Video Transcript for Feature Breakdown: Gooseneck Coupler Handle

What's up everybody It's AJ with etrailer.com. Today we're gonna be checking out this etrailer gooseneck handle replacement. So we have a ram gooseneck coupler right here. This is gonna replace this section. Maybe your pin broke or bent. This is what you can weld on there to get it working like new again.

Let's check it out. Why you'd want to get a replacement handle for your gooseneck coupler is if it's rusted out. Some people have said that in accidents, the pin has actually bent, so it's unusable. So instead of having to get a whole new coupler set up, you can cut off the old one and replace with a new one. Now, to attach this handle to your jack, you will have to weld.

You also have to cut off the old one so you can weld the new one in place. It'll work just like the one that's already on here since it is a replacement. You see we have these two guides for the handle welded in place with the spring in the middle, and that's what's gonna give it the spring loaded. So you'll be able to hold it up, leave it there in place to disengage the coupler and then to attach the coupler. It's gonna come with everything you need with the handle, the plates and the guides, and even the spring in the middle.

You're just gonna have to have a way to cut off the old one and weld on a new one. I really like that you can just get one simple replacement part and not have to buy a whole new setup here. It's gonna be far more cost effective to just buy this and replace it and use it again. Well, I think that does it. Thanks for hanging out and hope this helped.

.