EZ Connector Custom Vehicle Wiring Harness w/ Magnetic 7-Way Trailer Connector

2008 Hummer H3 - EZ Connector Custom Vehicle Wiring Harness w/ Magnetic 7-Way Trailer Connector

Replace the existing 7-way on your Hummer H3 with this socket. Built-in magnet creates tight connection with EZ Connector trailer-end plug (sold separately). Face-to-face contacts mean no bent or broken terminals.

Features:

• 7-Way trailer connector installs at the back of your vehicle to power your trailer's signal lights
  • Compatible with 4-pin, 5-pin, and 6-pin EZ Connector adapters (sold separately)
• Powerful magnet in socket joins with magnet in EZ Connector trailer-end plug (sold separately) to keep connection secure
  • Plugs stay tightly connected, despite the bumps and vibrations common with towing
• Face-to-face electrical contacts - no pins or blades to bend or break
  • Eliminates concerns about electrical arcing and abraded pins
  • Contacts are easy to clean when necessary
• Ideal for marine applications
  • Silicon O-ring in socket creates a watertight seal when connected to keep out moisture and debris
  • Marine-grade wiring resists water damage
• Dummy plug inserts into socket when connector is not in use to protect contacts from dirt and debris
• Quick and easy installation - no cutting or splicing
  • Locate connection points behind rear bumper
  • Plug in connector
• Standard mounting bracket included
  • Adapter bracket (sold separately) also available
• Made in the USA

Specs:

• Wiring harness length: 2'
• Limited lifetime warranty

This vehicle-end trailer connector gives you the functionality of a 7-way, but without any pins or blades to bend or break. It's designed to work with a matching EZ Connector plug (sold separately) to create a secure, watertight connection that lasts. Strong magnets in both the plug and the socket keep the connection tight and secure, even when you're driving on rough terrain. Built-in O-rings on the dummy plug create a seal to keep out water and debris while the connector is not in use. And spring-loaded, face-to-face electrical contacts are long-lasting and easy to clean. These factors combine for a strong, durable connection that's easy to use and to maintain.

Magnetic Plugs Stay Connected

The EZ Connector system uses magnets inside the plug and socket to hold the connectors together. Simply insert the trailer-end plug (sold separately) into this vehicle-end socket and the internal magnets will snap them together, no latch needed. To disconnect, just pull the plug out by hand.

This is an improvement over typical trailer connectors, which rely on a plastic latch on the socket lid to hold the trailer plug in place. With any trailer connector it can be easy to forget to disconnect the wiring when you unhook your trailer. If you drive off without disconnecting a standard 7-way plug, the connector will get pulled out of the socket, likely tearing off the lid. Without a lid, the electrical terminals are exposed to damaging moisture and debris. But if you forget to remove the EZ Connector plug when unhooking your trailer, the plug will simply disconnect from the receptacle as you drive off.

The magnet inside of this trailer connector is made of neodymium, an extra-strong, rare-earth alloy. This high-quality magnet ensures a tight connection between the connectors that is stable enough to make it through intense bumps and road vibration.

Silicon O-Ring Creates Watertight Seal

The EZ Connector trailer-end plug (sold separately) has a double O-ring that will create a seal when it's inserted into this connector. When the socket is not in use, just insert the included dummy plug, which also has a double O-ring, into the connector. This ensures that the terminals on this vehicle-end socket stay protected from moisture and debris at all times.

All of the EZ Connector systems have earned a perfect score on the SAE water submersion test. This means that the seal created on this connector, either with the dummy plug or with the EZ Connector trailer-end plug, will stay watertight, even if the connector is completely submerged in water for extended periods of time.

No Pins or Blades to Bend or Break

This EZ Connector socket has spring-loaded, face-to-face electrical contacts instead of pins or blades. Pins and blades can bend, corrode, and even break off, which can lead to a permanently damaged connection. With the EZ Connector system, there are no pins or blades to bend or break. Because there are no pins or blades, there are also no pin sockets on the trailer-end plug (sold separately) that can trap debris. And if any dirt or debris does collect on the terminals of either end of an EZ Connector setup, it can be quickly and easily wiped away. No more scraping pins to get grime off. The result of all of this is a quality, effective connection every time you plug in.

R7-06 Easy Connector T-Connector with 7-Way, RV-Style Trailer Connector - Hummer H3 Side - 24" Long

Installation Details