Video Transcript for In-Depth Review of the 36" Long Handle

Today, we're going to be taking a look at the 36 inch long, heavy duty handle, from Polar Hardware Accessories and Parts. This handle's going to make getting into, and out of your trailer, or camper much easier. It can be used for other applications, as well. The grab area, so measuring from this area here to this area here, measuring that inside portion, it's going to measure about 36 inches long. It's got the mounting tabs on each side. Those are going to measure about 1 inch wide.

Two mount holes per side. Mounting hardware's not included. The handle's made from a steel construction. The overall length is going to measure about 41 and 7/8 of an inch, and then, the diameter is going to measure 5/8 of an inch. The mount hole diameter, that's going to measure 5/16 of an inch. The distance between the holes, center on center on each tab's going to be about 3/4 of an inch.

If we take the center on center measurement, going the full length, outer hole to outer hole, center on center, it's going to be about 40 and 3/4 of an inch. Then, the next set of holes, so inner hole to inner hole, center on center, it's going to measure about 39 and 1/4 inches. The space that we have from the mounting surface, so from the table top to the bottom of this portion here, that opening, going up and down, that's going to give us a height measurement of about 2 and 1/8 of an inch. That's going to do it for today's look at the 36 inch long, heavy duty handle from Polar Hardware Accessories and Parts.