Keep your powersport vehicles safe from road salt and spray during transport with this adjustable shield. Fits trailers from 8' to 8-1/2' wide but can be modified for narrower trailers. Included quick-detach kit makes for easy removal.
Winter roads throw everything at your machines salty slush, heavy spray, and gritty runoff that freezes on contact. This front shield blocks that mess before it hits your sleds or bikes, helping protect your suspension, plastics, and controls from constant blasting on the way to the trail.
Every trailer is a little different. The shield adjusts to match trailers between 95" and 102" wide, and the panels can be modified for narrower rigs. That means you get full coverage instead of leaving gaps where spray can sneak through.
When it is time to load something tall, swap trailers, or store the shield for summer, the included quick-detach kit lets you pull it off fast. No wrestling with permanent brackets just release, lift, and you have your deck back.
Caliber creates products that work together as part of a full loading and hauling system, no matter what you ride. PolyShield supports the vehicle protection portion of that setup.
This product fills one piece of your loading system, helping every surface work together. Even a single upgrade can make loading a better experience.
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Hi everyone, Steven here with etrailer.com. Today we're looking at the Caliber poly shield for your non-enclosed trailers. Now folks, this is gonna protect your powder sport vehicle from road salt spray during transport and also improve aerodynamics on that open trailer. Can adjust to fit the width of the trailers, it can be modified to fit narrow trailers, and it includes a quick detached kit for fast and easy removal. Now, this is gonna fit trailers between 95 to 102 inches wide, and the height on this poly shield is 25 and 1/2 inches tall. Now, I wanna throw an image up of what this looks like installed.
You can see it's got three pieces. You got the far left, the far right, and in the center of those two black poly shields are in the front. You can kind of see that shorter piece bridging the two gaps. So it's got the vertical lines up and down versus slanted left or right compared to the sides. And I can show you that here close up as well.
So, this is a three piece kit. I'm gonna go ahead and pull this apart so you can see these here. So, this is just one side, and again, this is a poly shield, so nice sturdy construction. So you've got that side, and then you've got the other side, and you also got a center piece here. So I want to show you those pieces.
So that's the center. And lemme grab the other side here. So as you can see, again, 25 and a 1/2 tall on a height. And then you have your left and right, you put the center in between 'em. And then like I mentioned before, you do have a kit with a quick disconnect kit.
All the hardware. Gonna come closer for you to see that better. Some cable ties, lots of different fasteners included with that kit. You're also gonna get the three bars here, and that's gonna give you extra support on the sides and everything when you get this installed, it's gonna help hold those sides in place. So again, you get two of those L pieces, and then one long centerpiece as well. So this is our look at the Caliber poly shield for non-enclosed trailers. Again, looking like this once it's installed. And folks that's gonna wrap it up for our look together. I'm Steven. Thanks for watching.
The quality seems good bag of hardware and instructions all good no missing parts extra caps and washers in case . Did permanent mounting. 3 piece shield for easy shipping and fit
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.