Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
This rope ring tie-down is great for anchoring your ATV, generator or other heavy object to the E track or X track in your enclosed trailer. Perfect for use with rope, bungees or straps. 6,000 lbs Max load.
Features:
Specs:
Note: Tie-down anchors must be chosen according to their safe working load limit (WLL). The weight of the secured cargo must not exceed the combined WLL of the anchors being used. For example, if you are using anchors with a WLL of 100 lbs each to tie down a load weighing 400 lbs, then you need at least 4 anchors to safely secure that load. It is recommended that you always use anchors in pairs.
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Today, we're going to be taking a look at the CargoSmart Rope Ring and tie-down for E-track and X-track systems with a 2000 pounds safe working load limit, the part number is 3481767. Now this rope loop and tie down is going to come in handy for all applications, but especially in the heavy duty applications. This offers a 2000 pound safe working load limit. That's going to be a lot higher than what we see out of most tie-downs like this. It has heavy duty steel construction. That way we can ensure that it's going to last a very long time.
We'll take a closer look at that in a minute. And we also have the white zinc coating. So whether you're using it inside or outside a trailer, it's going to last for a very long time.Now, overall, from outside to outside of our ring, we've got about two inches there. Then the usable portion on the inside, it's going to be about an inch and a half. Now, just by holding it, you can tell there's a significant quality difference in this design versus some of the other ones that we're used to.
You can see with this, we've just got a single stamped piece of steel that goes down and around. That creates our loop. With the one from CargoSmart, you can see this is layered, just like a master lock is, where you get the layers of plate steel. Then those are going to be riveted together. This is going to give us superior strength and that's what's going to allow us to get up to that 2000 pounds safe working load limit.
So to get it installed, we pull up on that. We want that larger side to go in first, the backside comes down and then we just pull it rearward. It's going to click into place.Now in our application today, we're using this as a tie-down point. So we're going to be using straps. You see there's a nice large opening there.
So whether you're using straps or using it as a rope tie-down, you're going to have more than enough room to get that ran through there. Even several times, if you're using the rope. These can also be used to redirect rope. So you can put it on the side, the floor, just about anywhere you want. You can run your rope around an item through that, and then back to tie it off. So, really great as a tie-down point, like we're using it here. Or also as a lashing point for rope. And that'll complete our look at the CargoSmart Rope Ring and tie-down, part number 3481767.
Customer Satisfaction Score:
99% were satisfied with this product
1% of customers were not satisfied
Ratings & Reviews
Mark
3/13/2021
working great,the xtrack gives you more options when tying down atvs and other gear
Do you have a question about this E Track?
Info for this part was:
At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Chris
1/27/2021
Still working as expected. Thanks for continuing to make great products.