Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
These TorkLift Talon rear tie-downs mount directly to the frame so your camper stays stable no matter the distance. Attaching to the frame keeps the load low and evenly distributed, so your truck handles like it should without extra sway or shifting. The tie-downs create solid anchor points that hold firm over rough roads, giving you a smooth, safe ride every time.

The custom design bolts straight into existing holes in the frame, so there’s little to no drilling or modification needed. Because they mount tight to the frame, you keep your ground clearance and avoid snags or drag when driving on uneven terrain. It’s an easy bolt-on job that fits cleanly and looks like it came that way from the start.
Made for long hauls and tough climates, these tie-downs pair rustproof aluminum arms with rugged stainless steel receiver brackets. A high-impact powder coat finish adds another layer of corrosion protection. The result is a lightweight system that resists rust and wear so you can count on it season after season.
When you’re not hauling a camper, just pull the arms out of the receiver brackets. The remaining brackets sit nearly flush under the truck and are barely noticeable. You keep your truck’s clean look without hardware hanging below or sticking out.

Each arm includes two pin holes so you can extend them for proper turnbuckle alignment—clearing fenders or sidewalls easily. With two anchor holes to choose from, you can fine-tune the angle for a secure, multi-directional hold that keeps your camper steady mile after mile.

Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Hi, everybody. Andy here with etrailer.com. And today we're gonna take a look at these TorkLift Talon Custom Frame-Mounted Aluminum Rear Camper Tie-Downs. Now these tie-downs are going to give you an attachment point at the rear of your truck bed for securing your bed mounted camper. These are custom fit tie-downs that are designed to fit various versions of the 2013 to 2018 Ram 2500 and 3500s. To confirm that these are going to work for your truck, take advantage of our vehicle fit guide here at etrailer.com.
Input the year, make and model of your truck and our fit guide will let you know if these will work for you, or if we have something comparable that will work for you. Now, the frame mounted design is going to ensure excellent handling because securing your camper to your truck's base, instead of its bed, better distributes the weight to keep your setup from being too top-heavy. The brackets are going to fit tight to your truck's frame, so there's not gonna be any loss of ground clearance. And these rustproof and lightweight aluminum alloy tie-down inserts are going to secure to these durable stainless steel receiver brackets. Now these inserts can be easily removed from the frame mounted brackets, and I'm just going to unfasten the included bail pins.
And what you can do is just easily remove these from the receivers. And these inserts of course are constructed of lightweight aluminum. So they're very light, very manageable yet they're gonna be very durable as well. And so these can be easily stored in the back of your truck's cab underneath the seat, maybe. So it's not gonna be any problem at all managing those aluminum inserts.
Now, when you remove the inserts, these are going to be, the frame mounted brackets are going to be virtually undetectable when they're not in use. And included are these vinyl caps that you can use to just put over the front of the receivers and those caps are gonna help keep out grime and dirt and keep the inside of the receiver clean for when you replace the inserts back into those brackets. Also foam plugs are included to insert into the rear of the brackets to keep out dirt and grime as well. I do wanna point out that these inserts have two different holes that the bail pins will go through. So if your camper is a little bit wider, you're gonna use this first hole here on the insert to have that tie-down point stick out a little bit farther.
And if your camper's a little bit narrower, you can just move it into this second hole. And those bail pins are going to secure these into place. I'm gonna line up my holes here. And so that's going to secure easily in place, giving you that secure connection point for your turn buckles. The high impact powder coat finish is going to add an extra layer of protection to the brackets and inserts. And you're going to get everything that you see here on the table, in front of me. You're going to get two rear tie-down inserts, two frame brackets, the necessary hardware, the instructions. And front tie-downs are sold separately but you can find them for your vehicle again by using our fit guide here at etrailer.com. These are made in the USA and they do have a lifetime warranty. Well, that's gonna conclude our look today. I do hope that it was helpful for you. Again, my name is Andy. Thank you for joining me..
Ratings & Reviews
Do you have a question about this Truck Camper Tie Down?
Condition: Surface Scratches
Notes: This item has superficial scratches. Otherwise new and unused.
Info for this part was:
At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.








Robert
7/11/2024
Tie downs are still installed on my 2022 GMC and are working well in holding my camper in place.