Hello again Frank; tongue weight is typically 10-15% of your trailer weight. At 5,400 lbs you could go over the max 800 lb tongue weight of the #FA94-00-0800 but that probably isn't the case here. If you really want to be sure you could always…
The Brophy Pintle Hook for 2-1/2" Hitches part #BR27FR is designed for a 2-1/2" trailer hitch and maintains a 36,000 lb weight capacity when used correctly. That said, the actual weight capacity of the trailer hitch/vehicle can and usually…
Hey Bill thanks for the information. The C865H-9/16 in that axle tag number means you have 8 on 6-1/2 hubs with 9/16" lug studs. The Hydrastar item #HSE7K-T1, you were looking comes with 1/2" lug studs. You'll need the Hydrastar Disc…
Hello Dave, thanks for reaching out. The reason for this is certain Jayco models use underslung couplers. The Parkit360 Force Electric Trailer Dolly #PA46VR is only compatible with overslung couplers. Overslung is a lot more common than underslung.…
Hey Terry. The Parkit360 Force Electric Trailer Dolly item #PA46VR does not have turning wheels and those larger, 6-1/2" wide tires, are not going to turn on a dime. You'll have to do some maneuvering with it to pull off a sharp turn. The…
Hello Michael, thanks for reaching out. I really wish we did because that would be awesome, but I am sorry to say none of our electric trailer dollies can handle that much of a grade. The closest thing we have would be the Parkit360 Force Electric…
The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…
Hi Chris! The Parkit360 Force Electric Trailer Dolly - 10,000 lbs #PA46VR has a 2 prong plug (see attached image). I will admit to be surprised by that, but that is what they decided to go with. It isn't going to hurt anything though. What are…
Hey Wendell, thanks for the information! Since you have a Lippert 122093 hub for a 5,200 lbs axle you'll need the Bearing Kit item #BK3-300. This kit includes inner and outer bearings, races, a grease seal, and a replacement cotter pin. This kit…
Jacob, the only difference is the range. The #WS52ER gives you up to 6 inch of drop, while the #WS97WR goes to 8. Both are built on a 2.5 inch shank, both are rated 22K GTW / 2,200 lbs tongue weight, and both include the pintle plus 2 inch and 2-5/16…
Yes, you can use the Pintle Hook Mount, #63059, in either a rise or drop position. If you need a bolt on pintle hook, use #C48205. It has a 10,000 pound capacity so it has more than enough capacity for your trailer.
Hey Tom! Great question. The Parkit360 Force Electric Trailer Dolly #PA96VR (5,000 lbs) and #PA46VR (10,000 lbs) will work on an incline. However, if the grade is more than 6% you cannot use the dolly. As long as your driveway is no more than a 6%…
Hello again Frank; tongue weight is typically 10-15% of your trailer weight. At 5,400 lbs you could go over the max 800 lb tongue weight of the #FA94-00-0800 but that probably isn't the case here. If you really want to be sure you could always…
The Brophy Pintle Hook for 2-1/2" Hitches part #BR27FR is designed for a 2-1/2" trailer hitch and maintains a 36,000 lb weight capacity when used correctly. That said, the actual weight capacity of the trailer hitch/vehicle can and usually…
Hey Bill thanks for the information. The C865H-9/16 in that axle tag number means you have 8 on 6-1/2 hubs with 9/16" lug studs. The Hydrastar item #HSE7K-T1, you were looking comes with 1/2" lug studs. You'll need the Hydrastar Disc…
Hello Dave, thanks for reaching out. The reason for this is certain Jayco models use underslung couplers. The Parkit360 Force Electric Trailer Dolly #PA46VR is only compatible with overslung couplers. Overslung is a lot more common than underslung.…
Hey Terry. The Parkit360 Force Electric Trailer Dolly item #PA46VR does not have turning wheels and those larger, 6-1/2" wide tires, are not going to turn on a dime. You'll have to do some maneuvering with it to pull off a sharp turn. The…
Hello Michael, thanks for reaching out. I really wish we did because that would be awesome, but I am sorry to say none of our electric trailer dollies can handle that much of a grade. The closest thing we have would be the Parkit360 Force Electric…
The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…
Hi Chris! The Parkit360 Force Electric Trailer Dolly - 10,000 lbs #PA46VR has a 2 prong plug (see attached image). I will admit to be surprised by that, but that is what they decided to go with. It isn't going to hurt anything though. What are…
Hey Wendell, thanks for the information! Since you have a Lippert 122093 hub for a 5,200 lbs axle you'll need the Bearing Kit item #BK3-300. This kit includes inner and outer bearings, races, a grease seal, and a replacement cotter pin. This kit…
Jacob, the only difference is the range. The #WS52ER gives you up to 6 inch of drop, while the #WS97WR goes to 8. Both are built on a 2.5 inch shank, both are rated 22K GTW / 2,200 lbs tongue weight, and both include the pintle plus 2 inch and 2-5/16…
Yes, you can use the Pintle Hook Mount, #63059, in either a rise or drop position. If you need a bolt on pintle hook, use #C48205. It has a 10,000 pound capacity so it has more than enough capacity for your trailer.
Hey Tom! Great question. The Parkit360 Force Electric Trailer Dolly #PA96VR (5,000 lbs) and #PA46VR (10,000 lbs) will work on an incline. However, if the grade is more than 6% you cannot use the dolly. As long as your driveway is no more than a 6%…
WOW! I am impressed! I called to place my order and real person answered, spoke perfect English, albeit a slight southern accent, and my order was sent within a day, shipped quickly and I had it a few days later. I saved over a hundred dollars over local and installed it my self. I cant imagine how that they could do any better. THANKS!
Versatile and Durable Pintle Hitches for Heavy-Duty Towing
Pintle hitches are essential for towing heavy-duty trailers, offering versatility and strength. Ideal for military and commercial use, they can handle various trailer heights and weights. Consider compatibility with your vehicle and trailer, and the need
While installation is generally straightforward, some users have noted the need for additional mounting hardware, such as bolts, which may not be included. It's important to ensure all components are properly packaged to avoid damage during shipping, and to check compatibility with your vehicle's receiver size.
Pintle hitches are built with solid steel construction, providing the strength needed for heavy loads. They are designed to handle high weight capacities, often up to 30,000 lbs or more, making them ideal for towing large trailers over long distances without compromising safety or performance.
In real-world use, pintle hitches are praised for their durability and reliability. They perform well in towing military and commercial trailers over long distances, maintaining stability and security. Users appreciate their ability to adjust for different trailer heights, ensuring a smooth and level towing experience.
Pintle hitches are versatile because they can accommodate both pintle and ball hitch setups, making them suitable for towing a variety of trailers, from military to commercial. They often come with adjustable plates to match different vehicle and trailer heights, ensuring a level and secure towing experience.
Consider the weight capacity and adjustability of the hitch to match your towing needs. Ensure it fits your vehicle's receiver size, typically 2 or 2.5 inches. Also, check for any additional features like dual pintle and ball hitch functionality, which can enhance versatility for different towing scenarios.
Filters
