To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
Because these anchors bolt to your truck's frame under the bed, you can maximize your truck's payload capacity. And they're only exposed when you need them, so no more worries about your tie-downs rusting quickly or getting in your way.
Camper shift during travel can damage your rig and ruin your ride. These anchors bolt directly to your truck's frame - the most secure mounting point - so your camper stays locked in place, even during sudden stops and crosswinds. If you've ever gripped the wheel tight, wondering if your load will hold, this is how you drive without that worry.
And because these tie-downs mount to the frame, they distribute force lower than external mounts and across the full length of your truck. This reduces sway, minimizes twisting between your camper and truck bed, and improves how your truck handles with the load. Unlike bed-mounted systems that can feel top-heavy when you're driving through the mountains of Colorado or the windy plains of Kansas, these anchors help your setup stay balanced and stable.
These anchor points aren't just for slide-in campers. You have a truck, so you're going to want to haul things like motorcycles or ATVs, firewood, hunting equipment, or home improvement supplies in the bed too. These give you a reliable anchor point to secure those things, and because they're frame-mounted, they're going to let you get the maximum capability out of your rig. When you're ready to haul, just pull the anchor up, twist, and remove the anchor cap to reveal a full 360° swivel point. This makes it easy to attach tie-downs or ratchet straps from any angle, which is perfect for odd-shaped cargo, ATVs, or gear that doesn't sit square. And if the anchor gets pushed down without the cap, you won't have to worry about fishing it back out. It comes back up easily - the cap just helps to keep debris out and gives your truck that clean look you love.
When you're not using them, the anchor points retract flush into the bed, keeping your bed clean, functional, and free of bulky tie-down hardware. You can maintain a sleek factory look for your daily driving without giving up secure anchor points when it's time to haul.
Each set is custom designed for your specific truck model and meant to replace your factory-installed, light-duty cargo anchors. This means you get a smooth, bolt-on installation with no drilling into your truck's frame. You will need to cut through your truck bed for the tie-down receiver assembly, but a drill template is included to make positioning easy and accurate.
These truck bed camper tie-downs are ideal for slide-in campers that use internal anchor points: Cirrus, Four Wheel Campers, Travel Lite, Scout and other models. Use them with Apex Turnbuckles (TL88SV) and front Apex tie-downs (TL68SV), both sold separately, for a complete tie-down system.
These tie-downs are made from corrosion-resistant materials so you can expect them to hold up against different year-round weather conditions, road salt, and rough terrain without flaking, peeling, or premature rusting. ApexAnchors are made in the USA and backed by TorkLift's lifetime warranty so you can have confidence in your setup mile after mile.
We love seeing our neighbor's setups! Once you have this system, send us your setup pics, trail stories, and favorite campsites. Whether you're deep in the desert or parked beside a quiet lake, your adventures inspire others to build something amazing too.
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Hi, everyone, Steven here with etrailer.com. Let's take a look together at our TorkLift ApexAnchors Truck Camper Tie-Downs, In-Bed Frame Mounted for the rear of the vehicle. So folks, just like I said, this is a custom fit application. Make sure you're double checkin' the fit guide here at etrailer.com to be sure you're gettin' the right parts the first time. Now, with this In-Bed Frame Mounted rear of your vehicle kit here, you're gonna have absolutely zero loss of ground clearance. So that rig that you're puttin' in the bed of your truck, that camper, this is gonna be an invisible, more or less, installation, 'cause when you're done, all you're gonna see is the tops of these rubber plates here, these rubber pads rather, in the bed of the truck, flush, nice, mounted securely, and clean lookin'.
Now again, tailor made for your vehicle. Lemme step outta the way, so you can see it a little better. All you have to do is simply pull up on the rubber. You may have to twist a little bit, just depends, but once you twist that, you're gonna lock it out, that way this can't go back down. And then this rubber cap that comes on both of these, don't lose that, because that's how you're gonna get this back out whenever it's time to use it the next time.
So make sure you put these in a safe location, toolbox, whatnot. In the event that you, for whatever reason, lose 'em or forget where you put 'em, you can from the bottom push up or get you like a little hook tool and carefully pull up to get it back up. So keep in mind you wanna keep an eye on these little plugs here, as far as being able to get this put back in and mounted it and retracting it flush rather, once you're done untying or unanchoring the connection points. There we go. Now these will pair with a front set of tie-downs sold separately and also with turn buckles.
Those that require, those would hook inside of there and then hook up to the internal anchor points on those in-bed campers, such as like a Cirrus four wheel campers, Travel Lite and Scout, those kinda campers. So, these are heavy duty. They're about 2000 pound capacity per anchor point, so by the time you get one, two, three, four, you're gonna have 8,000 pounds of hold and safe anchoring on the vehicle. Now, these do bolt directly to the frame. They are, again, custom mounted, so you can be sure that you're gonna be safe and you're gonna be on the strongest part of your truck.
And you could potentially, if you have these in the bed, mount like a motorcycle, tie down a motorcycle rather, or an ATV, those kinda things as well. So multiple applications with these in the bed of the vehicle. Let's say maybe you don't have a camper, but you just want a nice tie-down anchor, you can potentially get these and use it for that as well. Folks, that will wrap it up for our quick look together. I'm Steven, thanks for watchin'.
Ratings & Reviews
Do you have a question about this Truck Camper Tie Down?
Condition: Surface Scratches
Notes: Item has cosmetic scratches.
Info for this part was:
At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.