Video Transcript for Review of Phoenix Faucets Replacement Knob Handle Set - PF284006

Hi everyone. Steve here with etrailer.com. Today we're looking at this replacement knob handle set for the Phoenix Faucets garden tub dual handle faucets in a nice clear acrylic construction. So you're gonna get two acrylic constructed knobs, one hot, one cold. The caps here, they're labeled H and C for hot and cold, and two Phillips head screws. And those, as you know, you'll take the old cap off, using a small flathead screwdriver or something of that nature, unthread the old Philips head screw, and then pull the faucet handle off the faucet stem, and there's splines built into the plastic there into the acrylic, and they will mate up.

You'll put the new one on. You'll put the new screw inside, screw it into the stem of the faucet. Push the cap down, flush and flat, and then it's installed ready to use. They're gonna come shipped to you, probably like this with that screw inside of there loose, obviously, because it's not threaded into anything. So just keep that in mind, you'll have to take these apart probably when you get 'em to get to those new screws.

And then again, you just pop the cap on, H and C, hot and cold, and then you can use 'em as normal. Two and three quarter inches tall. These are the replacement knob handle set in acrylic clear construction by Phoenix Faucets. I'm Steven. Thanks so much for watching, have a good one.

.