
To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
This custom fit kit lets you mount 4 Rhino-Rack 2500 legs to your vehicle with a naked roof. Clamps mount to legs with bolts. Includes 4 clamps and 4 pads.
Features:
Specs:
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Hey everyone, Charles here at etrailer, and today we're taking a look at the Rhino-Rack Vortex Aero Crossbars with the 2500 Series Towers and a Custom Fit Kit on our 2020 Chevrolet Equinox. This roof rack is a great solution since we don't have a hitch or any raised rails to transport our extra gear, freeing up space in our vehicle. Rhino-Rack designed these bars to be aerodynamic, and that is partially due to its shape as well as the vortex strips here. They have the rubberized grooves here that allow for reduced wind drag and wind noise as well. They can carry up to 165 pounds, so just check with your vehicle's specification to make sure you can carry the extra weight. The 2500 Series Towers all come with a lock and core that are all gonna be keyed alike as well as a separate key for your endcaps as well.
The bars are made out of an aluminum, so it's gonna keep it very durable as well as weather resistant, so you can keep it on all year round. So we already installed the front rack, we're gonna do the rear together. So the first thing we wanna do is lay out everything, making sure we have all the parts, and most important thing is the fit kit, they are numbered, so they will depend on whether it goes on the front, the rear, passenger, or the driver's side, but they have arrows on both sides, so we wanna make sure that they are both facing the right direction when we snap these together. And then from there, we're just gonna clamp on the tower here, and we want the arrow facing out, so we're gonna loosen this part if it's too tight on here just so that we can slide it into the T-track system, and just make sure that you're referring to the instructions on how far you need to measure, for us, it's about 15.7 centimeters. And when we set these down, we're just gonna get our measurement from the front rack, measuring center to center, for our Equinox here, it's about 27 1/2 inches.
So after we got the A and B measurements, we just went on both sides making sure that the overhang is equal on both sides. Once that's done, we are good to install the clamps just by fitting that in there like so, and then threading the bolt into the nut here in the back, then I'm just gonna hand tighten it on both sides and then go back and forth just to tighten them equally. So using the included tool, I know that I am completely torqued down when this part of the handle becomes flat just like that. Once everything is tightened down, we are okay to place our endcaps on. And they are all keyed alike, tower to tower and endcap to endcap.
You can always purchase metal locking cores for both the endcap and the towers if you just want that extra piece of mind of having that added security, but that does it for the installation. And that does it for our look on the Rhino-Rack Vortex Aero Crossbars with the 2500 Series Towers and the Custom Fit Kit on our 2020 Chevrolet Equinox..
Ratings & Reviews

James
5/6/2020
After one year I am very confident of my Rhino Rack. Good solid attachment for my tandem recumbent bike.

Jenny N.
5/12/2023
For the 2018 Chevy Equinox with a naked roof the front clamp is placed 7.87 inches forward from the where the front door shuts while the rear clamp would be 27.56 inches from the center of the front clamp back. Can you tell me where you placed yours? Would you be able to send a picture?

Joseph
5/15/2023
Yes, thats where I placed them... That was not the problem. The problem is the left-right dimensions for locating the legs on the crossbars. If I go by the printed instructions, my legs are 4 to 5 inches too wide to fit on the roof, that is to say if the right leg is in location on the roof, the left leg will not touch the roof. I had to re-cut the measurement strips and move the legs closer to each other while keeping the crossbar centered... Not easy without the proper measurements. My recommendation is to review the printed specs for 2018 Chevy Equinox and correct them.

Jenny N.
7/18/2022
You mentioned that the roof rack whistles and I wanted to suggest considering a fairing like part # RRRF2. It would help to stream line the air up and over the roof rack.

Bill
3/29/2022
After a year the entire rack system and kayak carriers are working great. In all fairness i did remove them for the cold winter months, no reason to beat them up when the water is too coldfrozen to be on.
Do you have a question about this Accessories and Part?
Info for this part was:
At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.













Tyson
9/9/2025
Very well! I take this rack on and off as we travel, and it’s very quick, both on and off. Quality has held up as well. Very pleased.