T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector
Item # 118810
Retail:$107.24
Our Price: $76.59
You Save: 29%
Confirmed to Fit
2020 Toyota Corolla
Sedan
Will this fit?
To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
Orders above $99 qualify for Free Shipping
In Stock
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
- All Info
- Reviews (15)
- Q & A (0)
- Photos
2020 Toyota Corolla - T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector
- Trailer Hitch Wiring
- 4 Flat
- Powered Converter
- Tekonsha
Quickly and easily install a 4-way trailer connector on your Toyota Corolla with this custom wiring harness. T-One connector plugs directly into existing wiring. Powered ModuLite reduces strain on wiring system.
Features:
- Provides a 4-way flat trailer connector at the back of your vehicle to power your trailer's signal lights
- Compatible with 5-pole, 6-pole and 7-pole adapters (sold separately)
- Connects quickly and easily
- Locate connection points in rear cargo area
- Plug in T-connector
- Run hot lead to car battery
- Includes ModuLite to ensure that your vehicle's wiring matches that of your trailer
- Powered module connects directly to battery to avoid overloading vehicle's electrical system
- Constructed of 16-gauge bonded wire
- Comes with dust cap for 4-way flat connector
Specs:
- Maximum amperage:
- Stop/turn lights: 5 amps per circuit
- Tail lights: 7.5 amps per circuit
- 1-Year limited warranty
Installation
This custom-fit T-One connector plugs into your vehicle's wiring harness, which is located behind the driver's-side and passenger's-side tail lights. You will have to remove the rear threshold plate and felt trunk liner to access this harness.
Once you've plugged in the T-connector, run the hot lead up to your car battery. Connect the lead to the included fuse holder, and then connect the fuse holder to the positive terminal on your battery and insert the provided fuse.
Once installation is complete, the 4-way flat connector will be stowed in your rear cargo area.
It is recommended that you use a small amount of grease on all electrical connections - the plugs on your automobile and the 4-pole connector itself - to help prevent corrosion.
ModuLite Powered Tail Light Converter
A ModuLite power module is built into this T-One connector. Because most trailers run on a two-wire system - wherein the brake and turn signals are carried on one wire - the separate brake and turn signals from your vehicle's three-wire system need to be combined so they are compatible with the wiring system of your trailer. This power module functions as a tail light converter to combine the brake and turn signal functions of your automobile so that they run on one wire to properly activate your trailer's tail lights. Note: This will not affect how the tail lights on your vehicle operate.
With a ModuLite, your trailer's lights will be powered without overloading your vehicle's electrical system. Because the module draws power directly from your car's battery and bypasses the electrical routes that are used by a basic wiring harness, there is virtually no draw on your tail light circuits.
118810 Tow Ready T-1 T-Connector - 4 Wire - Modu-Lite
Installation Details
California residents: click here
Customer Satisfaction Score:
95% were satisfied with this product
5% of customers were not satisfied
- Product did not meet expectations
- Did not fit
- Wrong item was ordered
Customer Reviews
T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector - 118810
Average Customer Rating: 4.9 out of 5 stars (15 Customer Reviews)
Quickly and easily install a 4-way trailer connector on your vehicle with this custom wiring harness. T-One connector plugs directly into existing wiring. Powered ModuLite reduces strain on wiring system.by: AJ05/05/2024
After a year, and 1,000 mile journey from Florida to Texas, everything still works great for my Corolla. Will definitely be a go-to in the future.
by: Jody05/12/2023
The auto parts store gave me the wrong harness two times, then said that there was no aftermarket one available, that I’d have to get one from the Toyota dealership. With a little googling, I found this one from etrailer, ordered it and it was the right one. Quick shipping too!!
by: William D10/19/2020
2012 Toyota Corolla
the kit was fine, the work came in trying to get under vehicle to run the 12 volt line to the rear of car, the 2020 corolla is so low too the ground, I soldered the connections then used heat shrink to cover, the rest was easy
by: Pedro06/02/2022
Toyota Corolla
T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector from etrailer was a perfect fit. 2020 corolla toke it to a professional shop and they spent more time routin the wires then the actually electrical connections. customer for life. Thanks etrailer
by: Sean 06/05/2021
Sean
6/6/2022
One year later, still working great!
by: John 08/19/2022
2021 Toyota Corolla
Your tracking is the best
by: Yunior06/26/2021
Really good product and it fit perfect
by: Brian 02/06/2024
by: Steven 09/12/2021
Nice
by: 11/19/2023
2024 Toyota Corolla
by: Lukas11/24/2020
Good peoples Good products.
outstanding work!!
by: Reinaldo05/26/2023
by: Edgardo09/26/2022
by: Robert 09/06/2022
by: Adelky10/02/2021
15
15
See what our Experts say about this Tekonsha Custom Fit Vehicle Wiring
- Recommended Hitch Receiver For 2022 Toyota Corolla Sedan HybridI suggest the Curt Trailer Hitch Receiver, # C34UR that fits all models of the 2022 Toyota Corolla Sedan including your Hybrid model. This hitch has is a 1-1/4" x 1-1/4" receiver with 200lb tongue weight rating and a 2000lb trailer weight rating. This is a great option for carrying a bike rack or a cargo carrier. If you need a great bike rack for your new 2022 Toyota Corolla Sedan Hybrid, I suggest the RockyMounts MonoRail Solo Bike Rack for 2 Bikes, # RKY10007-05, that fits both 1-1/4"...
view full answer... - Trailer Hitch and Towing Equipment Suggested for 2022 Toyota Corolla Per the owner's manual, Toyota doesn't recommend towing with the 2022 Corolla nor do they recommend installing a hitch. We can't recommend anything that contradicts the owner's manual, but many folks install a hitch anyway. If you decide to do so anyway and keep the weight you tow to a minimum, you could install the Curt # C34UR hitch and use a lightweight utility trailer like # K2MMT4X6. The trailer itself only weighs about 300 lbs, and I'd personally have no qualms using such a trailer...
view full answer... - Trailer Hitch Recommendation for 2022 Toyota CarollaBoth Draw-Tite ( # 24983) and Curt ( # C34UR) offer Class I hitches that will work on the 2022 Toyota Corolla sedan. Both hitches share the same capacity, are visually almost identical and would install in the same manner, so you could choose either without issue. I'd personally choose the Curt model, because Curt manufactures their hitches in the US. If you'll be doing some light duty towing with the hitch, you'll also need a # 118810 trailer wiring harness, a # C45221 ball...
view full answer... - Trailer Hitch Recommendation For 2020 Toyota Corolla I recommend Draw-Tite Sportframe Trailer Hitch Receiver part # 24983 for the 2020 Toyota Corolla Sedan. It is a Class I hitch with a 1-1/4" hitch opening so you would want to be sure your bike rack is compatible with a Class I hitch. I have attached a customer photo of the Draw-Tite with a bike rack attached. If you need wiring in the future, I recommend T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector part # 118810 which is a very reliable brand that is known to last.
view full answer...
- Trailer Hitch Fit for a 2020 Toyota CorollaWe actually do have a trailer hitch for your 2020 Toyota Corolla Sedan! It is the Class I Draw-Tite Sportframe Trailer Hitch Receiver # 24983 and it has a 1-1/4" hitch receiver. You did refer to this as a tow hitch so if you planned on using this trailer hitch for towing you also need some wiring and a ball mount kit. I recommend the Tekonsha T-One # 118810 for wiring because of how reliable it is and that it bypasses your OEM wiring so you know your vehicle is protected. For a ball mount...
view full answer... - Trailer Hitch Receiver for 2021 Toyota Corolla Sedan SEBoth the Draw-Tite Sportframe Trailer Hitch Receiver # 24983 and Curt Trailer Hitch Receiver # C34UR will fit all trims of the 2021 Toyota Corolla Sedan. I recommend using the Draw-Tite over the Curt receiver. The installation instructions for the Draw-Tite(linked below) show it being installed on a SE trim Corolla as well. I recommend installing the Tekonsha T-One Vehicle Wiring Harness # 118810 to give you a 4-way flat trailer lighting connection. This plug and play kit will plug into...
view full answer... - Trailer Hitch Receiver and 4-Way Vehicle Wiring Harness For a 2024 Toyota Corolla Hybrid SedanWhile we do have the Curt Trailer Hitch Receiver # C34UR which will fit your 2024 Toyota Corolla Hybrid sedan the installation instructions do not specifically call out specifics for the hybrid model. While we also have not had a hybrid version in our facility to perform an install video we have several reviews with images included of the install completed on hybrids. I recommend installing the 4-Way # 118810 when you install the receiver. This is needed should you need to tow a trailer...
view full answer... - How Much Can a 2020 Toyota Corolla TowThe Curt Trailer Hitch Receiver part # C34UR which is a fit for a 2020 Toyota Corolla has a 2,000 lb gross trailer weight rating which is the amount you can pull outward on the receiver with a trailer. That said, the owner's manual does trump this figure if lower or if even rated at all so you'll need to be sure to reference this ahead of time. Therefore, so long as you are under the capacity either of the hitch or vehicle then you won't have any issues. You will need the T-One Vehicle...
view full answer... - Trailer Hitch Receiver for 2020 Toyota Corolla LEThere is one trailer hitch receiver that is a fit for your 2020 Toyota Corolla LE sedan, which is the Draw-Tite Trailer Hitch Receiver # 24983. This hitch does require drilling a small hole in the frame in order to attach it, but there is no welding required. I have added a link below to the installation instructions for you to check out. Since you mentioned towing you will also need a wiring harness and ball mount, and the exact parts you need for your 2020 Toyota Corolla are the following: -...
view full answer... - Does Draw Tite Hitch Fit 2020 Toyota Corolla Hybrid SedanYes, the Draw Tite hitch part # 24983 has been confirmed as a fit for your 2020 Toyota Corolla Hybrid 4 door sedan LE! We checked with Draw Tite recently and they confirmed that the fit does include the hybrid models like what you have. For trailer wiring the kit you want is the Tekonsha part # 118810 which will install easily and has a very reliable converter box which means it will work well for a long time and be more resistant to trailer wiring shorts than other kits. The recommended...
view full answer... - Hitch and Wiring that Fits 2022 Toyota CorollaFor your 2022 Toyota Corolla we have the Curt hitch part # C34UR as a confirmed fit that would work great. If you needed trailer wiring then the Tekonsha kit part # 118810 is easy to install and very reliable.
view full answer... - Best Hitch for a 2020-2022 Toyota Corolla Sedan Including the Hybrid Yes, the Curt Class I Trailer Hitch Receiver item # C34UR is designed to fit a Toyota Corolla sedan from 2020 to 2022 including the Hybrid model. This hitch is custom fit and bolts directly to your Corolla with included hardware. I have linked an installation video and the instructions below. If you are in need of a wiring harness I recommend the Tekonsha T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector item # 118810. This custom-fit T-One connector plugs into your vehicle's...
view full answer... - Does The Curt Trailer Hitch Fit A 2022 Toyota CorollaYes, the Curt Trailer Hitch Receiver # C34UR will fit your 2022 Toyota Corolla. This class I hitch is capable of handling a maximum GTW of 2,000lbs, and has a maximum TW of 200lbs. If you need trailer wiring, I recommend the T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector # 118810. This kit is a super easy to install, plug and play harness that plugs directly into your vehicles factory wiring.
view full answer... - Recommended Trailer Hitch for 2021 Toyota Corolla LEWe do have hitches available for your 2021 Toyota Corolla LE. I recommend the Curt Trailer Hitch Receiver # C34UR. This Class I hitch has a 1-1/4" receiver with a gross towing weight of 2,000 lbs and tongue weight of 200 lbs. Make sure to consult your owner's manual to see what your towing capacity is before you do any towing. You will be limited by whatever capacity is lower, the vehicle or the hitch. Since you plan on towing a trailer, I also recommend the Tekonsha T-One Vehicle Wiring...
view full answer...
Do you have a question about this Custom Fit Vehicle Wiring?
Info for this part was:
Edited by:
Lindsey S
Installed by:
Kathleen M
Video Edited:
Chris R
Updated by:
Wilson B
Updated by:
Isabelle B
Written by:
Alexander C
Test Fit:
Shane H
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 1-800-940-8924
William D.
10/20/2021
Great, no problems