Product Experts Available Now!
Call 1-800-940-8924
THIS ITEM IS NOT A FIT FOR
1973 AMC AMX
We'll connect you with nearby partnered installers who know this exact setup.
Inno Square Bar Roof Rack for Naked Roofs - Steel - Black - Qty 2
Part Number: IN47TR
$475.35
1973 AMC AMX
Will this fit?
To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
We'll connect you with nearby partnered installers who know this exact setup.
- All Info
- Reviews (124572)
- Q & A (0)
- Photos
Inno Roof Rack - IN47TR
Highlights
- Custom Fit for Your Vehicle: Installs on your roof with a kit designed for your vehicle.
- Complete Roof Rack System: Includes 2 square crossbars, 4 square bar feet, and a custom fit kit for your vehicle.
- Strong Steel Construction: Hardened steel bars with elastomeric coating resist corrosion and wear.
- Ready for Accessories: Square crossbars work with carriers and gear that clamp around the bars.
- Secure, Lockable Setup: Lockable leg covers help deter theft of the rack when installed.
- Stable Load Capacity: Holds up to 220 lbs; bars measure 54" long x 1-1/4" wide x 7/8" tall.
Features to know about
Carry Heavy Loads Without Worry: Hardened Steel Bars with 220-lb Capacity
These 54" long Inno square crossbars are made from hardened steel, giving them the strength to handle up to 220 lbs of gear and cargo. Whether you’re hauling kayaks, camping supplies, or lumber, the solid construction keeps your load stable and secure on every trip. The elastomeric coating adds a layer of protection against corrosion, so the bars stay strong after miles of travel and exposure to the elements.
Keep Your Gear Safe: Lockable Leg Covers Deter Theft
When you’re parked at a trailhead or campsite, built-in lockable leg covers help keep your setup secure. The locking design makes it harder for anyone to remove the rack without a key. It’s simple peace of mind that lets you leave your gear on the roof and focus on enjoying your time outdoors.
Mount What You Need: Square Bars Work with Clamp-On Accessories
These square bars give you maximum flexibility for mounting gear. They work with carriers and accessories that clamp around the bars, so you can attach kayak cradles, cargo boxes, or other add-ons without needing special adapters. It’s an easy way to make one rack system handle all kinds of adventures.
Built for Daily Use: Durable Finish Protects Against Corrosion
From road trips to weekend projects, these steel bars are made for regular use. The elastomeric coating helps guard against rust and wear caused by rain, salt, or sun exposure. That means your rack stays looking and performing like new through seasons of loading and unloading.
Simple Custom Installation: Designed for Naked Roofs
This complete roof rack system includes two square crossbars, four square bar feet, and a custom fit kit for your vehicle’s naked roof. The setup is straightforward and installs cleanly, giving you a solid foundation for carrying all kinds of gear without modifying the roof itself.
Specs
Dimensions
- Crossbar dimensions: 54" long x 1-1/4" wide x 7/8" tall
Weight and Capacity
- Weight capacity: 220 lbs
Color
- Color: black
Construction
- Construction: steel
Warranty
- Limited lifetime warranty
IN-B137 Inno Standard Square Steel Load Bars - 54" Long - Black - Qty 2
IN-SUT Inno Roof Rack Stays for Bare Roofs - Black - Qty 4
K646 Inno Fit Kit Hooks for Flush, Through, and INSU-K5 Stays
Alternate Instructions
Ratings & Reviews
4.6
126043 reviews
by:
Eli
05/13/2026
Fits great, had to order a fit kit from Japan for the vehicle, as it is JDM only, and INNO was my only option, I am glad etrailer.com had the rest of the parts I needed to get it installed and for a great price!
by:
Mike
05/31/2026
Perfect replacement for my rusted Thule crossbars.
by:
Omar
08/21/2025
2025
Honda
CR-V
This set-up fit my 2025 Honda CR-V perfectly. I was able to use my 20 yr old Thule square bars (79") which I have always used for hauling two side-by-side canoes. This saved me from replacing the perfectly good old bars.
by:
Lisa
07/23/2020
I am a fifty-four year old single woman and being able to install these roof racks by myself makes me feel empowered!!
I watched a video emailed with my delivery confirmation of an installation on a similar vehicle all the way through first, and then watched it again as I did the steps myself, pausing when I needed to.
The products appear to be of high quality, were packaged/shipped neatly and it was easy to organize everything for installation. I couldn't be happier!
I watched a video emailed with my delivery confirmation of an installation on a similar vehicle all the way through first, and then watched it again as I did the steps myself, pausing when I needed to.
The products appear to be of high quality, were packaged/shipped neatly and it was easy to organize everything for installation. I couldn't be happier!
by:
Cullen
05/19/2023
hyundai
Tucson
I am writing this review in the context of an owner of a Yakima roof rack system with round crossbars from a vehicle many vehicles prior to the 2021 Hyundai Tucson on which I just installed an INNO roof rack system with the INSUT Feet, INNO NB137 crossbars and 2 INNO INA391 roof bike racks. The INNO crossbars are rectangular in profile, rather than round, but with a grooved top that mates with the INSUT feet, the crossbars should stay firmly put where they are set in the feet. They do not weigh much, but feel pretty solid given their light weight and relatively thin metal walls. One change I would suggest to INNO is to put a factory mark on the center of the crossbars rather than supply a flimsy little decal for the user to measure and place on the crossbars. I never bothered to try to exactly center the round crossbars on my Yakima system, but it is important, at least on the naked roof of the 2021 Tucson, to properly space the feet from the center of the crossbars. I will probably eventually just put a dab of white touch-up paint to mark the center point.
by:
David
08/12/2018
Installation is easy. Just follow directions. Front bar parts are different than rear bar parts so you need to look at part numbers and use in correct location. Rack is only rated for 100 pounds but looks and feels much stronger than rating. As noted square bars do create lot of wind noise when driving. Purchase this product to carry my Canoe and it does that at almost $200 less than other rack systems on market. For me the square bars are better fit with ratchet straps to hold Canoe down. Hard to find ratchet strap with hook to fit areo bars.
Dislike. No way to level square bars. With car on level ground high point to high point on bars is level. But each bar is off by 1/8" front to back. Wish they were round bars.
Dislike. No way to level square bars. With car on level ground high point to high point on bars is level. But each bar is off by 1/8" front to back. Wish they were round bars.
by:
Jessica
07/07/2021
Toyota
Tacoma
Just finished installing on my 2021 Toyota Tacoma. Do not waste your time with the cheap paper tape measure that’s my only negative complaint.. other than that the price was right and it looks great! I had to wait a couple months for back order parts but we’ll worth the wait! I have not driven with it yet so I’m assuming there will be wind noise but I’m used to that with having a Jeep renegade as my last vehicle with the cross bars. I’m excited to haul my kayaks!
by:
Linda S
07/20/2021
2015
Ford
Explorer
This product exceeded my expectations!! Fit my 2014 Explorer with no issues. Extremely easy to install- took about 15 minutes, these crossbars are sturdy and fit perfectly in the INNO feet that secure to the roof rails- I will be hauling 2 paddle boards and have no doubts that they will travel well. I recommend this product !!
by:
Ben
05/05/2019
I did the research for a while looking at many different brands for a good quality crossbar at the right price. I came across this one a Japanese brand. As I read more about the brand it has been popular in Japan. I know Japanese product are top quality.
The crossbar, the footing and keys are made with high quality material. Instruction was very clear. Installation took about 10-15 minutes. I love that no tool required to do the install. No wind noise that I can hear at low speed. Have not tested at high speed yet. Overall, highly recommended to anyone looking for a crossbar from a great less polular brand but half the price of other more popular brand.
The crossbar, the footing and keys are made with high quality material. Instruction was very clear. Installation took about 10-15 minutes. I love that no tool required to do the install. No wind noise that I can hear at low speed. Have not tested at high speed yet. Overall, highly recommended to anyone looking for a crossbar from a great less polular brand but half the price of other more popular brand.
by:
Sean D
06/01/2019
Waited till I put the new rack to work before review. Used it the first time today and it worked Great. Seems like a very durable rack system. Love that everything is rubber coated so it doesnt scratch the paint on your car. Installing instructions where a little confusing but found YouTube videos from etrailer on how to install exact rack system.
by:
Bradley
07/16/2020
2003
Toyota
Tacoma
Good morning so the order I got is amazing I have a old school thule roof rack that I needed the write stuff so can start putting bikes on my roof an my fishing gear or some small stuff for off roading an it works great I will be sure to be buying more stuff from this site great job with the shipping it was very fast an packaging was great it was easy to install an it looks great on my 03 Toyota tacoma thanks again
by:
Tom Burger
05/23/2021
I followed directions and the rack went on without a hitch. The measuring tape provided was a bit confusing but my tape measure did just fine. It pays to watch for any movement of the stays as you tighten them. It fit perfectly. I was impressed with the quality of the unit. The torque wrench provided was a nice bonus. I attached a boat rack for my rowing shell and I’m confident it will be safe all the way to the water.
by:
David
05/10/2019
2016
Ford
Focus
The kit etrailer put together contained all the parts I needed. It took a little figuring to determine how to put it together, but in total only about 30 minutes from box opening to mounting. Now that it is all sized and spaced, it should be much quicker to remount in the future.
I installed it on a 2016 Ford Focus hatchback. I am planning to carry a Thule Cascade 1700 XT rooftop carrier.
So far it looks good. The price was excellent. While driving, it has a bit of an humming noise, but it is not loud or annoying. I like that it has a full set of keys.
All told, it seems like a good product at a reasonable price point.
I installed it on a 2016 Ford Focus hatchback. I am planning to carry a Thule Cascade 1700 XT rooftop carrier.
So far it looks good. The price was excellent. While driving, it has a bit of an humming noise, but it is not loud or annoying. I like that it has a full set of keys.
All told, it seems like a good product at a reasonable price point.
by:
H. B.
08/21/2017
First and foremost… YES! I would recommend this product to anyone, so def. read further. Price wise… well below what the more known name brands wanted for a similar setup. Product is well made , but if I had to point out one defect… the rubber shoe the rests between the factory roof bar and the inno feet detaches easily during install (see photo). I will figure out how to securely attatch it when I remove it, because (IMO) it's not one of those units that remains on perminantly.
by:
Colby
06/23/2020
Roof racks are very loud. Probably won’t keep them on all the time like I was planning. Shipping was very slow and took almost a month to get my order that was in stock. Overall the racks do what I need them to do.
by:
Lynn
07/21/2021
Easy to install. I’m happy with the product. Shipping took agile but worth it! I added kayak racks and now I’m able to enjoy my life a little more.
by:
James
06/06/2022
Quick and easy. This roof rack was shipped quickly. Installation was super easy and it looks like it was made for my truck. Holds my canoe perfectly. Thank you!
by:
James
06/06/2022
Quick and easy. This roof rack was shipped quickly. Installation was super easy and it looks like it was made for my truck. Holds my canoe perfectly. Thank you!
by:
Chad K.
03/07/2021
2012
Ford
Escape
Perfect Fitment for my 2012 Ford Escape, etrailer.com's fitment guide was spot on.
by:
Charles
03/18/2026
Fit's the truck well.
by:
Grace
07/22/2020
2015
Ford
Fusion
Great product so far! Just installed the roof rack on my 2015 Ford Fusion and everything was straight forward. I’m excited to use it while kayaking and traveling!
by:
Anton
09/02/2018
This is an excellent product. Well made. However, it comes in 3 separate packages with instructions for each. That is because some of the parts are specific to fit your vehicle. In my case, I have a 2015 Acura TLX sedan. It is important to read the directions that come with all of the components. While some of the parts look similar, they are not and must be put in the right place. Once I figured that out, it came together nicely. Attached is a photo of how the whole thing looks on my car.
by:
Alberto
11/22/2022
Really great value! No need to spend a lot on Thule. Even those these are square shaped I actually don't hear much road noise. Besides, you're gonna have music playing or riding with the windows down anyway. I would definitely buy these again.
by:
Grayson Wade
07/07/2017
Product arrived on time and packed very professionally. Was very satisfied with the overall quality of the product. Everything went right together and fit perfectly. I dealt with a gentlemen named George J. He was very professional and extremely helpful throughout the whole process with updates letting me know how my order was going. Very happy with the product.
by:
Aaron
11/20/2019
2005
Nissan
Pathfinder
I own a 2005 Nissan Pathfinder with crazy high roof rails, and this Inno system works perfectly - Now I can securely mount my Thule Hullavator kayak rack which is made to attach to square bars. I had been using a Yakima round bar setup for a few years because I had tried the Thule Crossroads Foot Pack, but just couldn't make it fit.
IMO Inno quality is equal to or better than Thule anyway. Plus Inno is cheaper.
Also customer support at etrailer.com is very good and trustworthy.
IMO Inno quality is equal to or better than Thule anyway. Plus Inno is cheaper.
Also customer support at etrailer.com is very good and trustworthy.
25
126043
true
Show More Reviews
See what our Experts say about this Inno Roof Rack
- Will Inno Roof Rack for 2016 Kia Optima Allow Water to Leak in to VehicleThe door clamp style of roof racks like the Inno part # INB137, # INSUT, and # INK685 do not allow water to leak into the vehicle. If you check out the picture I attached you can see that the clamp actually fits above the door seal.
view full answer...
- Roof Rack, Kayak Carrier and Paddleboard Carrier Recommendation for 2011 Ford Edge with Naked RoofDo you have crossbars on your roof already that run from left to right? Or what does you roof look like now? I can see what would be best option from there.
view full answer... - Recommended Roof Rack and Kayak Carrier for 2018 Honda Civic 2 DoorFor your 2018 Honda Civic 2 Door with a bare roof I recommend the Inno Aero Bar Roof Rack because it will provide you with the quietest rack available for your vehicle. This system consists of # INXB130-2 for the two 51 inch Aero Crossbars, # INXS250 for the Inno Through Feet, and # INK683 for the Custom Fit Kit. In addition to reducing noise during travel, the aero-style bars also offer a really sleek appearance and plenty of capacity to support your 2 kayaks. I have attached a short...
view full answer...
- Cost Effective Way to Carry Two Kayaks on the Roof of a 2003 Toyota AvalonFor a roof rack confirmed to fit your 2003 Toyota Avalon SLE I recommend the Inno Square Crossbar Roof Rack System which is composed of part # INB137, part # INSUT, and part # INK202. This is an excellent cost effective system for you. It has square crossbars as the title states that will accept a wide range of different rooftop carriers. The bars have a 140 lb weight capacity though you will need to check the roofs weight capacity before use. The best way to carry two kayaks on the roof...
view full answer... - Roof Rack for 2013 Ford FocusRoof rack # SR1010 is not a fit for a Ford Focus, is this the one you have? If you let me know what year your vehicle is I can recommend the right fit, but this one is not going to work on a Focus.
view full answer... - Roof Rack Options For A 2024 Honda CR-VHey Shelby, Roof rack components are all brand and even model specific so I'll need to know exactly what crossbars you have to find any other compatible components. The # INSUT feet you referenced are for Inno square crossbars. If you want to use them then you would need fit kit # IN45RR and 54" Inno sqaure crossbars # INB137. If you can get me more info on what you have or if you're just wanting to go with a whole new rack then let me know and we can figure out what the best options...
view full answer... - Recommended Roof Rack for 2014 Mazda 3 Without Fixed Mounting PointsIf your 2014 Mazda 3 does not have the fixed mounting points, I recommend the Rhino Rack Aero Bar Roof Rack. This system consists of # RRVA126B-2 for the two 49 inch Vortex Aero Crossbars, # RRRLKVA for the 2500 Series Legs, and # DK406 for the Custom DK Fit Kit. This will provide an extremely quiet roof rack system with a weight capacity of 165 pounds. If you find that your vehicle does in fact have fixed mounting points, you can use the same crossbars and 2500 Series Legs as above,...
view full answer... - Weight Capacity For The Inno Square Bar Roof Rack System For My 2019 Kia SportageThe Inno Square Bar System # INB137 # INSUT # INK686 you will have 132 lbs of dynamic weight capacity. That is the amount of weight you can have on the roof rack system while driving. Plenty of weight for a cargo basket like this one # Y07138.
view full answer... - Replacement Square Bar Solution for Older Thule Square Bar Roof RackThe older style of Thule square bars are no longer made but I do have a solution for you. The Inno square crossbars are the exact same dimensions and will fit your Thule feet so you'd want the # INB137 for a set that is 54 inches long. The new Thule square bars attach to the feet with a track on the bottom side of the bars instead of the feet grabbing around the bars.
view full answer... - Do the Inno Square Crossbars fit the Thule Pass Through Foot PacksYes the Inno Square Crossbars part # INB137 are the same 7/8" tall and 1 1/4" wide as what the original Thule Square bars were. They will work with the older Thule Foot Packs for square bars like part # TH450. As you know they are a pass through style bar so you have the option of using any length cross bar you would like. I generally stay inside the vehicle mirrors because it gives you a good reference point of how wide they are on the rooftop.
view full answer... - Square Crossbars Compatible with Older Thule Crossroad 450 FeetThe old Thule Crossroad 450 Feet were compatible with the Thule square crossbars that were a whole all the way around. The new Thule SquareBars have a slit in the bottom so they only fit the standard Thule feet and aren't compatible with the older 450 feet so we need to look to a different manufacturer. We have actually found that the Inno Square Crossbars have the same dimensions as the older Thule crossbars so they will be compatible with the older Thule feet like what you have. I have...
view full answer... - Can I use Inno Aero Crossbars on Thule Towers?I'll start out with the easiest part of your question in saying that footpacks between the two manufacturers are not going to be compatible, so you wouldn't be able to use Inno footpacks with a Thule tower or vice versa. When it comes to the cross bars, the Thule Vortex Aero Bars # TH711520 and Inno Aero Crossbars # INXB123-2 are going to be very close to the same size and they will mount in a similar manner on a foot pack, so you are able to use an Inno Aero Crossbar on a Thule tower...
view full answer... - What are the Dimensions of the Thule Square BarsI went out into our showroom and measured the dimensions of a set of discontinued Thule square load bars and found that they are 7/8 of an inch by 1-1/4 inches. This is identical to the Inno square bars like # INB137.
view full answer... - FIt and Compatibility of Inno Roof Rack on a 2014 Ford FusionThe front feet should sit flush just like the back feet do on your 2014 Fusion. The first thing to check is that you received the correct pad kit for your vehicle. After that you will want to check the orientation of the rubber pad into the foot of the carrier, I have linked an image of how to tell if this is installed properly for you to better see. Finally you will want to consult the mounting position measurements that were included with the mounting hooks. I have also linked these...
view full answer...
- Solutions for Carrying Spare Tire on 2009 Toyota RAV4 SportFrom what I understand, the 2009 RAV4 Sport was originally equipped with run-flat tires which explains why they typically didn't come with a spare tire or a good place to store one. The Buyer's Products # 3375201010 spare tire carrier is a universal fit item, so Buyer's Products doesn't offer specific mounting instructions or guidance. It would be up to the end user to determine the best placement and do the measuring to determine if the tire and mount would fit in the desired location....
view full answer... - Will the Thule Hullavator Pro Kayak Carrier Work W/ Inno Square Crossbars?I'm not quite sure what you're asking, but let me see if I can clear some things up for you. The Thule Hullavator Pro Kayak Roof Rack and Lift Assist w/ Tie-Downs # TH898 is compatible with both the Inno Crossbars # INB137 you were looking at as well as your Thule crossbars that have the channel down the middle. Since you already have crossbars you don't need to use the Inno bars . The only reason you'd need to swap your bars out would be if you don't have 4"-8" of overhang past your...
view full answer... - Recommendations on How to Safely Carry 12 Foot Jon Boat on Roof of 2013 Hyundai TucsonA great choice would be a Inno Square bar roof rack, which would be made up of the following parts: 54 inch square profile crossbars part # INB137 Inno Feet for Crossbars, part # INSUT Vehicle specific clamp kit, part # INK605 To secure the boat to the roof, using ratchet straps like # IMF14256 hooked over the crossbars would provide a secure hold for the boat. Using foam blocks like # MPG152 would protect the roof rack from the boat and vice versa, as well as adding some friction to...
view full answer... - Fitment of Older Yakima and Thule Systems on a 2014 Nissan Frontier and 2015 Ford C-MaxThank you for all of the info and the pictures! When I looked at everything it sadly looks like none of your current older equipment will fit your newer vehicles save for the Thule bars on the C-Max. For your 2014 Nissan Frontier you can either use a 1 or 2 bar roof rack with a load extender or a ladder rack (or by itself) if you want. Here is a list of the following: 2-bar roof rack: 54" Vortex Crossbars - # RRVA137B-2 2500 Series Legs - # RRRLKVA Fit Kit - # DK374 1-bar roof rack: 54"...
view full answer...
- Inexpensive Roof Rack Recommendation for a 2019 Honda Civic HatchbackI do have a cost effective roof rack option for your 2019 Honda Civic Hatchback with a bare roof but the SportRack Semi-Custom Roof Rack for Naked Roofs part # SR1002 is not a confirmed fit. Instead, I recommend using the Inno Square Crossbar System part # INB137, part # INSUT, part # INK684. This system is a custom fit for your Civic unlike the SportRack system that is semi-custom fit which means it will have a much cleaner fit/look. The custom fit system also has a higher weight capacity...
view full answer... - Recommended Kayak Carrier for 3 Kayaks on 2008 Toyota HighlanderI envy your choice of lakes for your kayaking, but I can relate to the convenience of nearby water since I have to go only 1/4-mile to hit the lake in my kayak! If your 2008 Toyota Highlander has a factory-installed roof rack with crossbars that run side-to-side then you can use the Thule Kayak Stacker # TH830. The Stacker handles up to 4 kayaks up to 10-feet in length and holds them on their sides. Please click on the video link provided. If you don't have a factory roof rack but do...
view full answer... - Will SportRack Roof Rack # SR1002 Fit a 2017 Civic EX 4DrWe do carry roof rack systems that fit your 2017 Honda Civic but the SportRack, part # SR1002, is not one of them. It only fits the Civic through 2013. Instead I recommend the Inno square bar system consisting of parts # INB137, # INSUT, and # INK684. This is the most cost effecient rack that fits your car.
view full answer... - Roof Rack Recommendation for 2018 Hyundai Tucson to Carry Thule HullavatorTo install a Thule Hullavator on your 2018 Hyundai Tucson with a naked roof (thanks for picture), you will first need to install a roof rack. For that you'd want the Inno Square bar roof rack part numbers # INB137, # INSUT, and # INK680 which is a confirmed fit and will give you bars that the Hullavator can attach to.
view full answer...
- Roof Rack Recommendation for a 2012 Honda Civic 2-DoorThe Rola 59758 only fits the 4-door models of the 2012 Honda Civic and will not fit a 2-door but we do have racks that will fit. I have included a link to the right to the options. The most economical option is the Inno system made up of the following parts: Inno Square Crossbars # INB137 Inno Feet for Square Crossbars # INSUT Custom Fit Kit # INK642 Then you can use a bike rack such as the ForkLift, # Y02098. This is a fork mount bike rack so it will not make contact with the frame of...
view full answer... - How to Transport 3 Kayaks with 2018 VW Golf SportWagenTo transport all 3 of your kayaks with your 2018 VW Golf SportWagen you will need to go with a set of roof rack crossbars and a post/stacking style carrier that mounts to them. Starting with the roof rack I recommend an Inno Square Bar System that consists of # INB137 for two 54 inch Square Crossbars and # INFR for the Mounting Feet. This will provide you with a durable system that has a 220 pound weight capacity. The mounting feet simply clamp around the factory rails on the roof of...
view full answer... - Will Inno Roof Rack for 2016 Kia Optima Allow Water to Leak in to VehicleThe door clamp style of roof racks like the Inno part # INB137, # INSUT, and # INK685 do not allow water to leak into the vehicle. If you check out the picture I attached you can see that the clamp actually fits above the door seal.
view full answer... - Replacement Lock Cover for Inno FeetHi Scott; sorry for the delay on this it took a while to hear back from Inno. The part you need is the Replacement Lock Cover Set for Inno Roof Rack Feet Stays for Bare Roofs # IN97YV. This replaces the lock and cover on the # INSUT. However, this will be a random lock so more than likely it won't match the others on your roof rack. We don't have a way to get a specific lock core for it to remain keyed alike.
view full answer... - Parts Needed to Install Older Thule Square Bars 2012 Toyota CamryHey Brian, you are on the right track for a solution to allow you to continue to use the older Thule square bars on your 2012 Toyota Camry as thankfully Inno decided to make their square bar racks to fit the exact same bar size. I am not sure how Thule feels about this haha... So what you need is the feet kit part # INSUT and the fit kit part # INK872 and you'd be set!
view full answer... - Thule Roof Rack Recommendation for 2012 Toyota Camry For a new Thule roof rack that fits your 2012 Toyota Camry the Wingbar Evo rack part numbers # TH711420, # TH710501, and # TH145149 would be a great choice confirmed to fit the vehicle and the bike racks you have as well as long as they can fit aero shaped bars.
view full answer... - Roof Rack Capacity for a 2017 Ford FiestaThe racks you see have a different weight capacity depending on if your 2017 Ford Fiesta is a 5-door hatchback or 4-door sedan. For example, the Rhino Rack that consists of Aero cross bars # RRVA118B-2, legs # RRRLKVA and fit kit # DK046 have a 110 lb capacity if installed on a '17 Fiesta that is a 5-door hatchback but the same rack has a 165 lb capacity if installed on a '17 Fiesta that is a 4-door Sedan. Choosing what model of Fiesta you have will lead you to the correct rack. I've attached...
view full answer... - Roof Rack, Kayak Carrier and Paddleboard Carrier Recommendation for 2011 Ford Edge with Naked RoofDo you have crossbars on your roof already that run from left to right? Or what does you roof look like now? I can see what would be best option from there.
view full answer... - Parts Needed to Install Old Thule Square Bars on 2000 Toyota Tundra Access Cab SR5Hey Chris! To install your Thule square bars on the roof of your Tundra you will need the Inno Feet for Square Crossbars # INSUT along with the Custom Fit Kit # INK153. What will you be using the solar for?
view full answer... - Recommended Roof Rack and Kayak Carrier for 2018 Honda Civic 2 DoorFor your 2018 Honda Civic 2 Door with a bare roof I recommend the Inno Aero Bar Roof Rack because it will provide you with the quietest rack available for your vehicle. This system consists of # INXB130-2 for the two 51 inch Aero Crossbars, # INXS250 for the Inno Through Feet, and # INK683 for the Custom Fit Kit. In addition to reducing noise during travel, the aero-style bars also offer a really sleek appearance and plenty of capacity to support your 2 kayaks. I have attached a short...
view full answer... - Roof Rack for 2010 Toyota Corolla Similar to Thule Square Bar RackThule stopped offering the fit kit you mentioned for your 2010 Toyota Corolla which means that while we have other great roof racks that can be installed on your vehicle we do not have any Thule options. For a rack that is very similar to the Thule square bar racks we have the Inno part # INB127, # INSUT, and # INK593 that fits your vehicle. This rack actually has the exact same crossbar dimensions as the Thule square bars but at a much better price.
view full answer... - How to Use Older Thule Square Bars with 2017 Toyota Highlander with Naked RoofHey John, I do have a solution for you but the Thule square bar roof racks changed a few years ago and now their current feet don't work with the older style of crossbar. The new crossbar has a channel that runs along the bottom of it whereas old style did not have this. But we have found is that the Inno square bars are exact same dimensions so you can use their feet and fit kit with the bars you have now. For that you'd need the part numbers # INK666 for the correct fit kit and part...
view full answer... - Cost Effective Way to Carry Two Kayaks on the Roof of a 2003 Toyota AvalonFor a roof rack confirmed to fit your 2003 Toyota Avalon SLE I recommend the Inno Square Crossbar Roof Rack System which is composed of part # INB137, part # INSUT, and part # INK202. This is an excellent cost effective system for you. It has square crossbars as the title states that will accept a wide range of different rooftop carriers. The bars have a 140 lb weight capacity though you will need to check the roofs weight capacity before use. The best way to carry two kayaks on the roof...
view full answer... - How To Determine Crossbar Placement On A 2024 Ford MaverickHello Warren, I can definitely help. Roof rack manufacturers test vehicle roofs to determine the strongest points. They develop their fit kits to fit in this predetermined spot. So, this measurement will vary from vehicle to vehicle. For a 2024 Ford Maverick, the front crossbar will be placed 12-1/4" back from the top edge of the front windshield. The rear crossbar will be placed about 27-1/2" behind the front crossbar. There may be a bit of front/back wiggle room, but generally you will...
view full answer... - Roof Rack Recommendation for 2008 Honda Fit for Carrying Kayak CarrierFor your 2008 Honda Fit the Inno roof rack part numbers # INB127, # INSUT, and # INK219 is a confirmed fit and would do a great job carrying a kayak carrier. For the carrier we have the Thule Hullaport part # TH849000 which will do a great job and is compatible. It's padded, can fold down when not in use, and can be expanded to carry a second kaya if ever needed.
view full answer... - Recommended Cost-Effective Roof Rack for a 2009 Chevrolet Malibu and a 2012 Nissan MaximaThe SportRack # SR1002 is a Semi-Custom roof rack. It will fit your 2009 Chevrolet Malibu and will work if you are looking for the most cost-effective option out there. If you plan on using the roof rack frequently though I highly recommend going with a custom roof rack for your Malibu. A custom rack is one that uses a fit kit specially designed and tested to fit your roof properly. The most cost-effective option we have in this category is the Inno rack which consists of the Square Crossbars...
view full answer... - Roof Rack Recommendation for 2006 Chevy UplanderThule does not make a roof rack solution that fits the naked roof versions of the 2006 Chevy Uplander. Closest thing would be the Inno brand roof rack that consists of part numbers # INB127, # INSUT, and # INK585. This won't reuse any of your Thule roof rack but your roof carriers will fit this same square bar style of rack that you had.
view full answer...
- Roof Rack for 2013 Ford FocusRoof rack # SR1010 is not a fit for a Ford Focus, is this the one you have? If you let me know what year your vehicle is I can recommend the right fit, but this one is not going to work on a Focus.
view full answer... - Cost Effective Roof Rack Recommendation for 2011 Honda AccordWhat we've found with the Sportrack Semi-Custom roof racks like the part # SR1002 is that they don't always fit the best. Reason being they are designed to fit as many vehicles as possible which means they don't fit everything perfectly. The price makes these hard to not be tempted by, but your best option is a fully custom fit roof rack like the Inno part # INB127, # INSUT, and # INK745 otherwise you'll have to get somewhat creative to get the Sportrack to fit right.
view full answer... - Roof Rack Options For A 2024 Honda CR-VHey Shelby, Roof rack components are all brand and even model specific so I'll need to know exactly what crossbars you have to find any other compatible components. The # INSUT feet you referenced are for Inno square crossbars. If you want to use them then you would need fit kit # IN45RR and 54" Inno sqaure crossbars # INB137. If you can get me more info on what you have or if you're just wanting to go with a whole new rack then let me know and we can figure out what the best options...
view full answer... - Recommended Roof Rack for 2014 Mazda 3 Without Fixed Mounting PointsIf your 2014 Mazda 3 does not have the fixed mounting points, I recommend the Rhino Rack Aero Bar Roof Rack. This system consists of # RRVA126B-2 for the two 49 inch Vortex Aero Crossbars, # RRRLKVA for the 2500 Series Legs, and # DK406 for the Custom DK Fit Kit. This will provide an extremely quiet roof rack system with a weight capacity of 165 pounds. If you find that your vehicle does in fact have fixed mounting points, you can use the same crossbars and 2500 Series Legs as above,...
view full answer... - What is the Inno Roof Rack Weight Capacity for My 2016 Toyota Tacoma Limited Double Cab?Hello Dana, Yes, the Inno Square Bar Roof Rack for Naked Roofs - Steel - Black - Qty 2 # IN79TR will be a great fit for your 2016 Toyota Tacoma Limited Double Cab without factory rails. As for the weight rating, you are only as strong as the weakest link, the feet are actually rated for 132 pounds, so I cannot recommend putting more weight on the roof rack than that. As you already know, you will want to check your owners manual to see what Toyota says you can put up there, based on my...
view full answer... - Parts Needed To Mount Thule Square Crossbars On 2016 Honda CR-VHello Chad, thanks for reaching out. I do have a solution for you, but first I will need to know exactly what kind of Thule square bars you have. Basically there are new-style and old-style bars. The new-style bars have a bottom channel for mounting the towers. The old-style bars are just a solid bar and do not have a bottom channel. We have solutions for both, just select from the following depending what kind of bar you have. New Style bars: - Evo Clamp Feet for Thule Crossbars - Naked...
view full answer... - How to Adapt Old Thule Square Bars to 2015 Toyota Prius VHello KMc; I don't think a fit kit is available but you can still install those old Thule bars on your Prius. The Thule square bars match the current Inno square bars. You can use the Inno Feet for Square Crossbars # INSUT along with the Custom Fit Kit # INK870. The full Inno roof rack # IN54XR comes with 50" bars so I would double check the length of your current crossbars to make sure they're appropriate for your vehicle.
view full answer... - How to Mount Old Thule Square Bars to 2020 Toyota CamryThanks for the pictures. What you have there are the old Thule square bars. Since none of the current Thule feet are compatible with those crossbars you will need to use the Inno Feet for Square Crossbars # INSUT. The Inno bars are the same as the old Thule so they're compatible with the feet. You will also need the Custom Fit Kit # INK498 to attach them to your 2020 Camry.
view full answer...
- Weight Capacity For The Inno Square Bar Roof Rack System For My 2019 Kia SportageThe Inno Square Bar System # INB137 # INSUT # INK686 you will have 132 lbs of dynamic weight capacity. That is the amount of weight you can have on the roof rack system while driving. Plenty of weight for a cargo basket like this one # Y07138.
view full answer... - Lowest Profile Roof Rack for a 2018 Toyota RAV4 with Bare RoofThe Rhino-Rack RS 2500 Roof Rack part # RRRS685B which is a fit for a 2018 Toyota RAV4 is about 3-1/2" tall overall and will be the lowest profile option we have followed by the Inno Aero Crossbar System part # INXB108-115, part # INXS200, and part # INK646 which is about 4" tall overall. The Rhino-Rack RS 2500 Roof Rack has a higher weight capacity (165 lbs) so this is what I recommend. I have attached install photos for you as well on both system with the first being the Rhino-Rack...
view full answer...
- How Far Does the Inno Aero Crossbar System for Bare Roofs Sit Above the RoofThe Inno Aero Crossbar System part # INXB108-115, part # INXS200, and part # INK646 while installed will be around 4" tall when measuring from the roof to the top of the crossbar but I don't have any exact measurements for you as this is not a figure the manufacturer provides. I was however able to come up with the above using the height of the mounting foot, mounting foot pad, and crossbar. I have attached a photo of the height for you on a 2018 Toyota RAV4 as well as an install video.
view full answer...
- Does INNO Roof Rack for 2015 Toyota RAV4 Include LocksThe INNO roof rack you referenced part numbers # INB137, # INSUT, and # INK646 is a confirmed fit for your 2015 Toyota RAV4 with a naked roof and it does come with locks built into the knobs of the feet that secure the bars to your vehicle roof. The crossbar spread is the distance measured on center that the bar will be on your roof when the system is installed. With this style of roof rack the bars have to be set in one position and can't be moved forward or backwards.
view full answer...
Do you have a question about this Roof Rack?
Info for this part was:
Edited by:
Daron K
Updated by:
Alex H
Updated by:
Michael B
Written by:
Ashley K
At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Kate F.
5/14/2026
Glad we had the other parts you needed as well Eli! Looks great! What do you mainly plan on using the roof rack for?