To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
This Curt Trailer Hitch Receiver is built for real-world hauling with a Class III rating, 6,000 lbs maximum gross trailer weight, and 900 lbs tongue weight. When used with weight distribution, it handles up to 8,000 lbs GTW and 900 lbs WD TW. The 2" x 2" receiver opening is the most common size for hitch-mounted accessories, making it easy to use with your existing ball mounts, bike racks, or cargo carriers. Whether you’re pulling a small camper or a utility trailer, this hitch delivers solid performance every time.
The hitch is made from fully welded steel for maximum strength and durability. A gloss black powder coat finish is layered over a protective base coat for superior rust resistance. This finish helps the round-tube design keep its clean look even after miles of towing and exposure to the elements. With precision, robotic welding, every joint lines up tight for a consistent fit and long-lasting reliability.
Installation doesn’t need to be complicated. This hitch bolts directly to the frame using existing hardware—no drilling or welding required. The design lines up with factory mounting points for a smooth fit that saves time in the driveway or garage. Once installed, the concealed cross tube keeps the visible part of the hitch looking tidy under the bumper while maintaining full towing strength where it counts.
Customer Satisfaction Score:
98% were satisfied with this product
2% of customers were not satisfied
Ratings & Reviews
I have used my trailer hitch several times with no problems and am happy with the ease of attaching and reliability while pulling trailers or attaching bike rack.
Excellent product at a good price along with free fast shipping make this deal hard to beat.
A installation video along with printed instructions really helped.
Would I recommend etrailer? I bought a light package to go along with the hitch today.
And because of the competitive prices along with excellent customer service, I will , in the future, shop here again!
etrailer Team, The installation was a little hard since I am by my own and working on the floor, but the outcome is great, the same with the electric installation, easy and simple; I believe that the quality is more than good because the difference of weight in between the original and the etrailer hitch is big. In my case I am going to use it with light weight stuff.
I have the z71 Colorado with tow mode and the bigger v6 so that helps but it’s still only a mid sized truck and I’ve pulled things iSight at the upper edge of my weight limit for pullling and this hitch has never made a noise never scared me everything was me proof for putting not in I have mechanical background but I banged my head pretty good in the service so it’s easy to install. Overall absolutely satisfied with the whole experience from buying to performance. I Recommend this product highly recommend to anyone needing a hitch.
SHIPPED TO MY DOOR QUICKLY, VERY HAPPY WITH THE CONSTRUCTION AND EASE OF INSTALATION.
The install was what I expected, about two hours, but I took my time. I hung the bumper with a pair of cargo straps so I didn't have to manhandle it at all. I did cut some pieces off the old cross member to act as shims to fill in between the bumper mount and the frame since the hitch attached outside it all. Been very happy with it.
Hitch looks good and is functional. Hardest part was breaking the factory mounted bolts loose. I had to get a breaker bar. Also the Factory Crossmember has "vertical wings" where it mounts to the side of frame and the hitch does not. I had to get some large washers to re-install the bumper in order to adjust for the lack of "wings". I got this in order to mount a bicycle rack. It saves me from putting several bikes in the bed when we go to a different location
Awesome Hitch, it was easy to install on my Colorado and has been put to the test. I regularly tow either a Bayliner 175, two dirt bikes and a quad on a utility trailer, or a hitch mounted dirt bike carrier and have had no issues. I have used the receiver as an anchor point to self recover my vehicle and it held up just fine doing that too.
This trailer hitch was easy to install - great directions and video also available on YouTube.
The hitch was easy to install and fits perfectly. No problems with the instructions as they are easy to understand. High Quality and well built. Used for trailers and a bike rack.
Robert
1/22/2020
Still going strong! have used several times with no issues at all.
Great products and fast shipping,excellent service!
Hitch is well made, but has a problem. You have to remove factory support that goes between frame and mounting bolts. This leaves the hitch approx. 1/8 inch to wide on each side. I corrected this by shimming with large diameter washers. Hitch should be approx 1/4 inch narrow. If you install it with out spacers, you will have to really tighten it in order to bend the mounting brackets flat against the frame.
Thomas M.
1/5/2022
The factory support is actually reinstalled after the hitch is installed. The hitch mounts to the frame and there shouldnt be any need for the washers. I am attaching a link to an installation video.
Install was normal with no issues. Hardest part was breaking the OEM install loose.
I am a repeat customer with etrailer. They've always had what I was looking for at excellent price points. And excellent customer service. No complaints here.
Great company to work with,shipping was very fast
Perfect fit for our truck!
Everything matched up perfectly! The video for the truck to Hopkins trailer wiring was flawless. Would definitely recommend to everyone to use etrailer!
Victoria H.
4/1/2025
Thanks Stephen, we appreciate your recommendation! I'm glad everything came together seamlessly for you and our install videos came in handy for you as well! Towing anything fun?
Trailer hitch went on with out to much trouble always great product and service
Thanks
WORKS GREAT NO ISSUES AT ALL USE IT FOR HAULING SMALL TRAILERS, PORTABLE BBQ, AND MY MOUNTAIN BIKES
Well made, good fit. Looks good too—it’s mostly concealed behind the bumper. Be sure to put spare tire plate in position early on, while hitch is still loose enough to allow wiggle room. The instructions make reference to this.
Awesome. Great price fast shipping such an easy install. Whole process including wiring took me 1.5 hrs. And I’m not at all a mechanic. The video was a tremendous help by watching before I started. Highly recommend this product. And etrailer
I received this hitch much earlier than expected.....great shipping....My son and I took on this project today.....I'm 67 and my son is 28....you will need some young muscle....lol....we are just DIY people......we watched the vids and we had no problem....our problem was we were just using hand tools.....breaker bars and ratchets.....this is labor intensive with hand tools, but not bad...just be ready to take a break......our only problem was the spare tire bar......DO lower the spare and loosen all the bolts .......we did have to manipulate the bumper to get all the bolts to line up but wasn't much of a problem.....they say DIY should take about 1 hour or more....we did it in and hour and a half....and we took a break in between to hydrate....I'm in deep S. Texas....all in all....pretty easy peasy with the right tools and at least two guys.
Installed my new hitch this morning, wasn't too hard to do. Impact wrench to remove the 4 bolts facing the floor, and a breaker bar and ratchet handle to remove the side bumper bolts. Got a couple extra hands to hold the bumper in place so I could remove the bolts and removed the bumper hitch. This hitch doesn't utilize the side bumper bolts so I reinstalled them and got the new hitch inlace and started the 4 bolts. I must say, it is a heavy duty well built hitch, much heavier that the one I removed. Snugged up all 8 bolts and torqued them to 126 Lb Ft.
It a nice hitch but took 3 guys, 3 hrs to install. Getting the new one bolted on to the frame was the easy part. Getting the existing bumper, ball & hitch frame support off, to have room to install this new CURT hitch, was the big time sucker! If you don’t have to deal with that you’ll still need three guys as someone needs to be on the ground on each side, plus someone to run the jack (to support the bumper) and be a gopher for you. 21mm socket isn’t common and you’ll need some long extensions with a breaker bar.
Tom
7/30/2026
Works great. Very happy with this in the Colorado pickup. Easy install but had to have 3 of us to do it right. 3 old dudes so just have some help.
Kate F.
7/30/2026
Do you have a question about this Trailer Hitch?
Info for this part was:
At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Katrina
8/10/2022
We use our hitch almost every weekend and it works awesome!!! Love it