Walking up to a stationary tank, you don't want to guess which nozzle is for auto unleaded. This 115V AC pump includes a red-covered manual nozzle and a 12' 3/4" hose, and delivers 15 gallons per minute. Grab the marked handle and fuel.
Grabbing the wrong nozzle at the tank is an easy mistake when everything looks the same. This kit includes a cast aluminum manual nozzle with a red plastic covering to indicate use for auto unleaded fuel. The plastic nozzle boot attaches to the pump body, so the nozzle stays parked at the pump between fills instead of getting set down wherever. You walk up, grab the marked nozzle, and start fueling without guessing which handle you're holding.
Buying a pump and then chasing down hose and nozzle parts turns a quick install into multiple trips. This pump includes 12' of 3/4" hose with static ground wire and the manual nozzle, so the dispensing side is already covered. The hose length gives you working room around the tank without stretching the line tight. You connect the hose, pull to the tank you're filling, and keep the setup contained to one spot.
Fueling off a fixed tank gets complicated when the power setup is temporary or hard to route. This unit is powered by a 115V AC motor and targets stationary, above-ground tanks with a nearby 115V AC power source. The adjustable electrical junction box rotates 180 degrees, so you can position the wiring to match how the pump sits on the tank. You route the power connection where it fits and keep the install tight and predictable.
A pickup tube that's too short leaves fuel behind, and one that bottoms out can be a headache to set up. This kit includes a telescoping steel suction pipe that extends from 20 inches to 34-1/2 inches, so you can set the length to match the tank or drum depth you're working with. Once it's adjusted, it sits at the depth you set without a cut-to-fit workaround. You pull fuel from the height you need and keep the transfer consistent from start to finish.
Inconsistent pumping turns a basic fill into babysitting the nozzle and watching the tank like a hawk. This pump uses reliable rotary vane pump technology and delivers 15 GPM, so fuel moves at a steady pace. The on-off switch lever with metal stopping arm is built for repeated cycles when you're fueling day after day. You flip the lever, fuel moves, and you shut it down cleanly when the tank's topped off.
Do you have a question about this Fuel Transfer Pump?
Info for this part was:
At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.