Replacement Tongue Jack for a Down To Earth 6x10 Utility Trailer

Published 10/18/2018

Products Featured in This Question

Round Snap Ring Swivel Trailer Jack w/ Footplate - Topwind - 15-1/4" Lift - 2,000 lbs - Weld

(785)

$55.94

Round Snap Ring Swivel Trailer Jack w/ Footplate - Topwind - 10-1/2" Lift - 2,000 lbs - Weld

(786)

$58.23

Question:

The jack you suggested is way too long---the retracted length on your suggested one is 16" ----my old one is closer to 10" from centerline of the mount to the base !! The rest looks good. Got a shorter one whit the 2 1/2" mount hole ??

asked by: Norm

Expert Reply:

For your Down To Earth Trailer, I recommend the Round Snap Ring Swivel Jack w/ Footplate part # TJB-2002-B. This jack uses a snap ring swivel bracket with a 2-1/2" outer diameter. It should work with the existing bracket you have on your trailer now but if not it comes with it's own bracket that you can use if the need arises. This jack has a 2,000 lb tongue weight lift capacity with 15-1/4" of travel. It also comes with a footpad for stability.

I have attached a review video for you as well.

expert reply by: Conner L

Norm

10/18/2018

Conner L.

10/18/2018

We sure do. The Round Snap Ring Swivel Jack w/ Footplate - Weld On part # TJB-2001-Z uses the same mounting bracket as the Round Snap Ring Swivel Jack w/ Footplate part # TJB-2002-B so it should work for you. The distance from the center of the mount to the bottom of the footpad is 11" while retracted and 21-1/2" while extended so it should be just what you need.