bing tracking image
  1. Roof Rack
  2. Rhino Rack
  3. Black
  4. Platform Rack
  5. 59L x 49W Inch
THIS ITEM IS NOT A FIT FOR
2016 Jeep Compass
etrailer Installation
We'll connect you with nearby partnered installers who know this exact setup.
Rhino Rack

Rhino-Rack Pioneer Platform Rack for Raised Side Rails - 59" Long x 49" Wide

Part Number: RR87CP
In Stock
$1,359.98
Roof Rack
Not Confirmed to Fit

2016 Jeep Compass

Will this fit?

To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.

zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.
By submitting this form, you understand and agree to our Terms of Sale, Website Terms of Use and Privacy Policy.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

In Use/Installed

etrailer Installation
We'll connect you with nearby partnered installers who know this exact setup.
Built for off-road use, this platform rack's large, flat surface accommodates loads of all shapes and sizes. Roof rack legs install to the raised factory side rails on your vehicle's roof. Compatible with many Rhino-Rack accessories. Great Prices for the best roof rack from Rhino Rack. Rhino-Rack Pioneer Platform Rack for Raised Side Rails - 59" Long x 49" Wide part number RR87CP can be ordered online at etrailer.com or call 1-800-940-8924 for expert service.
  • All Info
  • Reviews (16)
  • Q & A (0)
  • Photos

Rhino Rack Roof Rack - RR87CP

Highlights

  • Custom Fit for Your Vehicle: Installs on your roof with a kit designed for your vehicle.
  • Large, Flat Cargo Space: 59" long x 49" wide platform carries gear of all shapes and sizes.
  • Low-Profile for Less Drag: Aerodynamic build with wind fairing helps cut wind noise and resistance.
  • Built for Tough Trips: Aluminum frame with reinforced nylon connectors resists wear and off-road use.
  • Ready for Adventure Gear: Works with awnings, light brackets, shovel holders, tire carriers, and more.
  • Simple Setup and Upkeep: RX legs clamp to raised side rails; torque tool set included for easy install.

Features to know about

Load More Without Worry: Large, Flat Platform for All Kinds of Gear

When you need extra space for your outdoor adventures, the Rhino-Rack Pioneer Platform Rack gives you a big, flat surface to work with. At 59" long x 49" wide x 1-3/4" tall, it can handle gear that doesn’t fit well on traditional crossbars. The open platform design makes it easy to strap down kayaks, camping gear, or odd-shaped cargo so you can load up and hit the road with confidence.

Keep It Simple: Direct Mount to Raised Side Rails

Instead of juggling separate crossbars or extra adapters, this system clamps straight onto the raised factory side rails using the included RX legs. That means fewer parts to deal with and a cleaner, lower-profile setup on top of your vehicle. The complete system includes one platform and four legs, giving you everything needed for a solid connection right out of the box.

Stay Steady and Quiet: Low-Profile, Aerodynamic Design

You don’t have to put up with loud wind noise just because you’re carrying gear on the roof. The Pioneer Platform’s low-profile frame and detachable wind fairing help cut down on drag and noise while you drive. It stays quiet and stable even at highway speeds, so you can focus on the trip instead of fighting wind roar.

Bring Any Accessory You Want: Built-In Channels for Mounting Options

The integrated channels in the planks and frame make this platform ready for all kinds of gear. You can add awnings, light brackets, shovel holders, spare tire carriers, and more using compatible Rhino-Rack accessories (sold separately). If you want to mount kayak carriers or cargo boxes, accessory bars (RR33AP — sold separately) let you do that too. It’s a single rack that adapts to whatever adventure you have planned.

Built Tough for Real Adventure: Durable Aluminum Construction

Designed for off-road use and tested for Australian conditions, this rack is made from powder-coated aluminum with reinforced nylon connectors. It’s rugged enough to take on rough trails but still resists scuffs and corrosion over time. The included torque tool set makes setup easy and maintenance simple, so your rack stays in top shape season after season.

Specs

Dimensions

  • Dimensions: 59" long x 49" wide x 1-3/4" tall

Warranty

  • Warranty: 5-Year limited warranty

62100F Rhino Rack Pioneer 6 Platform Roof Tray - Aluminum - 59" Long x 49" Wide

RX100 Rhino Rack RX Leg for Vortex Crossbars and Pioneer Platforms - Raised Factory Side Rails - Qty 4

Installation Details RR87CP Installation instructionsAlternate Instructions RR87CP Installation instructions

This Product Fits The Following Vehicles




Ratings & Reviews

4.3

16 reviews
Review sort icon
Built for off-road use, this platform rack's large, flat surface accommodates loads of all shapes and sizes. Roof rack legs install to the raised factory side rails on your vehicle's roof. Compatible with many Rhino-Rack accessories.

by:



by:



by:



by:



by:

Kinda expensive for what you get.



by:

Very easy to assemble and install on existing roof rails.



by:

Great product. Real satisfied with my purchase. Fast shipping and excellent customer service.



by:

Product is solid, the instructions are pretty hard to figure out and Rhino Rack does not offer clear instructions for this specific model on their webpage. Over all etrailer was great to work with the only reason I wouldn’t give 5 stars is lack of clear instructions by platform model.



by:

Looks great especially with the full rails. However there are 2 little things that it was lacking; when you try to log into site to find measurements for the cross bars it is a pain and took longer than the build to find. I would recommend etrailer include the fitting specs with package or at least email a pdf of it. 2nd item- the package came with hole plugs but no instructions what or how they fit into this. I later found out as I installed this that I had to drill 4 holes to accommodate the tool to tighten the sx legs. Over all great product



by:

This Rack fits perfectly on my 2022 Altas; I didn't have to change the rails or add anything extra.
Drove it back and forth from North to South CA with no issues, you will notice some extra noise and some drag even if you are traveling with no luggage, but that's expected.
Overall I'm very pleased with this rack; solid and sturdy and with a very rugged look. Given the weight, it might need some effort to take it off, but nothing too complicated; even one person could do it carefully.



by:

The roof rack is great and very useful. The assembly is simple but it was difficult to figure out because the instructions were useless. Mounting on my vehicle was difficult. It was a situation of needing to tighten it once it was in place but not having enough access to the face of the bolt to get a tool on it. Now that it’s up, it’s looking good and because it’s not that easy to fasten it back on, it’s going to stay up there.



by:

The instructions on etrailer were way better than the ones that came from rhino. The rack is awesome seems to be well built I would highly recommend it to anybody looking at doing any over-landing or tent roof camping



by:

Very nice rack. It holds well and not too noisy when on the highway. I did drill a couple holes in the rack to hold my roof top tent down. Also like how many accessories are available for the Pioneer Platform Rack.



by:

Loving my new Ford Bronco Sport Badlands model and the Pioneer Platform rack! With the Bronco Sport being so new, locating quality accessories was a bit of a challenge. I was excited to see Rhino Rack had the Pioneer Platform rack system I was looking for to start my build! Vicki at etrailer was super helpful in finding the parts, as listed on the Rhino Rack website, to make up the system. The etrailer site had not been updated to include the compatibility with the Pioneer System yet for the Bronco Sport. The parts were actually in stock and ready to ship! I’m giving the Rhino Rack Pioneer Platform 5 stars for ease of assembly and product quality. Assembly and install took about 3 hours, with several fore/aft adjustment to allow for complete operation and clearance for the Bronco Sports moonroof. This rack is the foundation for the complete “overland” conversion to come!



by:



by:

Does not fit the Bronco Sport with a moonroof. Followed their terrible instructions to a T and spoke to Rhino Rack Customer support 3 seperate times before getting accurate underbar measurements that they fail to list on their website. One guy said "raise the factory siderails." Lmao

Nick S. profile picture

Nick S.

12/15/2025

I am sorry to hear about your experience with this rack not fitting with your moonroof, and not being able to get a clear answer. We will reach out shortly and help resolve this for you.


16
16

See what our Experts say about this Rhino Rack Roof Rack

  • Can Inno Roof Deck Platform Rack Fit Raised Side Rails on 2024 Ford Bronco Sport
    Hi Dale; sorry for the delay on this, the Inno Roof Deck Platform Rack # INA510 is only designed to fit crossbars. There is no way to adapt it to the raised side rails on your 2024 Ford Bronco Sport. If you have a factory roof rack this will fit as long as the crossbars are no more than 3-1/2" wide x 1-3/8" tall. Since you wanted something that sits lower and not up on the crossbars I would check out the Rhino-Rack Pioneer Platform Rack # RR87CP. This has feet that are designed to clamp...
    view full answer...
  • What Roof Basket Will Fit Directly to 2022 Nissan Pathfinder OEM Roof Rails
    Hey Shawn, thanks for reaching out! We have the perfect solution for you with the Rhino-Rack Pioneer Platform Rack # RR87CP. This comes with legs that mount directly to the factory raised rails on your 2022 Nissan Pathfinder so we're cutting out the "middleman" (the crossbar) for a lower profile. What are you planning on using the basket/platform for? There are a handful of accessories that can be used with this platform so if you let me know I can see if there is anything else you're needing.
    view full answer...
  • Are Crossbars Needed for a 2024 Suabru Forrester Wilderness
    The Rhino Rack Pioneer # RR87CP does have integrated t-slots so you potentially wouldn't need crossbars if whatever you're attaching can be attached via t-slots.
    view full answer...
  • Dimensions of Rhino-Rack Pioneer Platform Rack 62100F
    Hello Karlo; thanks for catching that for us. The Rhino-Rack Pioneer Platform Rack # RR87CP is 59" Long x 49" Wide. I'm not sure what happened when that title was written or when the dimensions were added to the specs but 59" x 49" is correct. I can confirm that this is also the correct size for your 2023 Subaru Forester.
    view full answer...
  • Which Legs Are Needed to Mount Pioneer Platform on 2016 Jeep Cherokee
    Hi Nathan; the RLT600 legs won't work on your 2016 Jeep Cherokee. To mount the Pioneer Platform you need the Rhino-Rack RX100 Legs # RR97AP. These are included with the Rhino-Rack Pioneer Platform Rack # RR87CP.
    view full answer...
  • Recommended Platform Rack for a 2024 Subaru Forester Wilderness w/ Factory Roof Rails
    We sure do Drew. To attach a platform rack directly to your 2024 Subaru Forester Wilderness's factory rails, you'll want the Rhino-Rack Pioneer Platform item # RR87CP. This 59" long x 49" wide platform comes with mounting clamps that will attach to your Subaru's roof rails without having to install crossbars. I attached a few pictures below along with an installation video we made showing this setup on a 2019 Forester. It's the closest option I could find. What kind of gear do you plan...
    view full answer...
  • Recommended Platform Rack for a 2024 Subaru Outback w/ Raised Roof Rails
    Unfortunately, it will not Mike. To attach a Pioneer Platform to your 2024 Subaru Outback, you'll need the Rhino-Rack Pioneer Platform Rack for Raised Side Rails item # RR87CP. This kit comes with four locking clamps that attach directly to the raised rails on your Subaru's roof. These clamps will provide the base to secure the 59" long x 49" wide Pioneer Platform. I attached some of pictures below so you can see what the Pioneer Platform item # RR87CP looks like when attached to Subaru's...
    view full answer...
  • What is the Weight Capacity of the Pioneer Platform When Installed on a 2019 Subaru Forester?
    Hey Jake! Your 2019 Subaru Forester's roof has a 125 lbs capacity with the Rhino-Rack Pioneer Platform Rack for Raised Side Rails item # RR87CP installed. Your raised roof rails have a 175 lbs capacity but that gets reduced to 125 lbs when you add in the 50 lbs weight of the Pioneer Platform. The Pioneer Platform Rack item # RR87CP comes with everything you'll need to get it attached to your Forester's raised rails. I linked an installation video below so you can see how to get it setup....
    view full answer...


Info for this part was:

Employee Joshua S
Video Edited:
Joshua S
Employee Dustin K
Video Edited:
Dustin K
Employee John S
Video Edited:
John S
Employee Wilson B
Updated by:
Wilson B
Employee Daron K
Updated by:
Daron K
Employee Michael B
Updated by:
Michael B
Employee Lincoln B
Updated by:
Lincoln B
Employee Alex H
Written by:
Alex H
Employee Evangeline M
Test Fit:
Evangeline M
Employee Evan R
Video by:
Evan R

At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time.