Most Popular Aluminum for Ford Ranger

They look decent enough and do exactly what I need. Super easy install. I think I'll be able to remove the rear one(4 nuts with a zip gun) slide my KLR 650 in the bed put the rear one back on load the canoe and scoot down the highway in my 2011 Ranger. Super happy with these at this price point.

The rack was a good price. It was delivered 4 or 5 days after it was ordered. All the parts were there and no damage. It was VERY easy to assemble and put on my truck. It seems to be very solid and pretty well made. Seems to be a great value. I purchased to transport kayaks and lumber that does not fit into the short bed.Time will tell , but so far so good.

The rack is great. Simple to install, extremely sturdy & very well designed. I drove it to Cars & Coffee yesterday & someone asked me what I needed to haul or if I merely installed them "because they look cool." The young lady, Janeth, that helped me was really great! Smart, polite, patient, & above all... knowledgeable about product. I would suggest selling the rack specific for Retrax bed cover. The amount of hardware left over when you add the adapter kit to the standard rack seems really excessive. Rather than be $169 add, it should be a deduct of at least that much.

I had a Thule rack for almost 10 years, but new truck came with a tonneau and the Thule I had was not compatible. This is very solid with the tonneau adapters.Its not as easy to adjust as the Thule but only adjusting a couple times a year, it's ok.

Fantastic experience from ordering to receiving my new Thule Trac Rac system. My package was delivered quickly and without any damage. The installation instructions were clear and simple to follow. I’m very happy with my new rack system

Rack has been stable with a 250# RoofNest tent installed.

Bought this for my 2020 Toyota Tacoma and with the adapter kit (https://www.etrailer.com/Accessories-and-Parts/Thule/THXK4.html), it works perfectly for what I needed. Right now using it to haul two kayaks but eventually will be using it to haul a hardtop camper. Perfect midsize height. Very sturdy, somewhat easy to assemble (Thule instructions are pretty bare bones but once you get started it's pretty easy to follow).

It’s very well made, heavy duty. Looks good and should last a very long time. I’ve put my Yakima SkyBox 18 on it and we are ready for adventure.

Best rack on the market, and I’ve owned many! This is my second set of TracRac ladder rack systems. The first in 2006, and it was still going strong until I sold the truck with the rack on it, and now this one I purchased in 2022. Unfortunately, this will be my last one as it will take me into retirement, but it will live on with the new owner that buys this truck! Thank you for manufacturing such a good quality product. A+++++

No fault of eTrailer - the service was exceptional. It's a great ladder rack - my only issue is that the threads needed to be chased out with a tap to avoid cross threading, which i guess is some feedback for the manufacturer. Looks great on a 2024 Sierra.

Ability to raise and lower the rack is very useful. It allows me to keep the boats as low to the ground/truck cab as possible for easier loading/unloading. I can raise the rear rack and load a motorcycle without removing it. I have removed the endcaps and run straps through the crossbars and was able to load two 17 aluminum canoes at once. Note, the endcaps are a bit delicate and extremely expensive to replace!

I recently made a 4 hour trip home after picking up a new kayak while using the following equipment for the first time: Thule Xsporter Pro Truck Bed Ladder Rack, Thule Hull-A-Port Kayak Carrier w/Tie-Downs - J-Style, Thule Watersports Adapter for Aeroblade/Aeroblade Edge Bars and Thule Bow/Stern Tie-Downs. I'm impressed with the performance of all of those components.

Works seamlessly with the retrax rollup cover and not too hard to install. Adjusting the height takes a little bit of work but that is only done on a very limited basis. Allows me to carry my kayaks, a cargo box if I need extra space or paddles & fishing rods so they don't get damaged by closing the tailgate on them.

I split two rack systems to allow us to carry larger ladders. Outstanding service and info from trainer to help make this happen! CSR reps were great to work with.

The Yakima Outpost HD bed rack is great, strong and sturdy. I would recommend etrailer.com if you are looking for truck accessories. Great customer service!

I think the bottle opener feature advertised should work! I emailed about that shortly after installing the product, even sending photos, and no one from your company every reached back out to me to resolve the issue.

Very sturdy. Great look. Worth the $ in my opinion.

Worked perfect for my 2024 Tundra with a Retrax pro XR tonneau cover. Installation was easy.

I ordered a truck rack Monday Sept 17th just after 8am pacific time. Within an hour I received an e-mail that the order was being processed. A short time later i received an e-mail that the order had shipped . I received my order on Friday the 21st. I have installed the Rack in my truck and it looks great. I am a return customer and would recommend etrailer to anyone in the market for any items they may need. Etrailer your great. Thanks for the fantastic service.

More expensive than other racks but I was impressed with the quality of the components, the directions and even the packaging. I wanted racks that I could adjust as low as possible to ease the loading of kayaks and just clear the cab. These adjust to just about any height you'd want in 3/4 inch increments. My only doubt is whether the C clamps that secure the bases to the bed rails might loosen over time.

Very expensive but very high quality. Getting ready to take my Ranger with the kayaks to Florida behind my Motorhome. Tested on an expressway run before the big trip. Very stable and secure

Yakima product is very solid, as always. The T track adaptors do fit on the t-tracks on my tonneau cover on my '24 GMC Canyon. However, the Yakima t track rubber gasket adaptors do not quite fit the roll-n-lock M series XT tonneau cover I have without modification. I did have to cut down the outside of the rubber gasket as they are too tall, which forced the towers to angle in toward the middle of the truck. Once cut down it fit appropriately. Next, I had to cut the rubber gasket on the bottom of the middle of the tower, which overhangs the cover, as the cover has a lip that did not clear the rubber gasket when opening and closing. However the lip does clear the yakima towers when the rubber is removed so the cover does function normally once the rubber feet are modified. I'm sure yakima would not condone this, but it should not have functional consequences and so still fit my needs.

Service was Unbelievable. Fantastic , couldn’t get any better ther than someone driving a car from wentsville to my house. Thank you all, keep up the good work, I need more stuff.

Yakima products are renowned for their ease of assembly, installation, and sturdy craftsmanship. The BedRock HD does not disappoint in any of these categories. We bought the BedRock HD Truck Bed Rack with the hope that it would make loading/hauling our kayak and SUP more user friendly when used in conjunction with the LongArm Extension. Another factor we considered when purchasing this combo was how securely the watercraft would ride for 10-12 hours of driving time. Though we have yet to make a trip of that length, both watercraft are extremely secure once loaded and strapped down. I am able to make the truck bed sway back and forth when pushing and pulling on the strapped down SUP. I’m confident both craft will be held securely for any duration we intend to drive. Since the 2020 Toyota Tacoma with the 5 ft. bed is somewhat limited on bed space it was important for us to have a set up that would allow us to maximize our truck bed use. With the BedRock HD and LongArm combo we are able to accomplish our goal. There is 19” of clearance between the floor of the truck bed and the bottom of the HD crossbar with pad installed. Without a pad on the crossbar there is 20” of clearance. Plenty of room for our gear totes and cooler. For those interested, I installed the forward-most crossbar/tower assemblies 17.75 inches rearward of the front outside corners of the bed. The rearward-most crossbar/tower assemblies are installed 14.25 inches forward of the rear outside corners of the bed (excluding the top of the tailgate). That gave me a center to center crossbar spread of 28”. The LongArm Extension is bolted with the tee bar at its shortest configuration, and the entire assembly is bolted one hole placement from the vertical position. [See attached photos]

Best online company I've ever dealt with. Website and follow-up outstanding. Great customer service.

Box was broken on delivery I notified them and they told Me if anything was missing that they would take care of it. Come to find out everything was still there. Everything went together perfectly. Thank you for the communication. Look forward to working again with you all in the future

Rack has worked great hauling 20 foot lumber, 17 foot kayaks and standup paddle boards. The only issue I have had is the front cantilever bar over the cab is about 1" from the roof. If I hit a bump in the road it hits the top of the cab. I have a 2004 Dodge Ram 2500 Crew Cab short bed. Wish there was a little more clearance between the cross bar and cab.

Order confirmed on Nov. 28, shipped Nov. 30th Arrived Dec. 2nd. Very pleased with the prompt delivery this time of year. Opened the box and the racks look fantastic. Can’t wait to get them on as I am in the beginning stages of building 12x16 shed, and will need the racks to transport rafters.

I received exactly what I ordered. I am so happy with my purchase, and it will not be the last one either. Great service