Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Durable rubber, jaw-style clamps with adjustable straps help you store and transport shovels, axes, high lift jacks, and more. They mount horizontally or vertically to your vehicle, trailer, garage wall, or any flat surface. 50 lbs WLL per pair.
Features:
Specs:
Note: Quick Fist clamps are not to be used on exhaust pipes or any pipe that consistently exceeds a temperature of 180 F (82 C).
A new Quick Fist clamp fresh out of the mold can be stiff. Use two hands to open the jaws vertically and then pull each jaw once or twice. Close the jaws and open and close the strap a couple of times. It's now ready for mounting.
For applications where the Quick Fist clamp will be used at or near its maximum opening dimension, the clamp will not work in your hand, as it must be bolted to a fixed surface for the rubber to stretch properly.
Mount your shovels, axes, D-cell flashlights, and high lift jacks with the Quick Fist original clamp.
1. Use #10 bolt or screw to fasten. Do not over-tighten.
2. Mount with the strap facing in any direction.
3. To clamp: put the tool or implement into the jaws. With both of your thumbs on the strap, push strap to reach the desired tightness. Repeat as necessary.
4. For certain applications, like roof racks with round tubing, you can install the Quick Fist clamps using hose clamps. Make sure you center the hose clamp on the plastic washer to avoid cutting into the rubber clamp.
5. For smaller diameter objects, push jaw without strap inside the other jaw and tighten strap on top of jaw.
You may also install your high lift jack using three Quick Fist clamps spaced evenly along the steel bar of the jack.
1. Drill out a hole in the Quick Fist clamp with a 7/16" (12 mm) bit. Use a 2-1/2" (65 mm) long, 3/8" (10 mm) bolt to attach the clamp.
2. To mount the jack, hold it parallel to the three clamps. Put one end of the jack into a Quick Fist clamp, with the bolt through the steel bar, and then loosely lock the clamp. Next, place the steel bar into the other two clamps and lock. After all three clamps are holding the jack, tighten as necessary.
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Hello, neighbors, Stephen here with etrailer.com. Let's take a look at our Quick Fist Original Clamps. They're gonna be one to two and a quarter inch inner diameter as far as holding material and things, and they can hold 25 pounds each. Now you will get quantity four, just like you see before me. These are gonna be great for emergency vehicles, work trucks, off-road vehicles, military vehicles, maybe ATVs, and boats. So, again, you could just mount 'em pretty much anywhere you want and then you'd be able to put in your shovel, maybe, pick ax, those kinda things, maybe a ax, a flashlight, jacks, those kinda things.
One thing to note with the jacks, there's some special instructions and possibly some modification on installation, so make sure you're reading the instructions on that particular item. Now these do mount with one, sold separately, a number 10 bolt or screw. Again, you have to get that separately, maybe a local hardware store or something of that nature, and basically it's going through the holes here when you're installing it. And then you've got these hard plastic, I'm gonna call 'em a spacer block, but that gets inserted inside and that just kinda helps hold everything. Now one thing to note as well is that, when these are new, like they are now, fresh out of the box, sometimes that rubber can be super stiff.
That's totally normal. The manufacturer recommends either, possibly just leave 'em out in the sun for a couple hours before you install 'em. That'll make 'em a little bit more pliable to work with. Or just kinda work 'em back and forth a lot of times to kinda loosen things up. Keep in mind, it can hold, like I said, up to those two and a quarter inch diameter items.
Right now, without this folded out, that inner diameter's about one and a half inches, as you see. So to get to two and a quarter, obviously it's getting wider. Keep in mind, it's gonna be easier to spread this out whenever you've got it bolted in place. Then you'll be able to really get around it and hook it close. So, again, keep in mind it's rubber, it is pliable, you're gonna have to do some manipulation probably to get certain items in there.
That's just normal. About two and three quarters long that way, and about two and a half that way if I go all the way up here to where the angle comes over. On the width, right about an inch. And, again, each one of these can hold 25 pounds of material and weight. So two of 'em, obviously, 50 pounds. So again, holding something like an off-road jack is doable with these. I think the biggest thing is, with a lot of the farm jacks, they're, like, a rectangular shape versus this circle shape, so, again, just check the instructions on that as far as mounting something of that nature. They are made of a heavy-duty, transportation grade rubber. They're unaffected by climate, chemicals, those kinda things, and they are UV resistant as well. Well folks, that's gonna wrap it up. Just a quick look at these Quick Fist Original Clamps. I'm Stephen, thanks for watching.
Customer Satisfaction Score:
96% were satisfied with this product
4% of customers were not satisfied
Ratings & Reviews
Used these Quick Fists to mount same hand tools to the ROPS on my tractor. Works great
These are nice but it would be better if they included the #10 bolt and nut the instructions reference.
Perfect solution for what I needed. Couldn't find anything close to this anywhere else online including Amazon. Using this to hold my folding dock ladder in place when it is out of the water. Good Quality. Thick, Flexible and strong.
Excellent mounting solution for my emergency axe in my trunk! Sturdy and dependable!
Installed these on our Jeep Wrangler to hold a shovel. They hold really tight, should be a great addition to our kit. Also, MADE IN THE USA was a pleasant surprise!! Thanks for a great American made product!!
Fits great and holds awesome. Just what I wanted!
I installed these clamps to hang an axe in my converted utility trailer and they are perfect. Work as expected. Only reason I didn’t give then 5 stars is because they didn’t come with bolts or screws.
Used one pair to mount a shovel and another pair to mount an axe to the bed rack on my pickup. Are still working great a year later.
Although the quick clamps are heavier than I needed they will work just fine. I am mounting them on the door post behind the drivers seat in my truck to hold a night stick “ Billy club”! I’ve had the club in my possession for over 50 years. Last time I wore it I was on duty in some Mediterranean Sea port.
I received the Quickfist Original clamps yesterday. They installed easily. I am using them to hold photography c stands in an enclosed trailer and so far they are holding strong. I will undoubtedly be ordering more of these!
Excellent product. Does what is claims.
The one bolt mounting is a little flimsy for very heavy items so you have to make the call yourself on safety.
There is no locking capability thus your fastened item can be removed quickly by anyone. Adds about 1" of clearance so check your location carefully.
I love these clamps. They hold fast to the roof rack and don't spin. I use them to hold my AX and Shovel on my off road camper. They can be a little difficult to mount by your self but I cannot question the design because they do exactly what I want. I have traveled to Texas, West Virginia, North Caroline, Georgia and Florida without giving my tools a second thought.
Works well on my tractor for holding to ols
So far they have been working well holding rakes to the ceiling of my enclosed trailer.
I made a rack for the ATV to hold my axe and shovel, the clamps seem to work pretty good so far. They are kinda hard to open and close in cold weather, (below 25 F.)
They claim to be good for 1" diameter, but they don't clamp as well as I would like, so I am going to get a bigger diameter handle to get a better grip. Overall I like them so far.
After searching the web for weeks, I was ecstatic to find these hooks! I'm sure I'm not using them for the purpose intended, but they look great holding my axe on the wall. My only gripe is that there is only one way to secure it to the wall. I'm sure at dead center is the optimal spot for mounting, but perhaps consider adding so diagonal screw holes on either side, that's where I ended up putting my screws in. Other than that the product easily exceeded expectations!
Fast and correct! Definitely recommend!
The best seller can trust that your order is right and onetime. the best
Great selection of quality products at reasonable prices with very fast shipping.
It says 1"- 2 1/4" clamp. It does not fit 2 1/4 pipe.
This fit great on 1.5 inch but I can not stretch the rubber to fit over 2 inch. Yet they say the will fit 2.25
Info for this part was:
At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Kate F.
1/28/2026
Thanks for the feedback Robert. We’re glad to hear they worked well on the 1.5-inch mount, but we understand the frustration with the tighter fit on larger sizes. These clamps are designed to stretch to fit up to 2.25 inches, but the rubber is intentionally very stiff when new so it can hold items securely once installed. A quick tip that can help is warming the rubber slightly with hot water or a hair dryer before installation, which makes it much easier to stretch over larger diameters. Let me know how that works out for you.