See what our Experts say about this Inno Roof Rack

• Recommended Roof Rack System for a Yakima SkyRise HD Tent on my 2016 Lexus GX 460
  I recommend using a rack system like the Inno system which consist the Inno Aero Crossbars part # INXB93-100, the Inno Flush Feet for Aero Crossbars part # INXS300 and the Custom Fit Kit for Inno Roof Rack Feet part # INTR152. The reason we can use tents like the Yakima SkyRise HD Tent for Roof Rack Crossbars part # Y07436 is because the weight ratings are for a moving load when the vehicle is parked they rate the rack a bit higher allowing us to get up to the capacity of the tent. The...
  view full answer...
• Recommended Roof Rack for 2016 Lexus NX 200T with Flush Mounted Rails
  We do offer a wide array of roof racks that are confirmed to fit the 2016 Lexus 200T vehicles. The only model I could find that has the flush mounted rails like you mentioned in your question is the NX 200T. If this is your model Lexus, the most cost-efficient crossbars and fit kit we currently have available is the Inno Aero Bar Roof Rack, which consists of parts # INXB93-100 for the two aero crossbars (front crossbar is 36 inches and rear cross bar is 39 inches), # INXS400 for the Flush...
  view full answer...
• What Flush Crossbar System do You Recommend for My 2022 Mercedes GLC SUV with Flush Rails?
  From my available specs on your 2022 Mercedes GLC SUV, you have flush mounted factory rails on your roof. For a great flush roof rack system of crossbars that don't extend past the roof rails, there is one that fits your vehicle style. For that route, I recommend the following setup: - Inno Aero Crossbars - Aluminum - Black - 36" Long and 39" Long # INXB93-100 - Inno Flush Feet for Aero Crossbars - Flush Side Rails # INXS400 - Custom Fit Kit for Inno XS300, XS350, XS400, XS450, INTR,...
  view full answer...
• Will Inno Square Bar Roof Rack Fit A 2018 Mercedes GLA45 AMG
  Yes, the Inno Square Crossbar Kit including parts # INB117, # INXP, and # INTR162 are a confirmed fit for your 2018 Mercedes GLA45 AMG. We can't recommend using duct tape between the mounting feet and your factory rails. The rack was designed to fit to the factory flush mounted rails so an additional material between the two could affect it's hold and reliability. These feet are designed to fit without scratch or damage so you can feel good about this solution. I have also included...
  view full answer...
• Roof Rack and Cargo Basket for 2016 Lexus GX 460 to Carry Cargo Bag
  Your best solution is going to be to install a roof rack on your 2016 Lexus GX 460 like the Inno part numbers # INXB93-100, # INXS300, and # INTR152 so that you can then mount a basket to the bars like the Thule Canyon XT # TH859XT and easily carry your cargo bag.
  view full answer...
• Looking For Replacement Base Pads For The Inno Flush Feet INXS300
  Hello Christoph, thanks for reaching out. It sounds like you are looking to replace the base pads from the Inno Flush Feet # INXS300. I am sorry to say that we do not offer this part separately. You may want to try reaching out directly to Inno to see if they can provide one, otherwise the only solution I can offer you is to get a whole new set of feet since they come with the base pads.
  view full answer...
• How to Carry 2 Kayaks and a Canoe With 2000 Chevy Suburban
  To carry a pair of kayaks and that large of a canoe with your 2000 Chevy Suburban you are going to need a roof rack and trailer. The roof rack that will work for your vehicle depends on if it has the factory installed raised rails that run front to back or the factory installed tracks, and please be sure to look in your owner's manual to determine if your roof can handle the weight capacity of your canoe. If your Suburban has the raised side rails and is NOT the Z71 model, the roof rack...
  view full answer...
• Recommended Roof Rack System for a Yakima SkyRise HD Tent on my 2016 Lexus GX 460
  I recommend using a rack system like the Inno system which consist the Inno Aero Crossbars part # INXB93-100, the Inno Flush Feet for Aero Crossbars part # INXS300 and the Custom Fit Kit for Inno Roof Rack Feet part # INTR152. The reason we can use tents like the Yakima SkyRise HD Tent for Roof Rack Crossbars part # Y07436 is because the weight ratings are for a moving load when the vehicle is parked they rate the rack a bit higher allowing us to get up to the capacity of the tent. The...
  view full answer...
• What Roof Rack Should I Buy for My 2021 Toyota RAV 4 with Flush Factory Rails?
  For a great economical Inno rack that is compatible with your 2021 Toyota RAV4, has an aerodynamic design that lessens wind noise, includes an easy installation, and has locks, I recommend the following parts: - Inno Aero Crossbars - Aluminum - Black - 39" Long and 42" Long - Qty 2 # INXB100-108 - Inno Flush Feet for Aero Crossbars - Fixed Mounting Points - Qty 4 # INXS300 - Custom Fit Kit for Inno XS300, XS350, XS400, XS450, INTR, and INXR Roof Rack Feet # IN33FR I went ahead and attached...
  view full answer...
• Low Profile Roof Rack For 2004 Yukon Denali
  The Carr Low-Profile Light Mounting Bar # CARR210501 will not fit. But I have something that will! If you have factory installed raised rails on your 2004 Yukon Denali the lowest profile crossbars would be the Yakima FlushBar Crossbars # Y00444-2 and you'll need this custom fit kit # Y00158. If you don't have raised rails the lowest profile option would be the Inno Aero Crossbars # INXB115-2 with the flush feet # INXS300 and the custom fit kit # INTR501. We don't have a roof rack that...
  view full answer...
• Roof Rack Recommendation for 2014 Subaru Impreza with Naked Roof
  For your 2014 Subaru Impreza wagon there are no roof rack options that will attach with a factory fixed point style attachment as that's not a current option for your vehicle. My solution for you will work as long as you do not have the WRX model. Since your vehicle has a naked roof, you'd need to use a roof rack that uses clamps to attach to the door frame. For that you'd want the INNO part # INXB100-108, # INXS300, and # INTR145.
  view full answer...
• 2014 Subaru Forester Roof Rack Recommendation
  To complete a roof rack on your 2014 Subaru Forester all you would need are the components that you referenced: Inno Aero Crossbars # INXB100-2 Inno Stays for Multi Systems # INXS300 Inno Fit Kit Hooks # INTR145
  view full answer...
• Aluminum Roof Rack for Carrying Surfboards on 2018 Subaru Forester
  We can offer you aluminum bar aero roof racks for your 2018 Subaru Forester for both of its possible roof setups, either raised side rails or a bare roof without fixtures. All appear on the linked page where you can click on the roof type you have to then see only the options that work with that specific roof configuration. Do please note that while the crossbars are all-aluminum there are still some steel components in the foot assemblies because that stronger material is essential in...
  view full answer...
• Roof Rack and Cargo Basket for 2016 Lexus GX 460 to Carry Cargo Bag
  Your best solution is going to be to install a roof rack on your 2016 Lexus GX 460 like the Inno part numbers # INXB93-100, # INXS300, and # INTR152 so that you can then mount a basket to the bars like the Thule Canyon XT # TH859XT and easily carry your cargo bag.
  view full answer...
• Recommended Inno Roof Rack on a 2017 Subaru Forester w/o Factory Side Rails
  For your 2017 Subaru Forester without the factory side rails, I recommend the Inno Aero Crossbars # INXB100-2, the Inno Flush Feet # INXS300, and the Custom Fit Kit # INTR145. This roof rack has a low-profile design and along with the elliptical crossbar design makes the Inno rack aerodynamic. The aerodynamic design will cut down on wind drag and noise will the vehicle is in transit.
  view full answer...
• Solution for Carrying 2 Kayaks on 2018 Mazda CX-5 With Factory Roof Rack
  You can use a carrier with load assist like the Malone SeaWing Kayak Carrier # MPG113MD or the Malone DownLoader Kayak Carrier # MPG114MD-351XL with your factory crossbars that do not extend beyond the feet. The problem you have is the lack of space to use two. The best solution for carrying two kayaks on your 2018 Mazda CX-5 would be to use the Thule Compass Kayak and SUP Carrier w/ Tie-Downs # TH890000. Although it does not have load assist, it will fit on your existing crossbars and...
  view full answer...
  
• 2019 Mazda CX-5 Roof Rack Recommendation for Roof Cargo Box
  I recommend installing the Inno Aero roof rack system on your 2019 Mazda CX-5 flush rail roof so you can transport a cargo box: 45" and 48" Inno Aero Crossbars - # INXB115-123 Through Feet - # INXS350 Fit Kit - # IN53FR I really like this system because it is cost-effective and looks sleek, plus you won't be sacrificing quality as this rack comes with a nice aero-dynamic design and actually includes locks for the feet. The Malone Cargo12 # MPG901 is a solid choice for a roof cargo box...
  view full answer...
• Thule Square Bar Roof Rack for 2022 Mazda CX-5 with Flush Rails
  The Inno square bar roof rack that fits your 2022 Mazda CX-5 with flush rails is the part numbers # INB117, # INXP, # IN53FR. This will work perfectly with your older Hullavator. The Evo flush rails are not what you are looking for. The Inno square bar are exact same dimensions as Thule bars.
  view full answer...
• Inno Feet for Mazda CX-5 With Factory Flush Roof Rails
  If you are wanting to go with a Inno roof rack and you have factory rails on your 2020 Mazda CX-5, you have two options. If you want the aero style crossbars grab these bars # INXB115-123 the Inno Through Feet # INXS350 and the custom fit kit # IN53FR. If you have the square bars # INB117 you will need these feet # INXP and this fit kit # IN53FR
  view full answer...
• Recommended Inno Roof Rack Feet For A 2020 Mazda CX-5 With Flush Mounted Rails
  Since your 2020 Mazda CX-5 has flush mounted rails the Inno Feet for Square Crossbars # INFR you referenced wouldn't be able to slip under the rails for mounting. Instead, I recommend the Inno Through Feet for Aero Crossbars - Fixed Mounting Points - Qty 4 # INXS350 and Custom Fit Kit for Inno Roof Rack Feet # IN53FR. These two components will allow you to install some Inno Aero Crossbars # INXB115-123 so that you can complete your roof rack. I've attached a short video below where Adam...
  view full answer...
• Inno Square Bar Roof Rack that Fits 2023 Mazda CX-5 with Flush Bars
  Inno has a square bar roof rack that fits your 2023 Mazda CX-5 with the part numbers # INB117, # INXP, # IN53FR. Since you already have the Inno square bars you may be able to get by with just the part # INXP, and # IN53FR.
  view full answer...
• Do the Malone AirFlow2 # MPG215 Fit My 2021 Mazda CX-5 with Flush Rails?
  I have a great solution for your 2021 Mazda CX-5 with flush rails. However, the Malone AirFlow2 - 50" # MPG215 definitively does not fit your vehicle. This is because the AirFlow2 model is designed to fit raised factory rails. With that being said, we do have an aero crossbar system that does fit. For that route, I recommend the following parts: - Inno Aero Crossbars - Aluminum - Black - 45" Long and 48" Long # INXB115-123 - Inno Through Feet for Aero Crossbars - Fixed Mounting Points...
  view full answer...
• Correct Inno Square Crossbar Roof Rack for a 2023 Mazda CX-5
  If you don't have flush side rails on your 2023 Mazda CX-5 then in order to add a Inno Square Crossbar Roof Rack you'll need part # INB137, part # INSUT, and part # INK497. If you do have flush side rails then you'll want to use the Inno Square Crossbar Roof Rack part # INB117, part # INXP, and part # IN53FR. These are both great systems, it's just a matter of choosing the correct one based on what type of roof you have.
  view full answer...
• Solution For Carrying 3 Bikes On A 2016 Mazda CX-5 With 1-1/4" Hitch Receiver
  When using a 1-1/4" trailer hitch receiver, you are limited to 2 bikes and cannot carry 3 bikes; this is because class 1 receivers are not designed to hold that much weight. For a 2-bike carrier you could go with the Saris SuperClamp EX Bike Rack 1-1/4" and 2" Hitches # SA4025F. This has a weight capacity of 60lbs per bike. Then if you have a 3rd bike that you need to carry you can add a roof-mounted bike rack such as Swagman Upright Bike Rack # S64720. For this you will need a roof rack...
  view full answer...

Do you have a question about this Roof Rack?