bing tracking image
  1. Vehicle Heaters
  2. Zerostart
  3. Engine Block Heater
  4. Cartridge Style
  5. 120 Volts
  6. 400 - 599 Watts
THIS ITEM IS NOT A FIT FOR
1954 Cadillac Series 75
Zerostart

Zerostart Custom Fit Engine Block Heater - Cartridge Style - 120V - 400 Watts

Part Number: ZE47KR
In Stock
$135.42
Retail:$169.27
You Save: $33.85
Vehicle Heaters
Not Confirmed to Fit

1954 Cadillac Series 75

Will this fit?

To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.

zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.
By submitting this form, you understand and agree to our Terms of Sale, Website Terms of Use and Privacy Policy.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

Need help with installation?
Locate installers near me
Your car spent the night in subzero cold, but you still need to get moving. This Zerostart cartridge heater warms the engine block before startup, easing cold-start strain without the messy install of an immersion heater. Great Prices for the best vehicle heaters from Zerostart. Zerostart Custom Fit Engine Block Heater - Cartridge Style - 120V - 400 Watts part number ZE47KR can be ordered online at etrailer.com or call 1-800-940-8924 for expert service.
  • All Info
  • Q & A (0)
  • Videos (2)
  • Photos

Zerostart Vehicle Heaters - ZE47KR

  • Engine Block Heater
  • Cartridge Style
  • 120 Volts
  • Zerostart
  • 400 - 599 Watts

Your car spent the night in subzero cold, but you still need to get moving. This Zerostart cartridge heater warms the engine block before startup, easing cold-start strain without the messy install of an immersion heater.


Highlights

  • Easier Starts in Deep Cold: Preheats the engine block when subzero weather makes starting harder.
  • No Coolant Draining Required: Dry cartridge installs without removing freeze plugs or coolant.
  • Cold-Weather Thermostat: Cord activates the heater at 0F (-18C) for GM-compatible operation.
  • Made for Select V6 Engines: Fits listed GM-family and Suzuki applications with a matching cavity.
  • 400 Watts of Preheating: Uses 120V power to warm engine metal before the day's first drive.
  • Removable 5' Silicone Cord: Routes to an accessible spot; protective cap shields the plug prongs.

Features to know about

Make Starting Easier When Temperatures Drop Below Zero

Your vehicle has been sitting outside through a bitterly cold night, but you still need to get to work, take the kids to school, or head out for the day. At those temperatures, a cold engine can be harder to start, and thickened oil adds to the strain. This 400-watt Zerostart cartridge heater warms the engine block before you turn the key, reducing cold-start strain and helping the engine reach operating temperature sooner. It's a practical way to get your vehicle ready for the coldest mornings.

Install the Heater Without Draining Coolant

Unlike a freeze-plug or threaded immersion heater, this cartridge doesn't sit directly in your engine's coolant. Instead, it slides into a dedicated dry cavity in the engine block, transferring heat through the surrounding metal. You won't need to drain coolant or remove a freeze plug, which takes some of the mess and extra work out of installation.


This heater fits select V6 engines used in Chevrolet, GMC, Buick, Cadillac, Pontiac, Saturn, and Suzuki vehicles. The installation location varies, with some engines using a left-rear cavity and others a right-rear cavity. Check your vehicle's fit information and the manufacturer's application catalog before getting started. Once you locate the correct opening, clean away debris, seat the cartridge properly, and secure it according to the installation instructions. There's no need to modify the heater or engine to make it fit.

Understand Why Your Heater Only Turns On in Extreme Cold

You might plug in your heater on a 20-degree morning and wonder why the engine isn't getting warmer. For compatible GM applications, the thermostat-controlled power cord is designed to activate the heater at approximately 0F (-18C). That's intentional, not necessarily a sign that something is wrong. Once temperatures get that cold, the thermostat allows power to reach the heating element and warm the engine block before startup.


The thermostat also serves an important purpose beyond controlling heat. On affected GM vehicles, using a cord without the proper thermostat can trigger a Check Engine Light because the engine computer may detect an unexpected difference between engine and outside temperatures. Phillips & Temro specifies thermostat-controlled cord 3600082 for this heater. If the cord needs replacing, be sure to use the correct thermostatic replacement rather than substituting a standard cord.

Keep the Power Connection Handy

The included 5' silicone cord can be routed toward the front grille or another accessible location, so you don't have to open the hood every time you plug in. Secure it away from hot surfaces, sharp edges, and moving engine parts, leaving enough slack for engine vibration. The protective cap keeps dirt and debris away from the plug prongs when the cord isn't in use.

Know Who Makes Your Zerostart Heater

Zerostart is a Phillips & Temro brand. You might recognize Phillips & Temro from factory engine-heating applications even if the Zerostart name is unfamiliar. The company develops heaters for original-equipment and aftermarket applications, including cartridge heaters made for specific engines. That experience is useful when choosing a heater that needs to fit properly and work with your vehicle's electrical and engine-management systems.

Important Notes:

1. Installation and Fit

This heater installs in a designated dry cavity in the engine block. No coolant draining or freeze-plug removal is required. Confirm the correct location for your specific engine before beginning. Make sure the opening is clean and free of debris, then install and secure the cartridge according to the manufacturer's instructions. Never force or modify the cartridge to fit an incorrect opening.


2. Thermostat-Controlled Power Cord

The specified thermostat-controlled cord activates the heater at approximately 0F (-18C). It may not provide heat at temperatures above this point. Phillips & Temro specifies cord 3600082 for compatible GM applications and warns that using a non-thermostatic cord can trigger a Check Engine Light. Do not bypass or remove the thermostat.


3. Testing and Safe Operation

Never plug in the cartridge before it has been properly installed in the engine block. The heater depends on contact with the surrounding metal to transfer heat safely, and operating it outside the cavity can cause overheating or burns. Connect the heater to a properly grounded 120V outlet. If you need an extension cord, use a grounded 3-wire cord rated for outdoor use and the electrical load. Always unplug the heater before starting the engine.


4. Disconnecting the Power Cord

When disconnecting the heater from an extension cord, firmly grasp each plug and pull them apart. Never yank on the cords themselves. This can damage electrical connections and lead to malfunction or a short. Replace a damaged cord with the correct thermostatically controlled replacement.

Specs

Application and Installation:

  • Heater type: dry cartridge engine block heater
  • Application: select GM-family and Suzuki V6 engines
  • Installation location: varies by engine; includes left-rear and right-rear locations
  • Coolant draining required: no
  • Manufacturer part number: 3100110

Electrical and Power Cord:

  • Voltage: 120V
  • Wattage: 400W
  • Amperage: 3.33A
  • Included cord: 5' removable silicone power cord
  • Power cord type: thermostat-controlled
  • Thermostat activation temperature: 0F (-18C)
  • Replacement cord: Zerostart 3600082 (sold separately)
  • Power plug: protective cap included

Warranty & Certification:

  • 1-Year limited
  • cCSAus approved


3100110 Zero Start Custom Fit Engine Block Heater - Cartridge Style - 120 Volts - 400 Watts

Installation Details ZE47KR Installation instructionsAlternate Instructions ZE47KR Installation instructions

This Product Fits The Following Vehicles




Video of Zerostart Custom Fit Engine Block Heater - Cartridge Style - 120V - 400 Watts
Video Thumbnail Video Player Dialog

Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.




Video Transcript for Review of Zerostart Vehicle Heaters - Custom Fit Cartridge Style Engine Block Heater - ZE47KR

Hi, everybody, Andy here with etrailer. Let's take a quick look at this Zerostart custom-fit, cartridge-style engine block heater. Now, this is designed to make cold weather starts easier and better for your engine. This is going to gently pre-warm your engine, so when you turn the key, it's going to start right up, even in freezing temperatures. That warmup also is gonna help protect your engine by reducing extra wear and strain that normally happens during cold, dry starts in harsh weather. Now, this is made for specific vehicle fits, so it is vital that you take advantage of our Vehicle Fit Guide here at etrailer.

Simply input the year, make, and model of your vehicle and answer any other questions that it might have for you, and our Fit Guide will confirm if this will work for you or if we have something comparable that will work for you. So because this is custom-fit, you're not gonna be dealing with guesswork or universal parts that may or may not work. The design is purpose-built for your engine, which keeps compatibility simple and reliable. Now, in terms of performance, this is gonna give you 400 watts of consistent heating power on a standard 120-volt outlet. That's gonna keep your engine coolant warm and ready to go.

It also comes with this durable five-foot silicone power cord that's built to handle tough conditions. The cord can be removed when it's not in use. Or if for whatever reason, this cord get damaged, you're not gonna have to replace the entire heater. You can just replace the cord and be on your way. If you also notice, something I really like and I see this on most, if not all, Zerostart block heaters similar to this, is it does have a cap for the outlet or for the plug here that goes into the 120 outlet.

So when this is not in use, you got a cap there to cover up those prongs and it'll be nice and protected. So I'm a big fan of that. So again, installation's gonna depend on your vehicle. If you happen to have any other questions, though, about this or anything else that we have here at etrailer, don't hesitate to reach out. We wanna make sure that you're getting exactly what you need.

Well again, my name is Andy. Thank you for joining me.

Ratings & Reviews

No reviews

5 Stars
(0)
4 Stars
(0)
3 Stars
(0)
2 Stars
(0)
1 Star
(0)
Review Sort Icon
0
0
true

See what our Experts say about this Zerostart Vehicle Heaters


Info for this part was:

Employee Daron K
Updated by:
Daron K
Employee Dawn Z
Updated by:
Dawn Z
Employee Alex H
Written by:
Alex H
Employee John S
Video Edited:
John S
Employee Andy C
Installed by:
Andy C
Employee Anthony G
Edited by:
Anthony G

At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.