Demco Lunette Ring with 5-Position Adjustable Channel - 3" Diameter - Primed - 25,000 lbs

Video Transcript for Review of Demco Lunette Ring - Standard Coupler - DM6315-97

Jeff: Hello, everybody. This is Jeff at etrailer.com. Today, we're going to take a look at this Demco three-inch diameter lunette ring with the five position adjustable channel. Has a 25,000-pound weight capacity. Now, this lunette ring is designed to couple to a pintle hitch. The channel bracket right here will allow you to adjust that lunette ring's height to match different tow vehicles.

You can see there are six different mounting holes on each side, so it offers five different mounting positions. This adjustable channel bracket will weld onto your trailer. And then you just bolt the lunette ring to the bracket, like I've done here with this included hardware. It is a sturdy steel construction. You can see the lunette ring has a nice red prime paint finish on the ring.

Offers rust resistance. And this part is made in the USA. Weight capacity on this is 25,000 pounds.Now, I do want to give you a few dimensions. We'll start with the channel. The overall height of the channel, from the bottom to the very top, is 12 inches.

The inner width is going to be just under three inches. So it probably looks like about two and 15, 16th of an inch, approximately three inches. And then the measurement on the lunette ring. The diameter of the center opening, it's going to be right at three inches. Overall diameter is right at six inches.

But that should do it for the review on the Demco three-inch diameter lunette ring with the five position adjustable channel and a 25,000-pound weight capacity.