See what our Experts say about this CURT Custom Fit Vehicle Wiring

• Recommended Hitch for a 1994 Ford E-350 Motorhome
  To add a class IV hitch to your 1994 Ford E-350, I recommend the Curt item # 14053. This hitch is custom fit and bolts to your motorhome with included hardware. It has a 2" receiver, a 10,000 lbs towing capacity, and a 1,000 lbs maximum tongue weight. I have linked an installation video below so you can see how to get this hitch set up. Here are some other parts you will need to tow a trailer with your motorhome: Wiring Harnesses - 4-Way - Curt T-Connector Vehicle Wiring Harness item...
  view full answer...
• Will The Curt Trailer Hitch Receiver C12232 Fit a 2001 Mercury Sable Station Wagon?
  Yes, the Curt Trailer Hitch Receiver # C12232 is compatible with your 2001 Mercury Sable station wagon as well as the sedans. This will only fit on models with the single passenger side exit exhaust. If you have a dual exhaust you will not be able to fit this receiver without modification to the exhaust. The Curt T-Connector Vehicle Wiring Harness # C55343 will give you a plug and play 4-way flat connector. This is what you will need to tow most small trailers or carry a hitch mounted...
  view full answer...
• Recommended Hitch for a 2001 Ford Escape
  The first year we have parts and hitches for Ford Escapes is 2001. They may have been released at the end of 2000 but the first model year in our system is 2001. I recommend the Curt Trailer Hitch item # C13506. The Curt Hitch item # C13506 is a class III hitch with a 2" receiver. It has a 3,500 lbs towing capacity and a 350 lbs maximum tongue weight that can be increased to 5,000 lbs and 500 lbs when used with a weight distribution hitch. This hitch is made in the USA and weighs 31 lbs. If...
  view full answer...
• Can a Trailer Hitch Be Installed on a 1997 Mercury Sable by a Mechanic
  I recommend the Curt Class II 1-1/4 Inch Hitch, part # C12232, for your 1997 Mercury Sable. This hitch has a maximum gross trailer weight capacity of 3,500 lbs and a tongue weight capacity of 300 lbs. You will need the recommended ball mount, part # C45522 and will also need a hitch ball like the Tow Ready 2 Inch Hitch Ball, part # 19258, For a wiring harness, you will use the # C55343 if you have a Wagon and # HM40565 if you have a sedan. I am including a link to the installation instructions...
  view full answer...
• Hitch and Wiring for 2002 Ford Escape V6
  Curt's 2-inch Class III hitch # C13506 is confirmed to fit all versions of the 2002 Ford Escape. I verified this with Curt's Fit Guide. If you also need a 4-pole trailer wiring harness you can use part # C55255 if you have the factory tow package or part # C55343 if the Escape does not have the tow package. For a Class III ball mount and 2-inch ball for towing you can use # C45036.
  view full answer...
• Recommended Plug-In Trailer Wiring Harness for 2004 Mercury Sable Wagon
  We do offer a 4-pole trailer wiring harness with simple plug-in installation for your 2004 Mercury Sable wagon. You can use Curt T-Connector harness # C55343. This harness provides a substantial maximum current output of 3-amps per stop/turn circuit and 5-amps for the taillight circuit. Installation instructions are linked along with two helpful articles.
  view full answer...
• Will the C12232 Class III Trailer Hitch Fit with Factory Dual-exhaust on a 1998 Mercury Sable
  I spoke with my contact at the manufacturer to make sure there were no issues with the factory dual exhaust on the 1998 Sable and found that you should have no trouble installing the hitch on your vehicle. You will need to temporarily lower the rear exhaust though. The installation instructions (see link) are clear and easy to follow. In addition to the hitch, you might also need the following to complete your towing set-up: Trailer Wiring Harness, # C55343 if you have the wagon and #...
  view full answer...
• Why Vehicle Wiring Harness, # C55255, Is Not Working In A 2002 Ford Escape
  On your 2002 Ford Escape you do not need the additional relay. That is only for the 2008 and newer Ford Escape. It sounds like you have the port, but do not have the tow package. Unplug the Vehicle Wiring Harness, # C55255, from your port on the vehicle and with a Circuit Tester Kit # PTW2993 check the vehicles port to see if you are getting current to all the pins in the port. If you have current to all the pins then the Vehicle Wiring Harness, # C55255, would be the problem. If you...
  view full answer...
• Recommended Wiring Harness For 1997 Mercury Sable Wagon
  For your 1997 Mercury Sable Wagon, the wiring harness you need is part # C55343. This harness plugs directly into the Sable wiring with no cutting or splicing. You simply plug it into the connection points behind the tail lights on your vehicle. You will need to remove the tail light assemblies to access the plug-in harness. When working with electrical connectors I recommend using dielectric grease like part # 11755. This keeps dirt and moisture out of the electrical connections and...
  view full answer...
• Availability of Trailer Hitch for 1996 Ford Taurus With Dual Exhaust
  According to Curt Manufacturing, their # C12232 Class II hitch fits all models of the 1996 Ford Taurus, including the SHO and wagon. As long as your exhaust system is in the stock position, the hitch will fit great. If you'll be using the hitch for light duty towing, you'll also need a # C45522 ball mount and a # PC2 hitch pin and for a trailer ball use # A-80 for a 1-7/8 inch or # A-82 for a 2 inch ball. For trailer wiring you will use # C55343 if you have the wagon and # HM40565 if...
  view full answer...

Do you have a question about this Custom Fit Vehicle Wiring?