vision . The heavy-duty...
    view full answer...
    Image 1 for Image 2 for Image 3 for
  • Recommended Camera For Viewing Your Vehicle When Flat Towing
    I recommend the Rear View Safety Backup Camera System with 5.6 Inch Monitor, # RVS-7706033. This backup camera system has a 130-degree viewing angle with a 50 foot infrared night vision allowing you to see clearly at all times of day and night. It includes all the wires, connectors, and mounts. The camera has an adjustable sun shade to ensure you don't get a glare and get a clear picture at all times of the day and with all weather. To get a complete view of the road, I'd recommend...
    view full answer...
  • Wiring Diagram for the Rear View Safety Backup Camera # RVS-062710 For Cameras to Monitor
    I attached a diagram that I took from the instructions for the Rear View Safety Backup Camera # RVS-062710 that shows how all of the monitors connect.
    view full answer...
    Image 1 for
  • Adding Cameras to the 2021 Thor Gemini Motorhome
    Yes, we have several options for this. You can either add on to the existing system you have, if that is an option. You will need to identify what system you have on the RV to know what options you have toward add on cameras as varying makes cannot be combined. Or, you can replace the existing system with a more complete option that has all the features you want. Something such as the Rear View Safety Backup Camera System with 4 Cameras and Quad View Monitor, # RVS-062710. I have attached...
    view full answer...
  • Troubleshooting An RVS Camera System With Mixed Up Camera Views
    I spoke with the manufacturer and they stated they have experienced this is the past with another Rear View Safety Backup Camera System # RVS-062710 and that it's a signal issue. To resolve the issue they recommend disconnecting power to all cameras and then to connect and trigger them one at a time to see if they correctly trigger and go back to their correct side.
    view full answer...
  • Recommended Replacement for a Perimeter View Camera System
    I wish we did John but your Perimeter View uses different inputs then the wired systems we have available. The closest thing we have to it is the Rear View Safety Backup Camera System item # RVS-062710. It has 2 color backup cameras with a 130° viewing angle, 2 color side cameras with a 120° viewing angle, a 7" Digital TFT LCD color monitor with quad view, and all the wires, connectors, and mounts for installation.
    view full answer...
  • Wiring Diagram for Rear View Safety Backup Camera System # RVS-062710
    Absolutely! On the diagram that you mentioned, which I have attached for reference, the wire numbers are as follows: 1. Red (power +) 2. Yellow (Left) 3. Brown (Right) 4. Blue (Back/Rear) 5. Black (Ground) I have also attached the complete installation instructions for the Rear View Safety Backup Camera System # RVS-062710 that you can take a look at.
    view full answer...
    Image 1 for
  • How to Wire the Rear View Safety Backup Camera System to Trigger the Side Cameras w/ Turn Signals
    To have the back-up camera on and switch to the side cameras when you use your turn signals using the Rear View Safety Backup Camera System # RVS-062710, you will want to wire the back-up camera to the running lights and then run the side cameras to the turn signals using the trigger wires. This should cause your back-up camera to remain on when the running lights are on and then when the turn signals receive power, the trigger wire will turn that camera on the screen. When the turn signal...
    view full answer...
  • Could Wiring of Weldex RV Backup Camera System be Reused with RVS Backup Camera
    So the Weldex camera setup you have is discontinued and notoriously had bad connections on the wires and in the circuit boards of the cameras and monitors. There might be a way to adapt the wiring you have with a camera we have like the Rear View Safety Backup Camera System # RVS-062710 you referenced but since the wiring of the system you have is not reliable I would strongly recommend just starting over with an all new kit like the one you mentioned.
    view full answer...
  • How to Determine Which Wire Activates Back Up Camera on 2018 Phoenix by Shasta 28.5 RL
    I have an easy way for you to determine which wire has power but we can't tell by just the wire colors. Most likely though the white wire is the ground since that the industry standard for the ground circuit and the green is the activation circuit that provides power for the camera. What you'll want to do is test the green wire with a circuit tester like part # PTW2993 but you'll have to have the tow vehicle attached and you'll want to first try with the running lights on and then when...
    view full answer...
  • Why Would Turning On Headlights Activate Rear Camera and Override Side Blinker Camera on RV
    Your backup camera setup is wired currently to show the rear camera angle whenever the running lights/headlights are turned on. This is a pretty common way to trigger a backup camera. Since this trigger overrides the turn signal triggers the easiest solution will be to switch the rear view camera to a reverse light circuit instead. This will prevent the rear camera from showing when you turn the headlights on. You might go through the manual of your camera setup to see if there is a way...
    view full answer...
  • Is Drilling Required to Install Rear View Safety Backup Camera System w/Side Cameras
    The Rear View Safety Backup Camera System with Side Cameras # RVS-062710 comes with hardware to attach the cameras to the outside of the trailer. This would require drilling into the outer body of your Airstream. If you go with this system along with the quick tow # RVS-2133, I recommend putting a dab of silicone sealant # LT37464 at the holes so no water can get in. You would also presumably have to drill holes to run the wiring. The side cameras do have gaskets so you would not have to...
    view full answer...


< Previous



Do you have a question about this RV Camera System?


Info for this part was:

Employee Mike L
Expert Research:
Mike L
Employee Jameson C
Expert Research:
Jameson C
Employee Tyler C
Edited by:
Tyler C
Employee Jeff D
Installed by:
Jeff D
Employee David F
Installed by:
David F
Employee Joshua S
Video by:
Joshua S
Employee Dustin K
Video by:
Dustin K
Employee Thomas T
Video by:
Thomas T
Employee Jacob T
Video Edited:
Jacob T
Employee Jonathan Y
Video Edited:
Jonathan Y
Employee Mary K
Updated by:
Mary K
Employee Wilson B
Updated by:
Wilson B
Employee Noah M
Updated by:
Noah M
Employee Daron K
Written by:
Daron K
Employee Ryan G
Test Fit:
Ryan G
Employee Kevin C
Test Fit:
Kevin C

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.


Product Experts Available Now!
Call 1-800-940-8924
<