To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
This custom fit kit lets you mount 4 Rhino-Rack 2500 legs to your vehicle with a naked roof. Clamps mount to legs with bolts. Includes 4 clamps and 4 pads.
Features:
Specs:
Ratings & Reviews
Rhino rack 2500 with euro bars. Aero crossbars not needed because rack is easily removable when not in use.
13 ft 85 lb fishing kayak 2010 Toyota Matrix. Car has slanting roof and variable thickness roofline. See photo. OEM rack position would make front of kayak point up in the air causing dangerous lift.
Rhino rack provides different length clamps for the slanting/tapering thickness roofline - rack is positioned for level load.
Etrailer excellent website with detailed photos allows easy comparison. Prices and selections better than manufacturer's and other websites.
Customer service is also excellent, they promptly responded to calls/emails even on weekends and made extra effort to get out-of-stock items delivered much faster than expected.
We had the challenge of how to carry 2 kayaks this summer in addition to hauling a 30 foot gooseneck horse trailer. We have F450 crew cab with custom truck bed. We hoped to use the "head ache" bar on the truck bed to support the rear sets of Swagman Rincon supports and purchased a single Rhino Vortex bar for the forward sets on top of the cab. We have 10.5 and 12 foot kayaks and this looks to be an excellent solution. The kayaks are clear of the gooseneck trailer even in a "jackknife" position. Please note the truck bed is extra long therefore there is plenty of room forward the nose of the trailer. We have not hauled yet but will convey any issues if there are any. eTrailer tech support was excellent. Product shipped as projected. Installation took approximatly 3 hours.
I bought the roof rack to carry kayaks back and forth from Pennsylvania to Florida. The rack is solid and performs that task very well. My plan was to take the rack off and on but I decided to just leave it on. I do notice some wind noise since I've added the rack but it does not distract me and I would say that it is not excessive but it is noticeable.
I did have problems during the installation. I mounted the racks on a Ford 250 super duty. And the instructions were very clear as to where the feet that's support the rack where to be installed. Plastic strips are cut and the feet that support the rack on the roof push up to the cut plastic strips and that is what determines placement. I read the instructions several times and had seen an installation on another truck owned by a friend of mine. When I pushed the feet to the proper position I could not attached the clamps from the rack feet to the rain gutter on the truck which holds the whole assembly on the roof. They were too short. I spoke to Etrailer and a consensus was that I had cut the strips correctly. Etrailer's input of course was over the phone and they could not actually see or measure anything that I did. Nevertheless, in order to install the rack I had to move the feet on each side a bit closer to the rain gutter on the truck. I did not think that this would make any difference and based on the performance I have not noticed any problems. I would have given this product and excellent rating if I did not have to deal with the little problem that I had with the fit. As I said I have not taken it off the roof and I reach up and check it now and then and it's as solid as the day I put it on.
This review covers the Rhino Rack 2500 Vortex Aero crossbars and associated parts (DK284, RRRLKVA, RRVA137S-2) for a naked roof installation on a 2018 Honda CR-V.
Very solid racks. We just took our first trip using them and the didn't budge. As recommended, a few days after installing, I tightened the bolts a bit. I'm not sure they needed it--just a little insurance.
The installation process was clear, but fairly detailed. It would be easy to miss a step, so take your time. Also, I tried a couple shortcuts in the order when installing on the car, but had to back track. So, go in the order they give you.
The racks easily supported our filled "pod" and a couple surfboards, strapped side-by-side. Sorry, no photos of the rack loaded. One thing to watch out for is that our old Thule pod almost didn't fit because of the thickness of the racks. I had to loosen the bolts almost entirely.
Of note: I feel that although I followed the measurements to the millimeter, the fit on our 2018 Honda CR-V wasn't exact. Where the pads sit on the roof of the car didn't align perfectly. I could have adjusted this by just re-trimming the rubber pads that go in the channels, but it's not a big deal, so I just left it.
Finally, I do have one concern. The angle of final installation doesn't really protect the racks from theft very well. The plastic plate that locks over the screw would allow someone with the proper tool to get up under it and loosen the bolts. That being said, someone so inclined could also just break the little plastic door or drill a hole in it to access the bolt. So, I guess it's just a deterrent anyway.
Overall, I'm very happy with the racks and etrailer.com! Despite shipping delays due to Covid-19, they were able to get the racks to me in time for an upcoming trip. I did choose to expedite shipping, but the cost was very reasonable.
The Rhino Rack products are top notch and more reasonably priced that "T" or "Y" brands. (I think some accessories may be interchangeable.) I've had both "T" and "Y" racks but I'm now totally sold on the Rhino brand.
Photo attached of four Rhino,Aero bars, towers and ARB awning mounted on my '18 Colorado and Alu-Cab canopy.
My ARB awning fits fine. And the crossbars come in real handy for our canoes and some pairs panel fencing we transported last summer.
As for the staff at etrailer? Well, I'd say they take fantastic care of their customers. Knowledgeable, helpful and they followup, as well.
Etrailer also has amazing HELP videos as well. I bent the crank handle on my trailer tongue jack, which messed up the "internals". I thought Ikd be shelling out for a new Jack, for sure.
Nope. etrailer had a repair kit available (apparently, I'm not the only destroyer of tongue jacks) at a very affordable price and they have an online video to instruct one in the replacement of the innards.
I don't bother with the other accessory or parts sources anymore. I just call these guys and ask what they have. Never have been disappointed, and they enjoy helping.
This kit has been perfect for my new truck and allowed me to use my bars from my other truck on the new one. This kit is actually more succeed than the ones that I replaced. I use the rhino rack to carry the kayak shown in the picture
This kit I ordered worked very well when I mounted my Rhino Roof Rack to my truck. It's as close as a perfect fit as you can get! I feel it's secure enough that it will go no where and my rods are safe and secure in my truck!
I couldn't find a rack to fit my car anywhere, I have been looking for years and just found Rhino rack on the Internet a few weeks ago.
The Rhino rack for my Toyota Camry is perfect! Easy to assemble, good quality parts, fits really well. Can't wait to get my canoe out on a lake thanks finally to this rack!!
Great fit kit for our 2013 Prius C. It took us several hours to figure out how to install because apparently we both didn’t read the instructions as good as we thought. My recommendation is READ the instructions first, don’t try to figure it out like we did. Once we thoroughly read the instructions the installation had no issues. We did watch a YouTube video so when we finally found the measurements we were only off an inch. We are happy to be able to have more room on our cross country road this July. The racks are quality and the fit kit easy. The cost is a little high for what you get but that’s on rhino rack not etrailer. We are very happy with our purchase. I will adjust my review later on if anything changes.
Hi George from etrailer,
The rack is awesome! Strong, firm hold and nice looking. When doing surveys, I put my ladders on the rack.
I highly recommend this etrailer.
I'm very happy that Rhino Rack builds roof racks to accommodate a large variety of vehicles. Trying to fit a rack to my 22-year-old Chevy pickup with a naked roof was a challenge. Fortunately, the people at etrailer are extremely knowledgeable and were able to get a direct fit. The rack fits awesome and will help in an upcoming road trip. Thanks Alex and etrailer team.
Fits well. Using RhinoRack system for ladders. Residential Light Construction. I made my own air deflector.lol
straight forward and easy
no regrets, great after 1 year
Excellent quality. Easy to install. No issues.
great help from Steve enabling me to get the right parts . and delivered in 3 days. I will use etrailer again
Awesome fit and product for my Honda Ri dgeline!
Worked well. Some time to install but worked well for my lightweight canoe.
Love my roof rack , friends with the same model vehicle bought one from manufacturer and were more impressed with my Rhino Rack and it was a fraction of the price.
Great for what I wanted it for! Nice look and fit for Honda Ridgeline.
Info for this part was:
At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.