To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
This fully welded, corrosion-resistant vehicle trailer hitch receiver is perfect for your light-duty towing needs. Draw-Tite's Tested Tough guarantee ensures that this hitch exceeds industry standards. Drawbar sold separately.
Features:
Specs:
Draw-Tite's Tested Tough program provides testing standards far superior to those outlined by the Society of Automotive Engineers (SAE), the go-to source for engineering professionals.
Each Draw-Tite trailer hitch receiver undergoes extensive fatigue testing and static testing with the ball mount that is either supplied or recommended for use with that particular hitch, thus ensuring results that are applicable to real life use. Fatigue testing is also conducted on hitches rated for use with weight-distribution systems.
In addition, Draw-Tite performs static testing on a simulated automobile, as opposed to the rigid fixture used for SAE testing, resulting in a more true-to-life scenario.
At etrailer.com we're committed to the products we sell, and to our customers. Our experienced and knowledgeable staff are available via both phone and email to address your questions and concerns for the lifetime of your hitch. The technicians at etrailer perform hitch installations on a daily basis, making them a valuable resource for do-it-yourselfers. The one-on-one, personal service you'll receive comes straight from an expert in the towing and automotive field. We've installed it, we've wired it and we've towed with it, so whatever your question, we can answer it.
California residents: click here
The hidden hitch is an excellent product, much sturdier than I had expected. It is a solid hitch. It was easy to install and the videos made it very simple. I did have to modify a plastic guard that covered the open fender well on the drivers side behind the back wheel. It was easily removed, (something not shown in the video) and easy to cut a small slot to slide over the side bracket of the hitch after it was installed. We have also, already attached and used our new bike rack with the new hitch. The new hitch does everything they say and everything we need it to do.
Installation was easy. Hitch fits and looks good. The online video was very helpful.
the hitch and electrical was very easy to install ,it took about 2 hour total, the autos paneling was the hardest part.
The video shows that the factory holes in the frame match up to the hitch. This was not the case for my 2012 Elantra. It also did not mention that my muffler will need to be moved out of the way to drill the new hole. This is more than I feel comfortable doing to my brand new car, so I will have to pay a professional to do the installation. The hitch and hardware seem to be as shown on the website.
If you are looking for a great selection, speedy delivery, low pricing, and no hassle, look no further. I ordered two trailer hitches after getting crazy prices elsewhere. I got two for the price of one installed. I followed the excellent video directions and in less than 30 minutes, my van and car were ready for bike racks and cargo boxes. Thanks, etrailer. You Rock!!!!!
Haven't had a chnce to try it out yet but the Sportframe Trailer Hitch Receiver - Custom Fit - Class I - 1-1/4" - 24864 and Vehicle Wiring Harness with 4 Pole Trailer Connector - C56126, installed both in about an hour. fit right the first time. magnetic pull wire work great for installing bolts.
To Drill or Not to Drill!
I ran into the same problem as "Gul-A-Bull". I understood that there was a possibility of having holes drilled, but there was such a gross misalignment between the hitch and the holes that it felt I ordered the wrong hitch! The men and women at etrailer are great! They talk to you like a real human being by phone and email. They understood my confusion and sorted it all out.
The bottom line: this is the correct hitch. If your 2012 Elantra was manufactured in Alabama, the hitch holes will probably line up just fine. However, if your 2012 Elantra was manufactured in Uslan, Korea - you will have lower the muffler and drill holes (or let a hitch installer do it).
If you do not know where your car was manufactured, here are some possible guidelines:
- VIN# starts with a K
- GLS with preferred equipment package
- Limited
- Limited with Premium Package
- Hankook tires
- Paint colors have different names (e.g. Black Noir Pearl (Korea) vs. Midnight Black (Alabama). you'd have to research.)
- OR take your VIN to the dealer and ask
The hitch is PERFECT. I love it.
I wanted to get away from trunk mount bike racks and needed a receiver.
Installation went exactly like the online video, it could not have been easier. Obviously a well thought out product and install plan. I watched the install video and was done in less than an hour. My buddy was convinced I had previous experience. It really is as easy as they make it look.
I have been very happy with my trailer hitch mount. I was a little apprehensive about installing it on my 2016 Hyundai Elantra before I got started, but installation was easy. Installation was easy with the instructions and video provided by eTrailer. Everything thing has gone, as they say, without a hitch. Sorry could not pass up a good pun. I have done business with eTrailer for roof racks and carriers, bike racks and a hitch mount for an earlier vehicle, I have always been happy with their excellent service and follow up. I have highly recommended them to my friends.
Purchased 3 items from etrailer (Swagman-S64650, Hitch -24902, Anit-Rattle Lock -S64029)- Product review below etrailer review (both get similar star rating)
Decided to use etrailer based in their support videos and upfront information. For example: on some products I reviewed they provided (in the title info ) Class I or II. For other retailers you had to dig deep into description. Being a novice at the ratings it not only educated but prevented incorrect part ordering.
I will not hesitate to use etrailer based on the above and AFTER the purchase support
First time DIY on hitch. Mounted on 2013 Hyundai Elantra
Provided video was extremely careful. It took me probably 2x time install than normal as I like to "test" assembly (measure x times, assemble once to borrow a phrase). Except for reconnecting exhaust (use car jack) entire assembly was done "on the ground". Most difficult part of entire process was dis-assembly/assembly of rear exhaust mounting rubber. While the video starts showing lower "attachment" to be removed it switches to the top one. Took me a few times to catch this. Use of WD-40 or x lubricant is strongly suggested.
Hitch mounts as advertised.
No surprises to fit/finish. Mounted Swagman-S64650 without any issues
My Elantra has appearance panel (driver side rear) that needed trimming. Did not use overall area to trim but rather (trial and error) cut out just enough for a tighter fit (pic included)
I installed the hitch receiver this morning. The installation was on a 2016 Hyundai Elantra. The staff at etrailer assured me that the 24902 would fit even though there was no data for a 2016 Hyundai listed on their website. Once again they were right. It fit perfectly!
I did receive the hitch without the mounting hardware. A quick call to etrailer and the hardware was in the mail immediately and was received a few days later.
One comment about the instructions. Figure 3 shows the dimensions for the cut out required in the under-body trim panel. The dimensions are referenced to a screw hole in the panel which is used to fasten the panel to the rear bumper. That screw hole is not there in the 2016 model. I've included a photo to show where I made my cuts, a photo of the panel mounted on the vehicle with the hitch receiver in place and a photo showing the appearance of the hitch from the back of the car.
I am very satisfied with the product and the support from etrailer. This is my 2nd great purchase from the company.
Was easy to install by myself with just a floor jack and safety stands. The instructions provided were clear and even explain how to cut the protective cover under the car to fit over the hitch support. Most hitches i have seen attach at 2 points, this one attaches at 3 points and utilizes the oem tow loop in the center of the car, which i think makes it much more stable, especially when used with a bike rack which puts a lot of tongue weight on the hitch. The hitch is barely visible from the back of the car.
Seems very solid and installation took about an hour. Did have to cut a small portion of the heat shield away but that was pretty easy. Although easier with two people I did it by myself so it can be done by yourself. 2016 Hyundai Elantra Sport. I added a Curt bracket for the 4 pin harness for a cleanerlook.
This hitch fit perfectly on my 2015 Hyundai Elantra. It was a easy to install using the video instructions. After 1 year of use the hitch has held up very well with about 8k miles of pulling a 4' x 8' trailer hauling my dual sport motorcycle.
The hitch install went as expected and you definitely need a second person to help hold it in place. I'd recommend increasing the bolt hole size by a 1/16th on the frame. This will make the bolt with fish wire easier to get into place. The Inno Aero bike rack works great as well
Looks great on my car and not an eyesore. Had someone else install it because I had no place to do it. Satisfied with the hitch and already purchased a cargo trailer to pull behind my car..
Awesome hitch!
Installed this on my 2016 Hyundai Elantra so I can carry my bicycles on my hitch mount Saris bones rack. Instructions were clear, install took me about 30 minutes with a few tools and a floor jack.
I know jack **** about installing on cars but this has to have been the easiest thing ever. Installed on my 2014 Hyundai Elantra and got a 5x8 trailer. Have been moving easily ever since. Thank you E TRAILER!!
Excellent hitch for my Hyundai 2011 Elantra.
I had my service mechanic put it on - cost me $50.00 but saved me the time. I know it was done right. It looked easy but had a hard time getting the exhaust rubber holders loose.
Looks great.
I love my hitch to haul our bikes! It saved me from having to buy a truck, It fits perfectly on my 2013 Hyundai Elantra! Highly recommend!
Easy to install. Package was delivered quickly. It took me 40 min to install and clean up. Not bad for a complete beginner.
Eric
2/11/2019
The hitch is great and so was e-trailer. You certainly will see more business from me in the future. I am very glad I made the purchase.
2014 Hyundai Elantra Sport. This had a really great result when it was all over!
Hyundai doesn't make the model designation for the Sport model easy to figure out. In common automobile descriptions a "Coupe" is a 2 door car. In Hyundai Elantras the Sport model is a 4 door vehicle that Hundai calls a Sport Coupe.
Take the plastic panel off the drivers side of the car as discussed in the installation instructions. It is held on by 4 plastic holders and 4 10mm nuts. I would NOT recommend discarding this panel. It covers a deep area that can fill with snow and mud beneath the car and could lead to rust if you leave it off. Be careful when cutting the panel. The instructions call for a slot that is much larger than necessary. I suggest making this cut the last step as you finish the installation.
The Elantra Sport is made in Korea so you'll want to stop at Menards to get a decent drill bit and drill out the frame holes as stated in the instructions.
You will NOT need to loosen the exhaust to finish the work on this year make and model. :)
You might consider trimming away the aluminum heat shield that would be between the hitch and the frame so the hitch and frame will be in full contact. The total amount removed is about an inch wide and maybe six inches long. It's easy to do with tin snips. A 10mm wrench will release part of the heat shield to make it easier to clip the shield. I did not trim off the area around the 10mm nut which holds the shield to the frame.
I was pleasantly surprised to see that the muffler on the Sport does not come near the hitch.
You DO want to use the Coupe holes on the hitch, NOT the Sedan holes. The hitch has both sets of holes already drilled for you.
Start by loosely securing the center fastener that connects the hitch to the towing loop at the center of the rear of the car. Be sure you use the right size nut and bolt combination. The other two nuts and bolts will be different from this center bolt and they will match each other. Check the installation instructions for more information about the nut and bolt sizes.
The fish wires are easy to work with. You SHOULD NOT tighten either side fully until you have nuts and bolts in place in all 3 locations (left, center and right).
Be sure to follow the torque settings in the instructions. The center bolt has a different torque value than the right and left bolts.
Final outcome: easier than I expected, cleaner installation than I expected and a perfect fit.
One other note: Big iron like this can arrive with chips and scrapes. You might want to get some decent RustOleum black spray paint for about $5 and paint over any scrapes or scratches before mounting it. It's worth your time to do this.
Jim M.
7/14/2020
Its been a year. I live in cold, snowy, salty Minnesota and I dont see the early rust that is so common on hitches. I think its because I touched up the hitch with some decent paint before mounting it.
Was very easy to install and fits great.
Elantra 2015 install. Hardest part was dropping the exhaust from the car as the rubber hangers were tough. Total install time 20 minutes. Once drivers side cover plate was off, we fished the bolts just like the video showed. Then we aligned the center bolt and attached. This made working each side easier because the bar was already in place since we were on the ground with limited room and not jacked in the air. Bolts tightened with torque wrench quickly. Cutting the cover plate was easier using a band saw we had handy but the utility knife would have worked too with just a little more time.
Ella R.
4/30/2018
Not only are they awesome my second time purchasing as I bought a new car and needed a new hitch bar I highly recommended you guys to people on Reddit home improvement sub! A lot a people didn’t realize how easy it is to install a hitch onto a car and pull a tag along trailer for east home improvement stuff pick ups. So many were thinking they’d need to purchase a truck just to haul things. I recommended your site because if it’s easy to use ordering and videos to watch the simple installs. Thank you for your company and it’s great service!
Installation was very easy. I think disconnecting the exhaust hangars was probably the part that took the longest. After the exhaust is out of the way the rest of the installation is a breeze. With regard to the hitch, the only slight annoyance I have noticed is that when installing my Thule bike carrier and trying to tighten the bolt, there is little clearance between the chain loops on the bottom and the reinforcement plate on the top. That clearance only allows you to tighten the bolt about 1/8th of a turn or less at a time using the Thule flat wrench. If you use a ratchet and extension it wouldn't be a problem, but I typically only carry the Thule flat wrench that came with the bike carrier.
Patrick B.
7/15/2014
We run into this quite often, and it happens with any bike rack that uses an anti-rattle bolt to secure. The solution that we use is a ratchet and the correct size socket. You can tighten and loosen faster with a ratchet and it gives you a bit more clearance around the chain loops. Those of us that regularly use hitch bike racks like this keep an extra ratchet and socket in the trunk or cargo area.
Do you have a question about this Trailer Hitch?
Info for this part was:
At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Scott G.
3/25/2021
The hitch has worked perfectly. I never have to think about it which is what I want in a hitch. A year later, Im still 100 happy with my purchase.