bing tracking image
  1. Hitch Bike Racks
  2. Thule
  3. 2 Bikes
  4. Fits 1-1/4 Inch Hitch
  5. Fits 2 Inch Hitch
  6. Fits 1-1/4 and 2 Inch Hitch
Thule EasyFold XT Bike Rack for 2 Electric Bikes - 1-1/4" and 2" Hitches - Frame Mount
Special Savings on Select Thule Products.
Thule

Thule EasyFold XT Bike Rack for 2 Electric Bikes - 1-1/4" and 2" Hitches - Frame Mount

Part Number: TH903202
In Stock
ChristmasTree SantaHat Arrives before Christmas SantaHat ChristmasTree
$798.95
Retail:$999.95
You Save: $201.00
Hitch Bike Racks
Instant Rebate
zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

In Use/Installed

Customer Photos

Need help with installation?
Locate installers near me
2023 Nexus Phantom Motorhome Thule hitch bike racks. Thule reviews from other Phantom Motorhome owners. Expert hitch bike racks advice with thousands of helpful questions and answers. Great prices and fastest shipping.
  • All Info
  • Reviews (511)
  • Q & A (0)
  • Photos

Thule Hitch Bike Racks - TH903202

  • 2 Bikes
  • Fits 1-1/4 Inch Hitch
  • Fits 2 Inch Hitch
  • Fits 1-1/4 and 2 Inch Hitch
  • Platform Rack
  • Electric Bikes
  • Heavy Bikes
  • Folding Rack
  • Tilt-Away Rack
  • Frame Mount
  • Thule
  • Class 1
  • Class 2
  • Class 3
  • Bike and Hitch Lock

Heavy-duty e-bike rack has a ramp that lets you load your bikes with no lifting required. It folds up for compact storage, and it has built-in handles and wheels for easy transport. Rack tilts with bikes loaded for cargo area access. Locks included.


Features:

  • Platform bike rack carries 2 e-bikes using your vehicle's hitch receiver
  • Padded clamps with hand knobs hold bikes firmly on the rack
    • Road Dampening Technology (RDT) pads on clamps protect your bikes from road shock and vibration
    • AcuTight knobs audibly click when optimal torque is reached to prevent overtightening
  • Independently detachable arms let you carry bikes of different heights
    • Can be repositioned anywhere along upright frame to hold bikes by the downtubes or top tubes
    • Keep bikes separate and secure to prevent bike-to-bike contact
  • Ratcheting straps secure your bike's wheels to the rack
    • Extra-long wheel straps (sold separately) convert wheel cradle sets for use with fat bike tires
  • Release lever allows rack to tilt and fold
    • Tilts down with bikes loaded to access cargo area
  • Aluminum ramp helps you load heavy bikes
    • Folds up easily and stores onboard
    • Extra-long ramp (sold separately) designed for use SUVs, vans, and other tall vehicles
  • Rack folds up for easy transport and compact storage
    • Integrated handle and wheels let you roll rack to and from your vehicle
  • One-Key System hand knob and cable locks deter theft of your bikes and the rack
  • Quick and easy installation with AutoAttach system - no tools required
    • Slide shank into receiver, insert Auto Pin, and turn hand knob to tighten shank in place
  • Dual oversize red reflectors increase nighttime visibility
  • Durable aluminum and ABS construction with black powder coat is rust resistant


Specs:

  • Application: 1-1/4" x 1-1/4" (Class I and Class II) and 2" x 2" trailer hitch receivers
  • Carrying capacity: 2 electric bikes
  • Weight capacity: 65 lbs per bike
  • Maximum tire width: 3.0"
    • With fat bike strap: 4-11/16"
  • Distance between bikes: 9"
  • Maximum wheelbase: 51-3/16"
  • Maximum bike tube diameter: 3-1/8"
  • Dimensions when folded: 26-3/4" tall x 10" wide x 31" deep
  • Distance from center of hitch pin hole to:
    • Upright bar of the carrier: 8"
    • Farthest edge of carrier: 35"
  • Ramp length: 36"
  • Carrier weight: 45 lbs
  • Limited lifetime warranty


Thule EasyFold XT 4-Bike Hanging-Style Rack Locking Cable

Note: The distance from the center of the hitch pin hole to the face of the hitch must be 1-1/2" or greater to use this rack.


Approved for use on cars, trucks, vans, and SUVs - not approved for fifth wheels, motorhomes, towable campers, or flat-towed vehicles


Thule EasyFold XT

The EasyFold XT platform-style rack is specifically designed to reduce the burden of transporting e-bikes, free-ride bikes, downhill MTBs, and other heavy bikes. It includes a ramp that lets you easily roll your bikes on and off the rack without lifting. The rack folds up for compact storage and has an integrated handle and wheels that make it easy to roll to and from your vehicle. It has independently adjustable arms with padded clamps that grip your bikes by the frames. You can tilt the rack with bikes loaded for access to your vehicle's rear cargo area. It also includes locks that secure your bikes to the rack and the rack to your vehicle.


Folding Ramp

Thule EasyFold XT

A folding, aluminum ramp is included so you can roll your bikes on and off the rack- no heavy lifting required. The ramp extends 36" to create an angle small enough that you can roll your bikes up and down it with ease. There is also an extra-long, 53" ramp (sold separately) available for use when your EasyFold XT is installed on an SUV, van or other tall vehicle.


Thule EasyFold XT

The ramp fits into grooves at the end of each wheel tray.


Thule EasyFold XT

When you aren't using the ramp you can fold it up and store it onboard the rack.


Folds for Easy Transport and Compact Storage

Thule EasyFold XTThule EasyFold XT

The EasyFold XT folds for easy transport and compact storage. The wheel tray folds in half and there is a small lever under the base of the rack that lets you fold up the shank.


Thule EasyFold XT

It has an integrated handle and wheels that make the rack easy to roll to and from your vehicle.


Adjustable Arms with Frame Clamps

Thule EasyFold XT

The EasyFold XT's dual arms are detachable so you can reposition them anywhere along the upright tube to fit bikes of any frame style.


Thule EasyFold XT

Clamps with built-in Road Dampening Technology (RDT) pads grab your bikes by the top tubes or downtubes to ensure safe transport with minimal movement and noise. The clamps can be rotated to grab bike frames with angled downtubes. The clamps include AcuTight knobs that click when they are tight around your bike frames. This prevents you from damaging your bike by over-tightening the knobs.


Sturdy, Molded Wheel Trays

Thule EasyFold XT

The EasyFold XT's molded wheel trays can carry e-bikes, downhill MTBs, and most other heavy bikes. The top half of the wheel trays are made of durable, weather-resistant ABS plastic. The anodized aluminum bottom half provides a rigid outer shell without adding much weight to the rack.


Thule EasyFold XT

Ratcheting wheel straps with quick-release levers let you secure your bike's wheels to the tray. An adapter kit (sold separately) converts the wheel cradle sets for use with your fat bike tires.


Tilting Design

Thule EasyFold XT

The EasyFold XT tilts forward with bikes loaded for convenient access to your vehicle's rear cargo area. To tilt the rack, just press the handle at the front of the wheel tray. To return it to the upright position, push the rack back toward the base until it locks into position with an audible click.


Tool-Free Installation

Thule EasyFold XT

The EasyFold XT installs quickly and easily with the AutoAttach system. Simply open the SnugTite hitch pin, slide the shank into your receiver, and close the pin so it slides through the pin hole and shank. Once installed, turn the knob to deploy an anti-rattle wedge in the shank. This helps take play out of the hitch connection.


Complete Security for Bikes and Rack

Thule EasyFold XT

The EasyFold XT includes One-Key System locks to secure your bikes to the rack and the rack to your vehicle. Locks on each frame clamp knob secure your bikes to the rack.


Thule EasyFold XT

The lock on the hand knob secures the rack to your vehicle. The hand knob will spin freely when locked so a would-be thief can't operate the knob to remove the rack from your hitch. The locks are keyed alike so you can use the same keys for all of the locks. Additional One-Key System locks (sold separately) let you make all of your Thule products keyed alike.


Hitch Compatibility

Thule Apex XT 4-Bike Hanging-Style Rack 1-1/4

The rack works with both 1-1/4" and 2" hitches. To use it in a 1-1/4" hitch, simply remove the adapter with the included Allen key.



903202 Thule Easy Fold XT Tray Style 2-Bicycle Carrier for Electric Bikes and Pedelecs - 1-1/4 Inch and 2 Inch Trailer Hitches

Replaces Thule TH9032

Installation Details TH903202 Installation instructions

California residents: click here


Customer Satisfaction Score:

Ratings & Reviews

4.8

511 reviews
Heavy-duty e-bike rack has a ramp that lets you load your bikes with no lifting required. It folds up for compact storage, and it has built-in handles and wheels for easy transport. Rack tilts with bikes loaded for cargo area access. Locks included.

by:

This hitch is just as good as the description says it is!!



by:

I love this bike rack. Holds my heavy e-bike securely. It's very easy to take the rack on and off the car. The straps and levers to keep the bikes secure are well-placed, convenient, and well designed. My only complaint is that the ramp is extremely flimsy and doesn't attach well to the rack. The ramp was the biggest selling point for me (and I'm still grateful to have it) but I wish it was higher quality. I don't think I could lift my e-bike high enough without it. But it's barely possible to use the ramp with only one person. I've done it but it seemed risky like everything could fall on top of me. You pretty much need one person to hold the ramp in place and another to push the bike up the ramp.

I'll also mention two things if you're using a 1 1/4" hitch. The rack arrived with the 2" adapter installed. It was EXTREMELY difficult to remove it so that I could use it with my 1 1/4" hitch. I thought we might have to take it to a mechanic but after using two people with all their strength and almost breaking the wrench, we were finally able to get it off. The other thing to note is that the pin for holding it onto a 1 1/4" hitch doesn't go all the way through because of the angle. You can still secure the rack to the hitch using the tension handle. But there was something unsatisfying about not being able to put the metal pin all the way through.

Despite these few issues, I LOVE this rack and I'm glad I spent the extra money for an expensive rack. One of the great features about this rack is that you can open your trunk without removing the rack. Not only does the tilt-back feature work well, I'm even able to open my hatchback without tilting the rack, which is even more convenient.

I highly recommend this rack. And I also recommend buying it from etrailer. They had great customer service and shipped the item immediately. They also honored a 110% price match when I found the rack cheaper on another website.



by:

As someone with extensive manufacturing experience, I can say this is a sturdy and robust product that will work well for anyone who can follow directions and mount bikes correctly on it.

Having said that, there are a few items people should be aware of that can cause users some issues.

The included “ramp” is not tall enough to work with a standard size pick up’s trailer hitch. I have a dodge ram 1500 series and the rack sits way too high when mounted on the truck hitch for the ramp to even touch the ground.

If you plan on using a standard size pick up or a suburban or Denali type vehicle and are planning on using with heavier bikes or ebikes, buy the longer ramp made by Thule to help with getting your bikes on the rack. It costs about $[XX] and won’t nest inside the rack like the shorter one. But if you have heavier bikes or have issues lifting your bike, it’s a must have. In my opinion, Thule should have designed it with the longer ramp to start with to accommodate standard size trucks and SUV’s but it is what it is.

The mounting struts take a bit of getting used to in order to configure properly to fit your bikes. Make sure you aligned your pedals and frame so that the bike nearest the back of the vehicle doesn’t rub against the frame of the rack before locking the bike into place. Once you find the proper pedal alignment for your particular bike, everything clamps down nicely and is very sturdy.

Overall, aside from the ramp issue adding another $[XX] to the cost of the rack, I’m pleased and it should last for years. The locks are a nice feature as well. Protects your rack and your bikes from theft.

Brooke M. profile picture
Etrailer Expert

Brooke M.

4/26/2025

Thank you so much for the thorough and honest review of this rack, Josh! Taking into account the height of your pick up is definitely a nice heads up to have. The ramp being 36 inches long does limit its use a little bit. I hope you are able to get out and use your bikes a lot this spring!



by:

This is a very solid piece of equipment. It took some time to come up with the perfect configuration for my two electric bikes, but the rack is designed with a lot of flexibility to accommodate so many different positions and I was able to find the one that worked for me. Now that I got it, I took photos and I will be able to mount the bike more and more quickly with practice. It folds down to allow very easy access to my Prius hatchback. I can stand right in front of the open hatch with no problem. I'm thrilled!



by:

After one year we are very happy with this rack. We’ve taken our ebikes on long trips with no problems and felt the bikes were always safe and secure.

David profile picture

David

11/2/2025

We love the rack and have used it to travel thousands of miles with our bikes. The only problem is the ramps. They have always been difficult to lock into place. Now they don’t work at all.



by:

We have 2 electric bikes, one of which weighs 66 lbs. so I was looking for a rack with ramps. This also has wheels to transport the rack from garage to car without having to carry it.
Let me tell you, the wheels made this rack worth every penny.Lot of racks have ramps, this is the only one I found with wheels and they are a game changer.
Once the wedge is tightened into the hitch there is no play/wobble at all.

Heather A. profile picture
Etrailer Expert

Heather A.

4/15/2025

The wheels were such a great addition to the design of this rack! Makes it sooo much easier with the heavier bikes. What kind of e-bikes are you using?



by:

It is light and very easy to use. The instructions are so vague you tube came in handy. ETrailer was very quick to deliver… All and all it was a good experience.



by:

Easy to put together and put on my car. The ramp works great to get my e-bike up on the rack. Very solid with no shaking when driving.



by:

I splurged a bit on this bike rack after reading the reviews and watching the videos. I have to say I am glad I did. This an OUTSTANDING bike rack. It is very solid, easy to load and secure my two bikes, holds an ebike very well, folds easily for storage and for carrying, and tilts easily when the bikes are loaded. I also like that it locks my bikes.

Steve profile picture

Steve

12/2/2024

Very Good



by:

Ce bike rack. Took a couple of times using it to figure out how to use it.



by:

The Thule XT bicycle rack does not take two fat tire e bikes. But is great with 1 fat tire e bike and a normal off road bike. I tow the ebike and mountain bike to Houston at least twice a month and have no worries at all. But it will not tow two ebikes. Could someone recommend one that carries two fat tire ebikes. Specifically Himiway ebikes.

Heather A. profile picture
Etrailer Expert

Heather A.

5/24/2021

Thank you for your review. The Thule EasyFold XT Bike Rack for 2 Electric Bikes does carry 2 fat tire e-bikes as long as they do not weigh over 65 lbs. a piece. You will need 2 sets of the Fat Bike Straps part # TH985101 to adapt the straps for the width of the fat tires.



by:

This rack is perfect! eTrailer had it shipped and at my home in almost no time. I drove with it on the car today, and it was solid and secure. It's super easy to get on and off the hitch. I'm 5'1 and I was able to load the bike on with the ramp without a struggle.

Thanks for the thorough video and comparison information. It made this purchase easy.



by:

I purchased the rack and receiver hitch a year ago. Installation of the rack was made simple with the installation video that was specific to my vehicle (2020 Honda Accord). Literally took less than an hour start to finish. Only tool that I needed to buy was a torque wrench, which was about 20 bucks. It did require a very small cut in the plastic bumper that was accomplished easily with a keyhole saw. There was no drilling or other significant issues.

The rack itself is awesome! My wife and I have two Lectric XP3 bikes. They weigh about 65 pounds each with battery. When we travel I revome the batteries to save a bit of weight. I have made two cross country trips (over 6000 miles) with this rack and have never had an issue. Literally every gas stop or hotel stop someone asks me about the rack and bikes. It really is that nice. My wife usually scolds me because we lose a 1/2 hour of travel time each stop to visit with complete strangers:)

The rack is easy to install and remove on the receiver hitch. The lockout feature works great and gives a great deal of peace of mind.

The bikes are easy to load. I don't use it, but there is a ramp that could make loading the bikes easier if a person couldn't lift the bike onto the rack.

There are two arms the lock onto the frame of the bikes similar to the receiver hitch. Once locked down the bikes will not move.

I would recommend ordering the longer ratchet staps if you have fat tires. I think they cost around 20 bucks but the longer straps allow for a little more flexibility in arranging bikes on the rack.

I would strongly recommend this product and this company.



by:

First the negatives: if you have a aftermarket mid-drive electric beach cruisers to load using the ramp you'll run into a bit of a problem. When loading the first one you'll bottom out mid way up the ramp, meaning the motor hits and you'll need to lift up the back end of the bike to get it up there. Then you'll need to lean the bike toward yourself to get the pedals past the upright black bar that the holders are attached to, this is a bit awkward due to the weight of the bike, the angle and height you are working at. You are probably better off just lifting this style of bike onto the carrier. When loading the second bike you can forget about using the ramp all together due to how narrow the placement is on the carrier between the two bikes. To me this carrier appears to have been designed for lightweight road bikes that have narrow profiles.

One of my cruisers has fat 3.5 inch tires. Before purchasing the carrier I did ask one of the experts on the site if I would be required to purchase the extra long tire straps. He said "NO" and that the carrier could accommodate tires up to 4-11/16, well that question has since been modified to read "YES" you do need to purchase the extra long straps.

Some positives: The ability to roll the carrier to the car is a nice feature. The way it screws to the hitch and it's ability to lock to the hitch is a plus. The bike clamps feel very secure and gives a peace of mind that your bikes are firmly in place and not going anywhere, even when parked thanks to the locking feature of the clamp.

A decent carrier with some flaws.



by:

Found the bike carrier with ramp to be extremely easy to use, it is light maneuverable & storable. I have a four-wheel-drive full-size Chevy Silverado pick up with a Lance 8.5 over the cab camper. Using a 7 inch hitch extension, I’m able to still enter the camper with the carrier in the down position, as shown in the picture. With the camper on the truck it’s easy to get my Mt. bike And my wife’s E bike on & off the carrier with the ramp. But with the camper off the truck the ramp is almost straight up and down, the truck is not low enough, and the ramp is not long enough. So I have to put a 10” step bench underneath the ramp so that I can get the bikes on and off using the ramp. I also purchased the Swagman RV horizontal 2 bike bag. The problem with the bike bag is that the little hole that slips through the hitch receiver is not big enough to go over the wheels of the carrier. So you must cut a hole big enough (10”x12”) to expose where the ramp is stored and the carrier latch points are exposed, so that the carrier will snap back & lock in the upright position. Then the bag will fit two bikes with this bike carrier.



by:

This is the second Thule Bike carrier which I have purchased from etrailer for my e-bike. The previous one was damaged beyond repair on i-95 in Georgia in a stop and go traffic situation when we were rear-ended. Although expensive, this was is the best bike carrier for my e-bike which is too heavy for me to lift up onto a bike rack because it utilizes an integrated ramp. Also, it is rated to carrier more weight than a typical bike rack. I have been very pleased with this product and ease of use for a 125lb woman!



by:

Easy to use and compact to store



by:

I don't know what I can say good about this Thule EasyFold XT 2 E-Bike Platform Rack that hasn't already been said before.
The designers of this rack knew what they were doing. As the old saying goes, "They Built A Better Mouse Trap"!
It's light weight but sturdy, secure, fender friendly, compact, portable, easy to install, no assembly or tools required and easy to load bikes on .
I was reluctant in purchasing this rack because of the initial cost but after much research I come to the conclusion as with many other purchases, that in most cases you get what you pay for.
I really like the one person ease of loading and solid method of securing the bikes, the built-in 3 security locks using the same key, the fold-up compactness for storage and the ramp to aid in loading our 63 lb. E-bikes.
If your spending $4,000 to 8,000 for E-Bikes don't cut corners. Keep them save and secure going down the road.
I highly recommend this Thule Hitch Bike Rack for E-Bikes.



by:

We purchased the Thule EasyFold XT 2 E-Bike Platform Rack from etrailer.com in May 2019. I received the Rack within a week, and the packaging was excellent. As the video describes, the EasyFold is very compact, relatively light weight, and easy to install & use. Adding two, 60-pound fat tire e-bikes was very straight forward, and we are very impressed with the security features for this rack – both on the bike clamps and the stinger. The near horizontal tilting away from the car is a nice bonus. This rack is well built and easy to handle such large e-bikes, and we highly recommend this product.



by:

Always pleased with customer service and quick shipping.

Thank you



by:

Very pleased with this bike rack for my electric bike. I have used it behind my 2012 Ford Explorer and Motor-home. My bike is a fat Tire so I ordered the longer wheel straps and the longer ramp. Straps work excellent. I am 71 and the ramp is two narrow for fat tire bikes and are hard to keep bike on them for loading or unloading. I ended up making my own ramp by using a pet ramp and attaching ends that fit into both ramp slots of the carrier. Now it's a breeze to load and unload the bike without any help from others. This is a great carrier and I would recommend it to anyone with electric bikes



by:

I love our new rack! Thule is amazing with their design. I have an ebike and it’s just too heavy for me to lift and place on a rack. Thule has designed a rack with a ramp. I have NO problem rolling my 58 pound bike up the ramp and into the saddles easy to secure the bike and there is no wobble at all when I drive. I’ll be riding A LOT more now that I can transport my bike easily and securely.
BTW, etrailer.com is a great company. Their customer service is amazingly helpful.



by:

This is, without exception, the BEST bike rack we have ever owned. We have two e-bikes, which bring with them special considerations insofar as racks are concerned: we have to be able to cover them and since e-bikes are heavier, the racks really have to be up to the task. We have purchased other racks, even one recommended by our bike manufacturer, to great disappointment. This Thule rack is simple to mount, extremely stable and easy to cover. We drove 3,240 mile cross-country with two 48-pound bikes on the back of our Jeep and didn't have a single problem. GREAT CHOICE!



by:

I've had the Thule EasyFold XT Bike Rack for a year now and have used it to transport my 2 Specialized e-bikes on several occasions. It has worked well and I've had no problems. It's a little heavy but the fact that it has it's own wheels to roll to and from my car eliminates any problems.



by:

Excellent bike carrier that’s easy to use! I added on the longer straps to accommodate the fat tires on our ebikes, but other than that, I was able to unbox the rack and install/use it immediately. These bikes weight 63lbs apiece and this rack handled the weight with little swaying over the course of our 250 mile round trip. It might be a little pricey, but it sure gave me confidence that our bikes were safe and not going to be stolen or become hiway trash during the course of our trip.


25
511
Show More Reviews

See what our Experts say about this Thule Hitch Bike Racks

  • Is There a Ramp Made for the Hollywood Racks RV Rider
    Hey James, the Hollywood Racks RV Rider bike rack does not have a ramp option made for it. Do you have this bike rack already? If not, I'd go a different route for the e-bike rack like the Thule Easy Fold XT part # TH903202.
    view full answer...
  • Replacement Parts for Thule EasyFold XT 2-Bike Rack
    The rack you mentioned is available with the Thule EasyFold XT 2-Bike Rack # TH903202, and we do offer a number of different replacement parts for it. - Replacement Short Arm Assembly # 7525491002 - Replacement Long Arm Assembly # 1500052414 - Replacement Transport Wheel Assembly - Left Hand Side # TH27RV - Replacement Transport Wheel Assembly - Right Hand Side # TH96JJ - Replacement Left Reflector # 8527791002 - Replacement Right Reflector # 8527791001 - Replacement 2" Hitch Adapter #...
    view full answer...
  • Platform-Style Hitch-Mount Bike Rack for 2 Electra Townie Step-Through Frame Bikes
    Your Electra Townie step-through-frame bikes pose a challenge to finding a suitable hitch-mount carrier since the bikes lack both a top frame tube and since they have fenders. These features make most carriers unsuitable since most use either the top frame tube or the front tire as the contact point for the arm that holds the bikes in place. One carrier from Thule, their EasyFold 2 Bike Rack # TH903202, includes some great features that may make it a good choice for you. It has a ramp...
    view full answer...
  • Best Bike Rack that Allows For Easy Loading Of the Bikes and Into The Hitch
    It sounds like you may have an electric Sun bike Jo. If you have an electric bike I recommend to use the Thule EasyFold XT 2 E-Bike Platform Rack part # TH903202 because of the included ramp and easy folding feature. The rack does weigh 45 lbs but it can be folded in half and is designed with a handle so you can easily carry it to the vehicle. Once you have the bike rack in the hitch you can simply walk the bike up the included ramp onto the rack instead of lifting the bike. The Thule...
    view full answer...
    Image 1 for Image 2 for
  • Best E-Bike Rack Recommendation to Carry Rad Rover Step Thru Bikes with Fat Tires
    The Thule Easy Fold XT E-bike rack part # TH903202 that you referenced is definitely the best e-bike rack around and what I would recommend for your Rad Mini Step Thru bikes. Since they have fatter tires you'd just need the fat bike straps part # TH985101 and you'd be set. You'd need a set of these for each bikes since included straps can fit up to 3 inch wide bike tires. The reason this is considered to be the best e-bike rack is because it has an easy to use frame clamp design that...
    view full answer...
    Image 1 for
  • Can the Thule Extra-Long Loading Ramp # TH933402 be Modified to Fit the Thule T2 Bike Rack?
    I have a solution for you. The Extra-Long Loading Ramp for Thule EasyFold XT # TH933402 is only constructed to attach to the Thule EasyFold XT Bike Rack # TH903202. The Thule Easyfold XT has slots below the platforms that allow the connecting piece of the loading ramp to fit into the rack. Unfortunately, the Thule T2 does not have that opening. With that being said, I recommend the Thule Easyfold XT Bike Rack # TH903202 if you are having trouble with loading your e-bike onto your T2. The...
    view full answer...
  • Is RockyMounts MonoRail Compatible with E-Bike That Has Fenders
    We do have bike racks for your application but since the RockyMounts MonoRail 2 Bike Platform Rack # RKY10003 secures bikes by the wheel the ratcheting arm need to rest right where front fender is located. Instead you need to use a bike rack that secures the bike by the frame. We have 2 different styles in the same price-range as the MonoRail with the Hollywood Racks Sport Rider SE # HLY74FR and the Saris Freedom # SA4412B-R. The Sport Rider SE uses the same type of ratcheting arm as the...
    view full answer...
  • Yakima OnRamp or Thule EasyFold XT For Fat Tire Electric Bikes
    The Yakima OnRamp Bike Rack - 1-1/4" Hitches # Y28DJ or 2" Hitches # Y88DJ does not require added straps for fat tires, as they are able to fit tires up to 5" wide, though the Thule EasyFold XT - 1-1/4" and 2" Hitches # TH903202 require additional straps for fat tires, and here is what you'd need: - Thule EasyFold XT Bike Rack for 2 Electric Bikes # TH903202 - Fat Bike Straps for Thule EasyFold XT Bike Rack # TH985101 While both come with an integrated ramp, the EasyFold XT offers a...
    view full answer...
  • Replacement Lock Core for Thule EasyFold XT Short Arm Assembly
    We do have replacement lock cores that you can use for the Thule EasyFold XT Short Arm Assembly # 7525491002 you purchased. If you want to match it with your current lock cores on your EasyFold XT # TH903202 then I'd need to know the lock core number (printed on the face of the core or on the side of the body itself) to get you the correct one that matches what you currently have. If you don't see the number on the face of the core then you can use the Universal Change Key # 853-1251...
    view full answer...
  • Does The Thule EasyFold XT Bike Rack Need an Adapter To Fit a 2" Receiver?
    Yes, the Thule EasyFold XT Bike Rack # TH903202 will fit in a 2" class III receiver. The rack will come with a removable adapter if you need to use it on a vehicle with a 1-1/4" receiver. This adapter is held in place with 2 screws so you are not trying to align the adapter with any hitch pins. We do have the Extra-Long Loading Ramp # TH933402 that is 17" longer than the included ramp and works best on your taller trucks and SUV's.
    view full answer...
  • How to Choose the Best E-Bike Rack
    There are a wide variety of E-Bike racks that we carry and the best way in filtering through them is by looking at these points: Weight Capacity Style/Compatibility Pricing Weight capacity is important because it can vary between bike racks. For example, the best racks (in my opinion) for E-Bikes are the Hollywood Racks Sport Rider SE # HLY74FR (80 lbs per bike), the Thule EasyFold XT # TH903202 (65 lbs per bike), and the Kuat NV 2.0 Base # BA22B (60 lbs per bike). When factoring in weight...
    view full answer...
  • Will Thule EasyFold XT Bike Carrier Work With Jeep Wrangler That Has Spare Tire
    You can take a quick measurement to see if the Thule EasyFold XT Bike Carrier, part # TH903202 will work on your Wrangler. You will need a tape measure and a straight edge like a yardstick or a dowel. Place the straight edge vertically against the back of the spare tire, letting it extend below the trailer hitch receiver opening. Then measure from the center of the hitch pin to the straight edge. This will give you the distance you need to clear the spare tire. I have attached a link...
    view full answer...
  • Best Bike Rack for E-Bikes with Fenders That Doesnt Rub
    I have a few different bikes racks for you that will carry e-bikes with fenders. That said, you will need to go with a frame mount style as you can't use a wheel mount bike rack on a bike with fenders. The best option for you will be the Hollywood Racks Sport Rider SE 2 Electric Bike Rack part # HLY84FR which has an 80 lb per bike weight capacity and soft padded frame hooks so you don't have to worry about rubbing. If either of your bikes has a steep drop tube frame then you will also need...
    view full answer...
  • Can Thule EasyFold E-Bike Rack Carry Aventon E-Bike
    The Thule EasyFold XT part # TH903202 would be a great rack to use with your Aventon e-bikes and you would not need to use the bike frame adapter bar as we have confirmed this with customers who have this rack and also your bike. You will need the fat bike strap kit part # TH985101 though.
    view full answer...
    Image 1 for Image 2 for
  • Will the Thule EasyFold XT 2 Work with my Trak Verge +2 Ebikes and my Class 3 Hitch
    Yes the Thule EasyFold XT 2 E-Bike Platform Rack part # TH903202 will work out great for your Trek Ebikes. The dual arm that hold the bikes in place are multi directional and can be turned at any angle to grab a hold of the bikes and secure them properly. I really like this rack and think it does a great job. Check out the video I did on it showing more details on the clamps that I've linked for you.
    view full answer...
  • 2019 Mercedes-Benz Sprinter 2500 Bike Rack Recommendation for Swing Away Adapter
    No, you do not want to use the Thule EasyFold XT # TH903202 with the Yakima BackSwing part # Y02483 because of that 2" solid shank requirement. If your bike doesn't have a front fender then you can use the BackSwing with a rack like the Kuat Transfer V2 # KU84FR or NV 2.0 Base # BA22B. I really like the Kuat line of bike racks because they put a lot of thought into the designs so you get great quality and easy-to-use racks. Attached are review videos of both for you to check out.
    view full answer...
  • Why Doesn't Hitch Pin on Thule EasyFold XT Bike Rack Lock In Place
    The AutoAttach pin on the Thule EasyFold XT Bike Rack # TH903202 is essentially just a guide for ensuring that the shank of the rack is far enough into the hitch receiver that the rack is secured. Once the AutoAttach system is lined up with the hitch pin hole and it snaps in place then you use the anti-rattle knob to expand the shank to take all of the wobble out of the rack. The anti-rattle knob can then be locked which prevents the bike rack from being removed even if that AutoAttach...
    view full answer...
  • Best Hitch and E-Bike Rack for 2018 Audi A3
    The hitch I suggest for your 2018 Audi A3 is the Curt # C11399. I recommend this Class I hitch because it easily bolts on with included hardware (no drilling except you will need to enlarge some existing holes) and because its main cross tube will be mostly hidden behind your rear bumper fascia for a clean look. Installation instructions are linked for you. Since you have fairly heavy e-bikes you'll need a special bike rack made for that extra weight. The rack that I recommend is the industry-leading...
    view full answer...
    Image 1 for
  • Does Thule EasyFold XT 2 Require Fat Tire Bike Straps for 3-1/2 Tires?
    The Thule EasyFold XT 2 # TH903202 can fit tires that are up to 4-11/16" wide with Fat Bike Straps # TH985101. The EasyFold XT is one of the best bike racks available due to it's ability to transport many different types of bikes and the quality-of-life features it offers. This rack can carry bikes with wide tires and has a 65 lb per-bike weight capacity; it also has detachable arms that can be repositioned to hold bikes of different heights by the downtubes, a hand knob to tighten the...
    view full answer...
    Image 1 for
  • Hitch And Bike Rack For Carrying Two Lectric XP4 Ebikes On A 2016 Chrysler 200
    Hi Gregg! We do have a hitch available for your 2016 Chrysler 200 with the Curt Trailer Hitch Receiver - Custom Fit - Class I - 1-1/4" # C11403. As this is a Class 1 hitch, your options for a bike rack will be more limited. The Lectric XP4 bikes being as heavy as they are will limit that even more. With the battery taken out, a Lectric XP4 will weigh 62 pounds and that made one more option available. I will warn you, the two options that will work with a Class 1 hitch and bikes that weight...
    view full answer...
  • How Would Thule EasyFold Secure Specialized Como and Vado 4 Bike Racks
    Hey Johnny, so the top tube of the Como or the Specialized Vado 4 would be fine to secure them to the Thule EasyFold XT # TH903202. This bike rack was designed to secure bikes with and without horizontal top tubes so it would work fine on either type setup.
    view full answer...
    Image 1 for
  • Recommended E-Bike Bike Rack for a 1-1/4" Hitch on a Flat Towed Vehicle
    Hey Jonathan thanks for all the information! I've got one bike rack that is going to meet your needs it's the Kuat NV 2.0 Base 2-Bike Platform Rack item # BA12B. This wheel mount bike rack has a 60 lbs per bike capacity. It's designed to fit class I 1-1/4" and is rated to be used on a flat towed vehicle. The wheel straps fit tires up to 3" wide. There is one fat tire adapter included that expands to accommodate up to a 5" tire. A second adapter can be purchased separately if required item...
    view full answer...
  • Hitch Recommendation for 2017 Hyundai Sonata Hybrid to Carry Bike Rack
    Only vehicles with higher towing capacities like SUVs and trucks will have the 2 inch hitch size available since it's a higher capacity size. For your 2017 Hyundai Sonata Hybrid we only have 1-1/4 inch hitches available like the Curt part # C11402 which will work great to carry a bike rack but it has to be a bike rack designed for this hitch size like our very popular Hollywood Racks Sport Rider part # HR200Z which would be a great solution since there isn't a way to use your current bike...
    view full answer...
    Image 1 for
  • Bike Rack Recommendation for Carrying Giant LaFree+1
    We have the perfect bike rack fro your Giant LaFree+1 that is heavy, has fenders, and has a deep step through frame with the Thule Easy Fold XT part # TH903202. This rack was designed for heavier e-bikes that commonly have the step through frame and fenders so it will work great with yours. I attached a picture that shows a similar bike setup as yours secured to it. What's also really nice about this bike rack is that is has a ramp that stores in the rack too which makes loading and unloading...
    view full answer...
    Image 1 for


< Previous
123. . .59



Do you have a question about this Hitch Bike Rack?


Info for this part was:

Employee Mike L
Expert Research:
Mike L
Employee Jameson C
Expert Research:
Jameson C
Employee Adam R
Expert Research:
Adam R
Employee Tyler C
Edited by:
Tyler C
Employee Jacob T
Video Edited:
Jacob T
Employee Dustin K
Video Edited:
Dustin K
Employee Chris R
Video Edited:
Chris R
Employee Zach D
Video Edited:
Zach D
Employee Jonathan Y
Video Edited:
Jonathan Y
Employee Colin H
Test Fit:
Colin H
Employee Randy B
Test Fit:
Randy B
Employee Shane H
Test Fit:
Shane H
Employee Conner L
Test Fit:
Conner L
Employee Jacob H
Test Fit:
Jacob H
Employee Adam E
Test Fit:
Adam E
Employee Robert O
Test Fit:
Robert O
Employee Evangeline M
Test Fit:
Evangeline M
Employee Trevor W
Test Fit:
Trevor W
Employee Wilson B
Updated by:
Wilson B
Employee Noah M
Updated by:
Noah M
Employee Manda E
Updated by:
Manda E
Employee Carrie F
Updated by:
Carrie F
Employee Matthew S
Written by:
Matthew S
Employee Thomas T
Video by:
Thomas T
Employee Schuyler H
Video by:
Schuyler H
Employee Charles A
Video by:
Charles A

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.


<