Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Loose or corroded trailer plugs can ruin a trip. This EZ Connector uses powerful magnets and spring-loaded pins that hold the 7-way firmly together while keeping out dirt and moisture. The sealed magnetic design gives a solid connection every time you hook up.
Setting up the vehicle end is simple since it’s ready to splice into your existing wiring. The connector comes with a 2-foot harness that gives enough length to reach the mounting point without extra clutter. It’s a clean, easy way to wire a 7-way with no converter needed.
Whether you like a factory-style look or prefer the plug in the bumper, this connector fits both setups. You can drill a hole for a recessed fit or use the included bracket for surface mounting. Either way, it keeps the connector protected and easy to reach.
If you need more than the built-in 2' of harness, it’s easy to extend using compatible jacketed 7-wire cable like Deka Wire part # DW04914-1. That makes it simple to customize your wiring run for your vehicle or hitch layout without changing connectors.
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Speaker 1: Today we're going to take a look at the Easy Connector Vehicle and Magnetic Seven Way Trailer Connector with a built in seal. Now this seven way trailer connector will install at the back of your vehicle to power your trailer's signal lights. It is compatible with four pin, five pin, and six pin easy connector adapters that we do sell separately on our website. Now on this connector in the very middle is this powerful inaudible 00:00:20 magnet. It'll join with the magnet in the easy connector trailer end plug that we sell separately and it keeps the connection secure. The plugs stay tightly connected despite any bumps or vibrations that are common with towing.If you look on the inside here, there's seven flat face to face floating spring loaded electric contacts.
There's no pins or blades to bend or break. This eliminates the concern about electric arcing and inaudible 00:00:44 pins and the contacts are very easy to clean when necessary. This is ideal for marine applications. The marine grade wiring helps resist water damage. Very simple installation, you just hard wire this to your existing wiring.The dummy O ring seal plug right here, which is included.
This helps keep moisture and debris out of the socket. It also has a magnet on it and you can see when you get it closed, it'll automatically attach. To pull it apart it does take quite a bite of strength to pull it apart and that would be the same way with you trailer end connector when you go to plug it into here, it would be the same way, that magnet keeps it connected.Now the connector fits into the factory socket mounting location on most newer vehicles. They do include a standard mounting bracket and they do sell adapter brackets that are also available, we do sell those separately on our website. This part will include everything shown here, the vehicle side socket with the cable attached, the dummy O ring plug, the butt connectors to make your wire connections, heavy duty cable ties and inaudible 00:01:41 ring tubing, and a nice set of installation instructions.
This part is made it the USA and just to give you an idea the length on this . Cable length on this is about two feet long.But that should do it for the review on the easy connector vehicle and magnetic seven way trailer connector with the built in seal.
Customer Satisfaction Score:
98% were satisfied with this product
2% of customers were not satisfied
Ratings & Reviews
Have not installed yet but looks good
Worked great for my RV towing
wonderful product, should come standard on all new trucks, have them on both my trucks and all trailers
Always excellent service, delivery is quick and efficient. Products I've ordered have been top quality. I highly recommend these folks.
I haven't had a chance to install them but the product quality looks to be supreme!. Also the the entire ordering experience was great & it shipped the same day. Customer service was excellent. Thank you etrailer!!
This is a nice product. After one year, it still holds tight. Just remember to put the plug all the time to avoid dirt coming in. Use the dielectric grease on the plug side surface to avoid O ring becoming dry out.
The EZ Connector is a huge improvement over the standard type. In my experience it has one vulnerability - metal shavings. Keep the protective cover on when it's not in use and be careful when doing any grinding or drilling nearby.
After getting the wires correctly connected on the truck and automobile, this item works excellently. With the adapter for use with other trailers, I can tow other trailers.
I had struggled with poor connector mating and fit with the standard connector until I changed to the EZ Connector Magnetic system. It's like a trailer sized Apple Magsafe connector. Mating is instantaneous and rock solid. In a perfect world every trailer connector would be an EZ Connector. My only gripe is that the mounting bracket would not stick down as far as it does. If they offered a minimum height connector bracket as an option it would be nice for those of us pulling trailers with passenger car SUVs and not pickup trucks with way more ground clearance.
I installed an EZ connector on the rear of my RV and another on the front of my Jeep Wrangler. Now, when I tow the Jeep while RVing, I never have to worry about the taillights, brake-lights, or turn signals because EZ connectors are the most reliable trailer electrical connector period.
We have 6 trucks with this same Ez connector Magnetic 7-way connector, The ones that come on the trucks stock were always breaking and having loose connections and lights not working properly, since we started using these on our trucks back in 2009 we have not had an issue with them breaking or not working. Highly recommend these trailer plugs, it might be the last one you need to buy!
They had great service along the way as well, keeping me up to date through email about when the item was shipped with tracking info and even followed up with an email once delivered.
Aaron G.
10/13/2018
The Ez connector trailer plug is still working great, I think I mentioned in the review but we use these on all of our eight company trucks and we love them, we used to have a lot of problems with the old 7 pin hook up for the trailer lights and now we dont with the ez connector. Thanks for reaching out after a year.
This was one of the best decisions we have made, no more trailer fault codes, now to change the rest of the trailers over to the magnetic plugs!
Gwendolyn Y.
5/20/2025
That's awesome, Jake! It sounds like the new plug helped a lot with ease of mind.
This product is great! I have had dead batteries when I would show up at a campsite and ready to start the car to remove from the coach. All because of a loose connection at the car plug. Not anymore with this magnetic connection!
Info for this part was:
At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time.
Guy M.
5/12/2021
Excellent