1. Towing
2. Pintle Hitch
3. Pintle Hook - Ball Combox

Hey Craig, so the Curt pintle part #C48005 that you referenced is designed for lunette rings that are 2-1/2 inch in diameter like the part #RM-581 and not the 3 inch ring part #RM-583. For a similar pintle hook that fits both sizes we have the part…

The Buyers Products 45 Ton Pintle Hook #337PH45 does not have the 4 inch square bolt pattern but rather uses a different pattern. Vertically the holes are 3 inches on center. Horizontally the top row is 5-1/4 inches on center and the bottom is…

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

Pintle hitches are made to fit certain sized Lunette rings. The rings that we carry are only available in 2-1/2" or…

The Replacement Inner Slide Channel for Dexter Model 6 #T4846500183 has a shank that measures 3" wide x…

The closest modern tire size to a 7.00-15 tire is a 225-75-15 like the #AM10256 tire you mentioned. Typically, a 225/75-15 tire will measure about 8-3/4 to 9 inches wide by around 28-1/2 inches in diameter. We offer the same size in a Load Range E…

From our experience the military trailer you have uses a standard lunette ring so a pintle hook like the Curt #C48005 would work fine.

The Buyers Products 30 Ton Pintle Hook part #337PH30 is designed for a lunette ring that has a 2-3/8" to…

The Brophy Pintle Hook for 2-1/2" Hitches part #BR27FR measures 9" from…

Hey Shawn, The etrailer #RVLG-RDBOX, Stromberg-Carlson #LG-179015, and Lippert #LC276602 are all the same exact part made by different manufacturers so they would all have a 3:1 gear ratio.

The Buyers Products Weld-On Pintle Hitch Plate #3371809043 is definitely going to be your best bet as far as a pintle mount for a 2021 Kenworth T880. It is not custom fitted for any specific vehicle, but it can be fabricated to fit virtually any…

Hello Jared, thanks for reaching out. The best front hitch option for your 2024 Ford F350 DRW is the EcoHitch #EH54QR. This hitch is made specifically for dually models, and it has the higher receiver placement that you are looking for. It is a…

Hey Craig, so the Curt pintle part #C48005 that you referenced is designed for lunette rings that are 2-1/2 inch in diameter like the part #RM-581 and not the 3 inch ring part #RM-583. For a similar pintle hook that fits both sizes we have the part…

The Buyers Products 45 Ton Pintle Hook #337PH45 does not have the 4 inch square bolt pattern but rather uses a different pattern. Vertically the holes are 3 inches on center. Horizontally the top row is 5-1/4 inches on center and the bottom is…

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

Pintle hitches are made to fit certain sized Lunette rings. The rings that we carry are only available in 2-1/2" or…

The Replacement Inner Slide Channel for Dexter Model 6 #T4846500183 has a shank that measures 3" wide x…

The closest modern tire size to a 7.00-15 tire is a 225-75-15 like the #AM10256 tire you mentioned. Typically, a 225/75-15 tire will measure about 8-3/4 to 9 inches wide by around 28-1/2 inches in diameter. We offer the same size in a Load Range E…

From our experience the military trailer you have uses a standard lunette ring so a pintle hook like the Curt #C48005 would work fine.

The Buyers Products 30 Ton Pintle Hook part #337PH30 is designed for a lunette ring that has a 2-3/8" to…

The Brophy Pintle Hook for 2-1/2" Hitches part #BR27FR measures…

Hey Shawn, The etrailer #RVLG-RDBOX, Stromberg-Carlson #LG-179015, and Lippert #LC276602 are all the same exact part made by different manufacturers so they would all have a 3:1 gear ratio.

The Buyers Products Weld-On Pintle Hitch Plate #3371809043 is definitely going to be your best bet as far as a pintle mount for a 2021 Kenworth T880. It is not custom fitted for any specific vehicle, but it can be fabricated to fit virtually any…

Hello Jared, thanks for reaching out. The best front hitch option for your 2024 Ford F350 DRW is the EcoHitch #EH54QR. This hitch is made specifically for dually models, and it has the higher receiver placement that you are looking for. It is a…