Hot Spot Round Convex Adjustable Mirror
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Today we're going to be taking a look at the hot spot 2-inch round convex mirror from CIPA. The actual mirror is going to measure two inches in diameter. The housing of the mirror, so the actual diameter of the entire unit is about two and one quarter. The adhesive pad is going to be about one and three eighths. One of the things about this mirror that makes it a little bit different than others is that this outer part can actually rotate 360 degrees. The mirror can rotate, that way you can achieve the angle that you need for your application.
It's a convenient stick-on application. It's got the adhesive tape here on the back. Peel that off, stick it a nice clean surface. This is going to fit most car and truck applications. Overall a hot spot mirror is simply going to increase visibility and blind spots, making it easier to pass and change lanes, and even park in some situations. I do want to point out that it has a little bit of a wedge shape to it, so you can see here on this side, it's a little bit thinner.
If we rotate it to the opposite side, it's a little bit thicker. That's just really going to help further reduce those hard to see areas. That's going to do it for today's look at the hot spot 2-inch round convex mirror from CIPA.
Ratings & Reviews
Shipped and received on time and intact.
I needed a spot mirror that would eliminate a blind spot. I mounted this mirror under the original mirror on the mirror arm. Fit perfectly and only took 1 minute to install.
Greatly improves rear visibility
I liked this mirror so well on the driver's side, I ordered a second one for the passenger side of my '06 Dodge Sprinter View. Now I have a good side View on both sides of my View! etrailer is a Rock Star!
Very good rectangular mirrors for my van.
Easy to install on existent mirrors.
When first installed, one fell off. Fortunately, it was in the parking lot. Reinstalled it and it’s still fine after a year.
You can see the edge of the glass very slightly. Not really a problem.
I would recommend this product.
Good match for the old mirrors. Good price, fast shipping.
Bought the custom extensions mirrors for my Silverado to aid in backing up our new camper trailer. Easy to install and remove. Videos were a great help. They not only helped in parking the camper but added a great deal of visibility while driving which makes for a safer trip.
Great price fst shipping
I mounted these mirrors on our Winnebago Ford E350 chassis. It has the standard Velvac mirrors with the stick-on blind spot mirrors. The stick-ons used up a lot of my flat glass real estate, making it harder to see behind us. To upgrade the Velvacs would have cost a few hundred dollars. Over a two week period I devised a couple of mounting solutions. I bought two 5/16" ubolts to mount onto the mirror arms. The radius was large enough I used fuel line to pad and insulate the ubolts. One thing I appreciate about these mirrors are the wrench flats on the 1/4" stud and the fact that the tension can be adjusted on the ball joint. etrailer good service as usual.
Hello,
Yes you can use my install for feedback.
Only thing is I should have checked to see if you had not sure what they are called but “ brackets “ that go around bars for mirror mount would be nice to have a choice of size. Hard to find and would have saved me shipping and made a bigger sale.
??Maybe you could put a pop up
“ wait before you go, have you considered mounting hardware? What size pipe are you going to mount mirror to? “??
Anyway here is mine.
I Needed to put extension mirrors and wanted square ones to match and found them on your site. I still need to figure out one mount need like a 3” arm and a 1-1/2” and 1” clamps to stabilize passenger mirror.
Two things I didn’t like was..
1, the loose mirrors inside the plastic housing probably going to just put clear silicone on edges.
2, the sticker ....
“ objects in mirrors are closer than they appear “
has glue that’s hard to remove and leaves a residue. Cling on label would have been better.
Just what I wanted, and learned to expect from etrailer.
Works very well on my Prius
Great price
I received my order in record time and the product was exactly what I wanted. Great service and communication
The angle is pretty extreme. I couldn't come up with a use for it.
Mirror was spotted and I was unable to clean, should have sent it back but hardly worth the effort
Nice product and easy to instal. Thanks etrailer.
you can adjust it swinging/turning the mirror to your liking. It's a little bulky though.
Double sided tape stuck well and the mirror adjustment works great for those blind spots..
Mirrors are a nice option to be able to adjust right into your blind spot. As always, great service from etrailer.
Purchased these to add to my k source mirror extensions to have better blind spot vision. Very satisfied with there performance, the 360 adjustment makes it right!!
These stick on mirrors are great very useful and still look like brand new for a year old.. They adjust perfectly for that blind spot.
I ordered the wrong size. Should have ordered a 3”
Do you have a question about this Blind Spot Mirror?
Info for this part was:
At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.