Recommended Camper Tie-Downs For A 2007 Dodge Ram With A TorkLift SuperHitch  

The 48 inch size part #TLE1548 would be your best option as having a little bit extra extension would give you a little better clearance in tighter turns. Especially since your hitch is probably a little recessed under your bumper and extra length…

The TorkLift SuperTruss Hitch Extension, part #TLE1548 is designed to work with the SuperHitch original, Magnum, or Hero trailer hitches. using the extension in any other manner or without a second receiver tube would void the warranty and may cause…

The longest extension available that will work with the factory trailer hitch receiver on your 2014 Dodge Ram 3500 is the Trailer Hitch Extender #e48YR. You will need to measure from the center of the hitch pin hole on your trailer hitch receiver to…

The TorkLift SpringLoad XL Turnbuckles #TLS9050A are not vehicle specific parts but they need to be used with the correct tie downs for your 2009 Dodge Ram Pickup that are vehicle specific. Those are the TorkLift Custom Frame-Mounted Camper Tie-Downs…

The TorkLift SuperHitch Original Trailer Hitch Receiver #TLD1101 that you referenced has two 2 inch hitch openings stacked on top of each other. It is in the Class V category that includes 2-1/2 inch and high capacity 2 inch hitches. I apologize for…

Unlike other hitch extensions the Torklift Hitch Extension part #TLE1548 that you referenced does not have a set percentage for the capacity lost when used in a hitch. Instead it has a set number capacity it would have when used with the higher rated…

In order to use the TorkLift SuperTruss Hitch Extension part #TLE1548 on your 2006 Dodge Ram 3500 you will need to remove the factory hitch and install the TorkLift SuperHitch Original Trailer Hitch Receiver part #TLD1101. There are no other options…

Yes, we have had customers come back and tell us that the TorkLift SuperHitch Original Trailer Hitch Receiver item #TLD1102 is compatible with a Hellwig Sway bar. I do not have any information on how this is accomplished. The TorkLift SuperHitch…

To use a TorkLift 48" hitch extender you will have to change out your receiver on your 2019 GMC Sierra 3500HD Denali. The TorkLift Cannon Hitch Extension #TLE1648 will only fit the 3" receiver that comes on the Ford Super Duty trucks. To…

The Curt Trailer Hitch Receiver - Custom Fit - Class V XD - 2" #C15409 is designed to fit below the factory hitch receiver on your 2008 Ram 3500 dually. The top of the Curt receiver will be 8-1/2 inches from the bottom of the frame where it…

The correct Torklift hitch for your 2012 Ram 2500 that has a bolted on factory trailer hitch is the part #TLD1101. We have confirmed this fit with Torklift so we know it will work. For Supertruss extensions we have three options. The part #TLE1536…

I have a solution for you, but the TorkLift #TLD3109 are not compatible with with the SuperHitch #TLD1102 since the new SuperHitch's side plates are going to occupy the same spot where those old tie downs were previously installed. For this…