Product Experts Available Now!
Call 1-800-940-8924
UWS Rod-Connector
(1069 reviews)
Price: $4.95
In Stock
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
- All Info
- Reviews (1069)
- Q & A (0)
- Videos (1)
- Photos
UWS Accessories and Parts - UWSRODCONNECTOR
- ATV-UTV Tool Box
- Trailer Tongue Box
- Trailer Tool Box
- Truck Tool Box
- Underbody Tool Box
- Handles and Latches
- Rod Connector
- UWS
- Rod connector piece connects the latch handles to the rod inside box
- Works with paddle handles
UWS-RODCONNECTOR
Video of UWS Rod-Connector
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Video Transcript for Ultimate Overview of the UWS Rod-Connector
Hi there. I'm Michael with etrailer.com. Today we're going to take a quick look at the UWS rod connector. This rod connector is going to connect your toolbox latch handle to the rod inside the toolbox that operates that latch. It will work with any UWS box with two handles and it is going to allow that lid to be opened from either the driver's side or the passenger side of your vehicle. Give you a few pictures here to show you how that's going to connect to that rod.
You can see it's going to allow the rod to pass through and then we can easily tighten down this bolt up here with a eighth of an inch hex wrench and that will hold that rod in place and allow us to get everything connected.Do want to give you a few measurements, but they are pretty small measurements so you can see on the diagram there, the head is right about 0.62 inches. It is in total about 0.7 inches tall. The overall width of the lower part there is 0.439 of an inch, and the opening of our hole is about 0.27. I did independently verify those measurements with my own digital calipers, so I can tell you that they are accurate and this is going to be a great option for you if you need to reconnect those latches on your toolbox. That's going to complete our look at the UWS rod connector, again I'm Michael with etrailer.com.
Thanks for watching.
Customer Satisfaction Score:
99% were satisfied with this product
1% of customers were not satisfied
- Did not arrive in time
Ratings & Reviews
4.9
1069 reviews
by:
Damon
09/28/2026
These rod connectors were exactly what I needed to repair my toolbox lid latches, and a year later, they are still working perfectly.
by:
Lane
10/25/2026
Installing was good once I realized that the original ones were put in backwards. The reason for the new ones because the old ones were missing the set screws.
by:
Karl
08/24/2026
Couldn't find this thing in any store in my area. ETrailer saved me a lot of time hunting it down for a reasonable price
by:
Robin G.
07/25/2025
EZ to install. Had to replace the latch on my son's toolbox. This item was very useful in connecting the linkage rod.
by:
Jimmy
05/05/2025
Perfect fit to repair my truck tool box. Works like a new box now.
by:
Dustin
03/06/2025
Order took longer than expected but it wasn't because of this company it was due to the delays from usps the got my order shipped out fast and I've looked st the order and it looks like it's going to fit and work just fine thanks yall
Dustin
3/7/2026
The product works great I have no complaints at all thanks guys
by:
Andrew L
07/05/2016
I had spent hours trying to rig stuff up for these rod connectors, clamos, little U-bolts, etc, because I couldn't find replacement parts...Finally, I found them on your site and they work perfect!! 5 minute repair! Love it! Don't have to walk all the way around my truck any more to open both sides!
Andrew L.
7/5/2017
Still works great! Tool box opens first pull every time from either side!
by:
A B
05/13/2026
This was exactly what I needed to finish my project. I put new latches on my truck tool box and needed these to connect the cross bar. They worked perfectly. Thank you for a great product.
by:
Richard
05/26/2026
Man these things got me going big time. Old latches would not work with these connectors. new ones did . thanks ALOT!!!
by:
Roger
06/11/2026
I haven't received this uws rod-connector yet, just the key & switch
by:
Heath
06/05/2026
Absolutely the best replacement made!
by:
Barry
07/16/2019
When replacing paddle handles on truck tool box you need these to connect cross-over rod that operates second latch on the other side of tool box. They are made well, work perfectly and cost very little. It does not pay to mess around trying to create a connector with tie wire, hose clamps or such when these UWSRODCONNECTORS are available from etrailer.com and shipped quickly at very low cost.
by:
Robert
03/18/2026
Product was exectly what I ordered and the service and shipping was amazing. Will continue to do business with this group.
by:
Marty B.
05/16/2026
Exactly what I needed to refurbish the used toolbox I bought. Thanks
by:
Shawn
03/09/2026
Excellent quality on the product, but it didn't quite fit the holes on the locks, I had to drill them out a bit to get it to fit. Once I did though, perfection!
by:
David
10/23/2025
These were exactly what I needed!
I had a latch fail on a storage box, so I ordered a replacement set. What I failed to realize when I ordered them is that the replacement latches didn't come with the connector for the bar that connects the two latches together, and the ones on the original latches aren't removable.
These installed in just a couple of minutes, and most of that time was looking for the correct Allen key to fit the set screw. Easy as can be!
I had a latch fail on a storage box, so I ordered a replacement set. What I failed to realize when I ordered them is that the replacement latches didn't come with the connector for the bar that connects the two latches together, and the ones on the original latches aren't removable.
These installed in just a couple of minutes, and most of that time was looking for the correct Allen key to fit the set screw. Easy as can be!
by:
Bryant
03/19/2026
These little things are great. Easy to use. Fixed rod on my husky tool box
by:
Donald
10/29/2026
Fit perfectly
by:
Jimmy
04/25/2023
These rod connectors are so simple and easy to install. They work like they are supposed to. Etrailer makes the purchase very easy and shipping is quick. I would recommend this product to anyone who has to replace latches on a tool box.
by:
Frank
03/14/2026
Works perfect for the rod to connect to each handle for one handle opening after installing new handles
by:
Doyle
08/19/2026
It worked as it was advertised.
by:
Melvin
04/22/2025
Well, took a while but that was due to USPS losing the package.They shipped a 2nd and received pretty fast. The part was quality and did the job perfectly. See picture.thankyou
Brooke M.
4/24/2025
...better late than never?
by:
Richard
05/01/2026
Just what I needed to fix my storage box. Easy to install and use.
by:
Ricky J
10/14/2026
Very satisfied
by:
Patrick
08/24/2026
Just what I needed. No issues with installing
25
1069
true
Show More Reviews
See what our Experts say about this UWS Accessories and Parts
- Compatibiltiy of UWS Connector Rod with DeeZee Tool Box LatchI went out to our warehouse and tested the UWS Rod-Connector # UWSRODCONNECTOR with the Replacement Locking Latch for DeeZee Tool Boxes - Hook Style # DZTBLATCH1 to confirm they will work together.
view full answer...
- Set Screw Size on the UWS Rod-Connector The set screw for the UWS Rod-Connector # UWSRODCONNECTOR is a 1/8" screw that is 1/4" long.
view full answer... - Rod Recommendation for a UWS Tool BoxI should be able to help you. However, stopped carrying UWS products so we no longer stock the rod you are looking for. We just happen to have some stock of the # UWSRODCONNECTOR left over so it's still on our site. Based on the dimensions of the # UWSRODCONNECTOR if you could find a rod that is 1/4 of an inch it would work for you. You will just need to cut the rod down to the length you need.
view full answer...
- Lid of UWS Toolbox Can Still Be Opened with Lock EngagedI spoke to my contact at UWS and they informed me that the rod inside of the box that attaches to the latch needs to be adjusted. In order to do this you will need to loosen the set screw (see photo) and slide the rod either to the left or right and then tighten the set screw. This should allow the latch to catch the capture plate in the lid and prevent the box from being opened while the lock is engaged. If there is anything wrong with the rod connector you can use part # UWSRODCONNECTOR...
view full answer...
- What Size Rod is Needed for the UWS Rod-ConnectorThe UWS Rod-Connector part # UWSRODCONNECTOR is designed for a 1/4" or .25" diameter rod. We don't carry these rods but you should be able to obtain something locally and modify it to work for you.
view full answer... - Dimensions of Part # UWSRODCONNECTORThe # UWSRODCONNECTOR is the only rod connector we carry. I did include a link to replacement parts for toolboxes that we do carry. For the rod connector, I pulled one from the warehouse to take some measurements. Take a look at the photo I produced showing the dimensions.
view full answer...
- Is UWS Rod-Connector # UWSRODCONNECTOR Sold IndividuallyThe UWS Rod-Connector # UWSRODCONNECTOR that you referenced is sold individually. If you needed two you'd need to select a quantity of 2.
view full answer...
Do you have a question about this Accessories and Part?
Info for this part was:
Expert Research:
Mike L
Expert Research:
Jameson C
Updated by:
Tyler C
Updated by:
Wilson B
Updated by:
Matthew S
Updated by:
Scott K
Updated by:
Kristina F
Updated by:
Erin H
Installed by:
Michael B
At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Jimmy
5/6/2026
I bought and installed these on my toolbox right at 1 year ago and they are still in place. I have not had to re adjust or tighten them since I have installed. Great product and Highly recomended.