CIPA Hot Spot Round Convex Mirror
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Hi there, I'm Michael with etrailer.com. Today, we're gonna take a quick look at this hotspot three-inch convex stick-on mirror. Now, this is going to help to decrease your blind spots and increase your visibility while you're passing and changing lanes and so that you're gonna be safer, you're not gonna have to worry about any close calls and that sort of thing because you weren't able to see another vehicle or an obstacle that would be in your blind spot. This is three inches in diameter, you can see there. And so it is going to be a pretty small size, so it will be pretty easy to find a place to install this. It does have that stick on pad on the backside there.
So you just pull off that backing and then stick it onto your factory mirror and that's going to give you that convex lens so that you can see a greater area than you would normally. This is a acrylic material, so it is gonna hold up well, it's not going to break like glass potentially could, and this will fit on most car and truck applications. So pretty simple little mirror here, but it's gonna give you a lot of options to make sure that you're driving safe. You can see any obstacles that are coming up before you change lanes and pass and that sort of thing. So that completes our look for today.
Again, I'm Michael with etrailer.com. Thanks for watching.
Ratings & Reviews
GREAT FIT!!!!!!!!!!!!!!!!!!!
Shipped and received on time and intact.
Greatly improves rear visibility
I needed a spot mirror that would eliminate a blind spot. I mounted this mirror under the original mirror on the mirror arm. Fit perfectly and only took 1 minute to install.
I liked this mirror so well on the driver's side, I ordered a second one for the passenger side of my '06 Dodge Sprinter View. Now I have a good side View on both sides of my View! etrailer is a Rock Star!
These stick on mirrors are great very useful and still look like brand new for a year old.. They adjust perfectly for that blind spot.
Very good rectangular mirrors for my van.
Easy to install on existent mirrors.
When first installed, one fell off. Fortunately, it was in the parking lot. Reinstalled it and it’s still fine after a year.
You can see the edge of the glass very slightly. Not really a problem.
I would recommend this product.
Good match for the old mirrors. Good price, fast shipping.
Bought the custom extensions mirrors for my Silverado to aid in backing up our new camper trailer. Easy to install and remove. Videos were a great help. They not only helped in parking the camper but added a great deal of visibility while driving which makes for a safer trip.
Great price fst shipping
I ordered the wrong size. Should have ordered a 3”
I mounted these mirrors on our Winnebago Ford E350 chassis. It has the standard Velvac mirrors with the stick-on blind spot mirrors. The stick-ons used up a lot of my flat glass real estate, making it harder to see behind us. To upgrade the Velvacs would have cost a few hundred dollars. Over a two week period I devised a couple of mounting solutions. I bought two 5/16" ubolts to mount onto the mirror arms. The radius was large enough I used fuel line to pad and insulate the ubolts. One thing I appreciate about these mirrors are the wrench flats on the 1/4" stud and the fact that the tension can be adjusted on the ball joint. etrailer good service as usual.
Hello,
Yes you can use my install for feedback.
Only thing is I should have checked to see if you had not sure what they are called but “ brackets “ that go around bars for mirror mount would be nice to have a choice of size. Hard to find and would have saved me shipping and made a bigger sale.
??Maybe you could put a pop up
“ wait before you go, have you considered mounting hardware? What size pipe are you going to mount mirror to? “??
Anyway here is mine.
I Needed to put extension mirrors and wanted square ones to match and found them on your site. I still need to figure out one mount need like a 3” arm and a 1-1/2” and 1” clamps to stabilize passenger mirror.
Two things I didn’t like was..
1, the loose mirrors inside the plastic housing probably going to just put clear silicone on edges.
2, the sticker ....
“ objects in mirrors are closer than they appear “
has glue that’s hard to remove and leaves a residue. Cling on label would have been better.
Just what I wanted, and learned to expect from etrailer.
Works good thanks
It's a convex mirror. It works
Its a convex mirror, it had a sticky pad - it stuck to the wall. I can see around the corner - WINNER
Works just fine.....
A simple purchase - a convex side view mirror -- but it is just what I needed and works great. Thanks!
Just a bit of added assistance that is needed when pulling that trailer. Saved my hide a few times.
If your looking to get rid of blind spots then buy this! Great little mirror. It's built well and uses strong adhesive tape. Super easy to install as well.
I live by these mirrors on my truck. Just traded my older F150 in for a new F150. My older truck had one of these mirrors on both left and right side mirrors. The new truck came with one from factory on drivers side but none on passenger side. Well almost ran into a motorcycle I didn't see on the right side. Ordered this 3" mirror right away and stuck it on the right mirror. Now no more blind spots!
Do you have a question about this Blind Spot Mirror?
Info for this part was:
At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.