Navigate water in low visibility with this 3-1/4 " x 2-1/2 ", waterproof LED navigation light. Red light can be seen for up to 2 nautical miles. Red light indicates port side (left), so other boats can determine your position.
Features:
Specs:
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Jeff Hello everybody. This is Jeff at etrailer.com. Today, we're gonna take a look at this TecNiq red port LED boat navigation light. Now, whenever you're operating your power boat between sunset and sunrise, or in other times of restricted visibility, such as in fog or rain, you need to display the appropriate navigation lights, so that boats can see you and take the appropriate action to avoid any collision. Now, in general, all navigation light systems will include the red, like this one, and the green side lights. These will indicate the port side, the red does.
And then the green, which is the starboard side of your boat, as well as one or more white lights. Now, this one here is a LED red port navigation light, provides increased visibility for your boat. When it's turned on, it does have a range of two nautical miles. Now, we do also sell the green starboard light, which is available on this product page has a related product. The green light is a part number TN85ZR.
Now, if you notice, this has a nice, sealed, waterproof housing and lens unit. Has an IP 68 rating. This is a clear lens over a red LED. Now, what I do wanna mention is at the end of this video, I am gonna connect this light to some 12 volt power just to show you how bright the light is, but I first wanna go over some of its features. It does use a premium LED, which is energy efficient, long-lasting, and vibration resistant.
It is rated for up to 100,000 hours of operation. They do use a military-grade construction of the circuit board on this light. Uses the patented TecSeal potting, which the process ensures a waterproof protection. Now, this is compatible with 12 volt DC systems. It is a surface mount installation.
It does require the use of a protective mounting cover. Again, we sell those separate on our website. They are listed on the product page as a related product. And they do come in many different colors like a stainless steel, which I wanna show you right here. I pop up an insert, there's the stainless steel version. They also do it in a black housing. Now, this does hardwire to your application. You can see the two wires here, the power and the ground. The length on the wires is about six inches. A few specs will measure the light itself. So, if we do the width of it is one inch. The overall height, that's gonna be right at 7/8 of an inch. And the overall depth is also right at 7/8 of an inch. Input voltage is nine volts to 14 volts. And what we're gonna do now is go ahead and hook up our power and turn it on. Once we got it hooked up, go ahead and turn on our 12 volt power. And just like that you can see the red LED light up. I wanna turn off the overhead light just to show you how bright a area this LED does light up. And again, this is the port side light. Go ahead and turn back on our overhead lights. And go ahead and turn off our power. But that should do it for the review on this TecNiq red port LED boat navigation light..
Ratings & Reviews
Great product
Nice quality
Great item, great service.
Great service item exactly how pictured. Thanks
They look good will put them on hopefully they wont rust
Perfect!! Outstanding even!!!
The service and description was just perfect, outstanding video as well
Love it super bright and on the bow of my open fisherman boat and is perfectly bright and very visible at night
Purchased for my 2016 cobalt 220s. It’s a great fit and does not get super hot like the original light. I would purchase this again.
good i like
So far so good. Easy install. Looks good and bright.
The design of this light is awful. The cover does not seal it from the elements and water can enter at will. Then the only way water can get out is through the wiring hole thus entering the boat. I am going to install it but expect it not to last
Looks to be well made. It is smaller than I thought it would be.
I will be installing the unit soon and will test the brightness.
The fact that the light has a stainless steel cover and is waterproof is what sold me.
Looks great arrived on time and was notified through out the delivery process. Thanks
Timely delivery, sleek low profile light, responsible customer service. One of two items arrived without a mounting pad. Company did not argus, question, or make me go through an annoying justification or return process. They accepted my notice and quickly sent out a new and complete product (not just the missing piece) to rectify the situation. Very appreciative.
Looked just like the original thank u.
Worked as intended and fit perfectly
Works as designed. You need to include clear explanation of how to take the cover off to access the inside of the light in case of a wire failure, etc. that is the only reason I didn’t give five stars.
I have gone thru a few navigation lights that were cheaply made and broke when the anchor line brushed against them so thought that this stainless steel one would be better. But it's about .5mm think so I am doubtful it will hold up...I guess for the price I should have known that it would be pretty thin but I was disappointed so 2 stars. Maybe it will surprise me and hold up but I doubt it so will probably be replacing this one in a year...
Nice replacement.
Info for this part was:
At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.