See what our Experts say about this Fastway Accessories and Parts

• Dimensions of Fastway Replacement Round Spring Bar Arms for Fastway e2 Weight Distribution Systems
  All of the Replacement Round Spring Bars for the Fastway e2 Weight Distribution systems, # FA94-02-1099, # FA94-02-0899, and # FA94-02-0699, measure 31-1/2 inches long. The diameter of the bar at the upper end is 1.39 inches, and the inside groove measures 0.91 inches. I have attached a photo showing these dimensions for you. The spring bars differ based on their tongue weight capacities. The construction of the bars determines their weight capacity, rather than the size of the bar. These...
  view full answer...
  
• Replacement Round Bars & Brackets For Fastway e2 Weight Distribution Hitch
  We do have the parts you need, the frame brackets as well as the round bars for your Fastway e2 weight distribution hitch. I'm not sure if you just need the L-bracket or also the link plates, so I'll go ahead and list out each part for you: - Replacement Sway-Control L-Bracket # FA93-02-5150 - Replacement Inner Link Plate # FA93-02-5200 - Replacement Outer Link Plate # FA93-02-5350 - Replacement Hardware Kit # FA92-02-9200 Then for the replacement spring bars, the correct one will...
  view full answer...
• Can 800 lb Tongue Weight Spring Bar of Fastway e2 be Replaced with Lower Rated Bars
  Hey Michael, we do have the Fastway E2 weight distribution replacement spring bars you are looking for. If you have a trunnion/square bar setup the bars you'd need are the part # FA92-01-0699. If instead they are round bars you would want the part # FA94-02-0699. This is a single spring bar whereas the other part number I mentioned is a set of two. What trailer do you have?
  view full answer...
• Are 1,000 lb e2 Round Bars Too Much for a 412 lb Tongue Weight Trailer
  Hey Ed, thanks for reaching out! The Fastway e2 Weight Distribution w/ 2-Point Sway Control # FA94-00-1061 will be too much for your trailer if the 412 lb weight rating you mentioned is with everything fully loaded. If that's the dry tongue weight, then you will potentially be able to get the tongue weight within the 600 lbs - 1,000 lbs range that this hitch requires so it's actually effective and not too stiff. Be sure your loaded tongue weight is 10-15% the weight of the loaded trailer...
  view full answer...
• Can Different Brand Bar be Used with Camco EAZ-Lift 1000 Weight Distribution System?
  Hey Eric, thanks for reaching out! We do have a number of round bars for weight distribution, like the Fastway e2 # FA94-02-0699, with a similar design to your EAZ-Lift 1000, but you'll want to stick with the same brand when it comes to using the bars. Brand-to-brand may not fit right, and the way the bars work might slightly vary as well. To just replace the bar, you'll need to get one of the Camco EAZ-Lift 1000 bars (which we unfortunately don't carry), but if you're wanting to replace...
  view full answer...
• Solution for WDH That Covers Multiple Trailers
  Hey Mitchell! The Curt # C24UR will be overrated when towing trailers with a tongue weight under 800 lbs. If you're barely under it won't be an issue but if you're 100+ lbs under it will likely hurt ride quality instead of help. Since this system doesn't have bars with a lower rating to swap out it isn't a good choice for the kind of setup you're describing. A better choice would be the Fastway e2 Weight Distribution # FA94-00-1000. This has a wider tongue weight range of 600 lbs - 1,000...
  view full answer...
• Interchangeability of Weight Distribution System Parts
  If the Fastway round bars just so happened to fit in a Reese (Draw-Tite) weight distribution head, it would be purely coincidental. Neither manufacturer will confirm that their components will work with those of a competitor. When Draw-Tite or Fastway states that a given system is rated for a specific tongue weight, it is because each component of the system has been designed and rigorously tested to ensure that they work together. Once one component is replaced with another part, you...
  view full answer...
• Can the Spring Bars of a E2 Weight Distribution System be Changed to Weight Range
  If you wanted to change your weight distribution system to lower the tongue weight range from 1,000 to 600 you would just need to replace your bars with the part # FA94-02-0699. These bars will fit the head of your system.
  view full answer...
• How to Adjust Weight Rating of Fastway e2 Weight Distribution Hitch
  Weight distribution hitches like the Fastway e2 # FA94-00-1061 are weight sensitive. You do not want to use one rated lower or higher than the actual tongue weight of the setup. An under-rated system will not be able to do its job of shifting trailer tongue weight forward as it should and an over-rated one will result in jumpy handling from the trailer. It is possible to swap out the spring bars in the hitch to have a different weight capacity. We have three sets of Fastway round bars...
  view full answer...
• Replacement Round Bar for Fastway E2 Weight Distribution System
  We do have the single round bar replacements for your Fastway E2 Weight Distribution system. For 600 lb tongue weight use # FA94-02-0699 For 800 lb tongue weight use # FA94-02-0899 For 1,000 lb tongue weight use # FA94-02-1099
  view full answer...
• Replacement Sway Bars, Clamps, and Lift Arm for Fastway e2 Round Bar Weight Distribution Hitch
  Hey Mike! We do have parts for your Fastway e2 round bar system. For spring bars you can choose from the following: -Replacement Round Spring Bar for Fastway e2 Weight Distribution Systems - 600 lbs TW # FA94-02-0699 -Replacement Round Spring Bar for Fastway e2 Weight Distribution Systems - 800 lbs TW # FA94-02-0899 -Replacement Round Spring Bar for Fastway e2 Weight Distribution Systems - 1,000 lbs TW # FA94-02-1099 These have different ratings so you will need to choose the correct...
  view full answer...
• Replacement Spring Bar for Fastway E2 Weight Distribution System 600 lbs Tongue Weight
  For a single replacement 600 lb spring bar for the Fastway E2 WD kit part # FA94-00-0600 you would want the part # FA94-02-0699.
  view full answer...
• Compatibility of Fastway Weight Distribution Parts for Round Bar System
  Yes, you can use the Fastway e2 Weight Distribution Shank # FA92-02-4315, which provides 8-inches of drop, along with a Fastway WD head # FA94-02-1055 for a round bar system. Spring bars that are compatible include the 600-lb rated # FA94-02-0699 (you'll need two) and the 1000-lb rated # FA94-02-1099 (again, you'll need two). We also offer the spacer washer # FA92-04-9655, replacement bolts # FA92-02-9600 and spacer rivet # FA92-04-9650 that work with this e2 head unit.
  view full answer...
• Solution for Needing Replacement Spring Bar for Pro Series Weight Distribution PS49903
  Unfortunately for you and your buddy (since he owes you) that system is no longer made and because of that the replacement spring bars were discontinued. We used to carry the part number as PS58441. The most similar system offered is the Curt MV part # C17052 which has a tongue weight range of 800-1,000 lbs.
  view full answer...
• Replacing Spring Bars of Fastway E2 Weight Distribution System to Lower Tongue Weight Range
  It is possible to swap your current e2 weight distribution spring bars to better match the tongue weight of your trailer. We have options that will lower the tongue weight range down to 250-600 lbs. For a trunnion bar setup you'd need the replacement bar setup part # FA92-01-0699 which comes with two bars. Or for a round bar setup you'd need the part # FA94-02-0699 which is sold individually.
  view full answer...
• Correct Fastway e2 Weight Distribution w/ 2-Point Sway Control for a Lance 1475 Trailer
  The correct Fastway e2 Weight Distribution w/ 2-Point Sway Control for a Lance 1475 Trailer is part # FA94-00-0600 for round or part # FA92-00-0600 for trunnion. The trunnion spring bars are needed for vehicles which sit lower to the ground. The systems are both rated for up to 6,000 lbs. If you have a higher rated system, it will be too stiff and create an uncomfortable ride. The correct spring bars can be added if you have a different version using part # FA94-02-0699 for round or part...
  view full answer...
• Correct Fastway e2 Weight Distribution System for 4,700 Pound Dry Weight Trailer
  Spring bars that are rated up to 1,000 pounds might sound too high for a 4,700 pound trailer but you need to keep in mind that's the trailer's dry weight. A weight distribution system needs to be rated based on the trailer when it's loaded to work properly. So I recommend loading your trailer like it will be when you're towing and then finding out its tongue weight. In addition, any weight behind the rear axle of your tow vehicle acts as tongue weight for a weight distribution system....
  view full answer...
• Can Fastway Weight Distribution System with Round Bars be Upgraded from 600 lb to 800 or 1,000 lb
  You can swap just the spring bars of your Fastway Round Bar Weight distribution system to a higher rated setup. For that we have the part # FA94-02-1099 for 1,000 lb tongue weight or the part # FA94-02-0899 for up to 800 lb tongue weight.
  view full answer...
• Can Fastway e2 Weight Distribution for 450 lb Tongue Weight Be Upgraded to 600 lb
  To move to a different spring bar weight capacity/range you have to just replace the bars if it's a round bar setup or the bars and the head of the system if it's a trunnion setup. So if you have a round bar setup now you'd want two of the part # FA94-02-0699 and you'd be set. If it's a trunnion setup you'd want the part # FA92-01-0699 for the bar set (both are included) and then the head # FA92-02-1255.
  view full answer...
• Troubleshooting Fastway Weight Distribution System Bounce When Towing
  The Timbren system might actually cause the bounce to increase since it will push the suspension back up harder. Typically WD system bounce is due to using a weight distribution system that is rated too high for the tongue weight of the trailer. You didn't mention what system you have but the correct one for a 4,800 lb trailer would be the part # FA94-00-0600 which has a tongue weight range of 400-600 lbs. If you have a higher rated round bar setup you could swap the bars of it to the...
  view full answer...
• Replacement Spring Bar for Fastway e2 Weight Distribution System
  I believe you are asking about a replacement spring bar for your Fastway e2 Weight Distribution System # FA94-00-0600. If so, the correct part is the Replacement Round Spring Bar # FA94-02-0699.
  view full answer...
• Fastway e2 Hitch Recommendation For 2017 Chevy Colorado Towing A Forest River R POD
  While the # FA94-02-0699 replacement bars for the Fastway e2 Weight Distribution 6,000 lbs GTW, 600 lbs TW # FA94-00-0600 weight distribution hitch would not be equivalent in capacity to your existing 10,000lb system, the hitch would be sufficient if your total tongue weight is 600lbs. The fully loaded, ready-to-tow weight after you've packed in all the gear you want to carry is what you're looking for. You can use a gauge like # e99044 to confirm that when you're fully loaded like you...
  view full answer...
• How to Find the Properly Rated Weight Distribution System
  What matters in regards to a weight distribution system is the tongue weight rating and not the GTW that you referenced. A system rated too high, which your Fastway e2 # FA94-00-1000 is based on the numbers you provided, will result in a very stiff and bouncing ride that will be ineffective so you will need the correctly rated system, and I'll tell you how to figure that out. You will first need to know your total tongue weight (TTW), which is the tongue weight of your fully loaded and...
  view full answer...
• Replacement Round Spring Bars for Fastway e2 WD System with 3,500 Pound Trailer
  Replacing the higher-rated round spring bars on your Fastway e2 Weight Distribution System with the 600 pound # FA94-02-0699 that you referenced is a great idea to better match the lower weight of your new camper. These spring bars have a tongue weight capacity range of 400 to 600 pounds. With a 3,500 pound GVWR you are looking at a loaded tongue weight of around 350 to 525 pounds. Also keep in mind that any added cargo weight coming from behind the truck's rear axle will count towards...
  view full answer...

Do you have a question about this Accessories and Part?