Best Chevrolet Traverse Boat Trailer Parts

Trevor W at etrailer was a great help in selecting the correct product for my trailer. The quality and ease of installation updated the trailer to new condition.

I got some before and after pics for you here of my 1988 EZ LOADER carrying a 1991 SeaRay 200-BR.

Trailer guides were easy to install and have done their job for the last year. No issues with salt water corrosion. Hardware has held up well. Based on the slope of some of the boat ramps that I use, a bit longer guides would help in some situations. Overall an excellent product.

Your guy, Dan posts were easy to order and quick to ship. The instructions covered the installation very well. Shortly after installation I used my trailer and found it to be much easier to trailer-up my boat in a swift running river. I found it much easier to drive it on straight, centralize the boat, and pull it out, compared to previously in that river current. The products are good quality and well-made. I would highly recommend them.

I took a fishing trip to Quebec Canada and had to travel 115 kilometers on a dirt rd resulting 5 of my original bunk brackets cracking. The lodge personnel welded them so we could get home. Replaced them with your brackets that are a lot stronger and easy to install. Looking forward to next trip

So far so good. The brackets are working fine so far. Haven't put the trailer on the road yet, but the boat requires bunkers to have a curve or bow in them. The middle brackets stand the torsion as well as the weight of the boat. Easy to install as well.

I can't think of one thing I could want that would be better besides the saleslady Lori coming and installing the glide slides for the 2 pairs and installing the bunks on the trailer. Items are as stated and the quality was better than I could have done it if I bought the wood, cut it and carpeted it. My local trailer place was 2 weeks out and Lori walked me through the shipping process to get the product faster than normal but cheaper than "Next Day". Great advice. I think I found my new trailer store for the next time I need something trailer.

This is my second order of bunk boards from etrailer. Solid products at a better price than I could find elsewhere. Quick delivery, too. This time I replaced two 12 foot boards with four 6 footers, and used a bottom steel plate to lock them together. Working great. (There are still 2 mounting spots for each board.. so I don’t anticipate any issues). These aren’t made with pressure treated lumber, but that’s what I have to use because aluminum pontoons can be damaged by lumber treatment chemicals. Better to be safe than sorry. So I’ve just resolved to myself that replacing my bunk boards will be routine maintenance going forward. Thus far I’m getting at least 4 to 6 years each, and several longer than that. And it’s nice to get reasonably priced replacements from etrailer. (Sure, I could install those fancy synthetic boards and they would last forever. But my trailer has 8 bunk boards, including the two 12 footers. It would be very, very, very expensive. Not worth it. I’ll stick with using etrailer.)

Im converting my v-hull trailer to a pontoon boat trailer. These bunk brackets are essential to the project. They are well built and are sdjustable enough to ensure a perfect fit

Worked perfectly for my application. Had to widen an 8 foot wide trailer to accomodate a 8.5 wide boat. Bolted 2x2 to top of existing frame and then bolted these bolsters to that. Bought 2x2 plastic end caps for the 2x2 and trailer looks like it Was made at the factory this way. Was cheaper than buying a new trailer.

One of my favorite places to fish has always been the worst place to access. There is no ramp, just a low place in the bank. Usually I have to put the boat in as far as I can, pull forward, reverse back and brake, inching the boat closer to the water with each trip. Often it would take 5 to 6 times of this process. This week I installed 2 pairs of the Dutton-Lainson deluxe roller bunks (4'each) on my trailer. When I went fishing this morning, I put the trailer down in the water where I usually do, and then just pressed the out button on my electric winch, and the boat slid off into the water perfectly. I never had to touch the boat. It was AWESOME!! This rates as one of my best upgrades to my fishing experience.

First, the customer service from etrailer.com was outstanding, and the rollers were delivered on time. The rollers are to support a 14-foot flat-bottom jon boat, with no weight of a gas motor on the transom. I saw no need to submerge the trailer to unload or load this light weight boat. Backing the wheels no more than hub-deep in the water is all that is needed for both unloading and loading. I removed the two original 5-foot carpeted wooden bunks and their brackets. The bottom of the boat hull has 5 ribs, sticking down about 3/4”, with about 6 inches of flat space between each rib. Each tripple roller set is just under 5 inches wide, so they fit nicely between the hull ribs and thus guide the hull straight onto the trailer. Knowing that when launching the boat it would quickly roll off the trailer, I attached a cleat to the winch stand to temporarily secure the bow rope when I unhook the winch strap. To load the boat, I attach the winch strap and then move the boat out to the end of the trailer by either walking on the plywood or wading out. Then allign the rib spacing with the rear rollers and winch the boat on. The wood doesn’t get wet; when loaded, the boat shields more than all of it from rain. And I don’t submerge any of the wood at the launch ramp. (Note that carpeted wooden bunks DO get wet when a typical bunk trailer is submerged.)

Quality product with reasonable price. Using for building a lawn striped. Made in USA which is a big plus for me. Excellent communication from trailer throughout the process

Great rollers fast shipping nice people will do business with

I borrowed the idea to use this trailer bracket to mount bunks for a pontoon boat on a usedboat lift I recently purchased. They work just fine, and were less expensive than OEM pontoon system for the lift.

My pontoon boat trailer had wornout bunk brackets and these replacements fit perfect and solved the problem better than original implementation.

Great, quality and easy to use and install.

I bought a 2007 16' Carolina Skiff for $3500 back in December. The dealer said there was nothing at all wrong with it and he went over it and winterized it. I finally got around to putting it in the water and saw that the bunk boards were in terrible shape, with one side rail guide-on falling off. I took it to a marina repair shop and was told it would be cheaper to buy a new trailer instead of replacing the bunk boards. I contacted Ashley at etrailer about buying a set of bunk boards and all of the brackets and hardware for it. $370.00 later I had a full set of bunk boards and guide-ons being shipped to me. I don't think I could find a new trailer for that price. It took longer to remove the old ones than it did to put the new ones on. About 3 hrs later I had a new trailer. These bunk boards and guide-ons fit my boat and trailer perfectly. Thank you Ashley and etrailer for great customer service and a very good product at a really decent price.

Great product! I've replaced my bunks several times over the years with carpet from the big box stores. Always lasts about 2 years, primarily because of wear where the boat slides onto the end of the bunks at the rear of the trailer. This time I decided to try a product that was actually designed for trailer bunks. One year later and my bunks still look great! For just a few dollars more I'm expecting these to last many years. We keep our 24' bow rider in dry storage so we trailer it after every use (weekly in season) and it's gets a lot of wear and tear. We are very happy with this purchase and would recommend this product to anyone looking to replace their trailer bunks!

Easy to cut and attach to the 2x4 bunks I made for my trailer.

Hello George, I receive the package. I am happy with it. I would like to bring to your attention a discrepancy between that packaging and the instructions. The first bullet on the outside of the box indicates to mount the post 2 to 3 inches from the pontoon. The directions inside indicates it to be installed less than 2 inches. I have attached some pictures for you to share with your supplier.

Installation was simple. Unbolts are a little long for my trailer frame but nothing my grinder can’t shorten.

Exceeded my already high expectations. I live in rural Hawaii and my complete boat trailer axle down to tires was delivered within a week of order with reasonable shipping charges.. Local place gave me runaround 3x already. This saved me. Now I can go fishing again! Dimensions and sizing can be difficult, even if you are used to these things but trailer makes it super ez.. With videos and detailed things. Thank you, I will definitely do business again!!!

Etrailer is one of the few places to buy ss bolts. Thank you.

I gotta say that you guys from etrailer.com is a lot cheaper than who I were dealing with ,I am doing a project that it is taking 12 tires like this, I orderd 8 from someone else wished I knew about you guys before I got them other 8, didn't take long to get what I orderd, thanks guys... you are the best, I will give you a 10 star rating if the stars went to 10... thanks again... I took a pic of one of the 12 tires I have, got the roller bearings in one of them..

A++++ **Great Product-Great Company-Great Service**. Would definitely purchase again! Worked great for my pull behind lawn striper I engineered!!! Highly recommended dealing with etrailer!

A perfect solution for supporting the bow of a Jon Boat. When I purchased the boat & trailer, the bow was only supported by a conventional V roller. That would’ve been fine on a V hull boat , but the flat bottom Jon boat needed more support.. This is the perfect solution. It quickly attaches to the trailer tongue & supports a much wider area on the bottom.. Couldn’t be happier. Thank you so much for saving me a hardware hunting headache. Lol Bob

it is exactly what I need to keep the keel off the center frame on the trailer

Make sure you measure your roller diameter along with length and shaft size.

I am very disappointed in the product. II would give them a " 0" start rating if that was an option!!!!! The roller is hollow with cheap inserts at each end. I am not sure they will work, i should have ordered the rollers by CE Smith. If i had not thrown out the box and if was willing to wait a week for CE Smith rollers i would return them. I very highly suggest nobody should order the "yates" rollers". Also thee rollers have "Yates 1200" in raised lettering.... why raised letters? I made be mistake in ordering them.

The roller and bracket for my boat trailer came in a few days before I was expecting them. A pleasant surprise indeed. Parts was exactly as described and fit my boat trailer perfectly. I am very pleased with the assistance I received from the person that took my order along with their service.

My order was filled as requested and received on time. Products I received were good as I expected them to be. This was my first order with etrailer and I will shop again if the need arises. The products I ordered were for making the tongue on a boat trailer. They worked as expected.

I am restoring a 1993 VM trailer that came with a Sanger DXII I recently purchased. I needed to replace the trailer rollers, and found your site had the same exact part that was used by VM originally. I order them and they were delivered in one day. Great availability, price, and service. Thumbs UP! Dave (On Table Rock Lake)

Got your email before I opened the box. Just came today.Sooner than expected. They are the absolute finest black rollers I have ever owned. Match old ones perfectly. If I could only figure out how to fit them on my '65 Scout.

This is the worst service I have ever gotten from etrailer. I only received half of my order and the ones I recived had two left halves.See photo. Still waiting on my other pair of roller brackets.

Husband very pleased..Exactly what he needed for a very old jet ski trailer and stated they were better quality than expected..Quick delivery.. Thank you..

Overall I would say a good product. Maybe not quite rigid enough for my heavier boat, but does its job. I made sleeves for the guides because the pvc tubes were leaving scuff marks on my paint

Exactly what I needed! My boat trailer was too tall for the u-bolts that came with the CE Smith trailer guides but these extra-long bolts worked great. Arrived faster than expected too. Thanks guys!

Check the shaft length on your trailer before ordering. My old shaft was longer. The new one bearly had space for the pal nuts. Had to bend the roller brackets to make it fit..

Perfect replacements for my old worn out rollers.