# 1
Rhino-Rack Ski and Snowboard Carrier - Locking - 6 Pairs of Skis or 4 Boards
Great product at a great price. Fit an adult snowboard, two sets of adult skis (one set stacked, one set side by side because of how close the bindings were to the roof), and a set of youth skis. Fit snug. Only got up to about 73mph on the highway, but no issues. Some normal fluttering on the snowboard/skis. If you have a torque meter to tighten the bolts that's ideal but I didn't. I just got them snug enough to where I pulled back and forth on the rack and it didn't move.
Works awesome with the snowboards, easy to attach/detach, and durable. Locks and holds fine, initial ordering was confusing and hard to figure out since it’s not a package, and had to get individual components. Rhino rack could definitely improve that! Otherwise it would be 5 star.
# 2
Rhino-Rack Ski and Snowboard Carrier - Locking - 4 Pairs of Skis or 2 Boards
Decent rack for the money. The locks are a bit finicky due to the metal/composite combination. They definitely require graphite lubricant regularly. I've only used it with 2 pair of skis and it works well.
Howzit etrailer.com & staff. the rack itself is sturdy and more aero than comparable units. For my 2017 Subaru Crosstrek (OEM) Aero Bars, it was necessary to shim the (rear) lower/leading edge clamp assembly with two 1/8” x 1.5” x 1.5” (EPDM) rubber pads. The bars are shaped like a wing – and these shims helped to level the rear rack with the one in front. Overall - it looks very clean and functional. I might screw on some rubber ends over the ends of the mounting bolt to complete the project. Time to make some turns. Thank you!!
# 3
Rhino-Rack Ski and Fishing Rod Carrier - Locking - 2 Pairs of Skis or 4 Fishing Rods
This rhino product was the perfect solution for me. With a roof rack nearing capacity, I still wanted an accessory for my fishing rods AND ski’s. This rhino product filled that need! Super easy to install in the T-track. Thanks agan!
Last year I purchased Rino ski racks from etrailer and they work great . The hardware fit my roof racks and all the fittings are tight. Ordering was easy. Shipping was fast and I even got a follow up personal email from George a year later asking how I liked them - which was impressive! I would definitely recommend etrailer as an honest and good outdoor gear company!
# 4
Thule SnowPack Ski and Snowboard Carrier - Locking - 6 Pairs of Skis or 4 Boards - Silver
So easy to install onto Thule AeroBlade. Quality materials and convenient design. No significant noise noticeable from wind resistance when driving. etrailer provided great shipment/notification support and was great resource for how-to videos, commentary.
Better than I expected. Only comes with four core locks so be aware of that if you want six like I did. Bought two more locks from Thule with the same key #. Mounted this carrier on my Rhino Rack. Perfect fit and looks great. Would highly recommend.
# 5
Thule SnowPack Extender Ski and Snowboard Carrier - Slide Out - 6 Pairs of Skis or 4 Boards - Silver
Love it!!!!!! Great ski rack replacement for older rack. The extended slide is incredible. The eTrailer support helped me pick the model that worked for my car and crossbars. Another wonderful purchase from my go to source for bike/ski or other related products!
Fits our 4 skis and 1 snowboard, 2 skis are for kids which makes it easier. Slide out is really helpful so we don't have to climb over the car to put things on the rack.
# 6
Yakima FatCat EVO 6 Ski and Snowboard Carrier - Locking - 6 Pairs of Skis or 4 Boards - Black
Just got my Yakima Fatcat EVO 6 ski carrier (black finish) and I am stoked. Note that this is different than the Fatcat 6 (non-EVO, previous generation) carrier. This is my first ski carrier, but I and/or my kids ski about once a week at Alta and Snowbird when the lifts are running, so I expect it to get lots of use. Etrailer shipping was fast and item was packed in a sturdy secondary box. PROS: 1. I love the sturdy build and quality finish of the carrier. 2. The design allows many micro-adjustments to fit to your vehicle and to fit the skis. For instance the spring-loaded hinge on one end and the lock on the other end can naturally accommodate different thickness skis. 3. Carrier has a usable width (i.e. width of skis side by side) of 32.75 inches (832 mm). For those that are not skiing on 75-mm-wide skis from 30 years ago, this carrier might actually allow you to fit 6 pairs! 4. Separate mounting brackets for aero or for square/circle cross bars. The aero brackets fit securely on my Acura/Honda OEM cross bars. The flat part of your skis will be about 3 inches (76 mm) above your cross bars. 5. A built-in lift bracket that lifts by an additional 3 inches (76 mm) the hinged end of the carrier, if you have really tall bindings (I don't think I'll need to use it). 6. The aero brackets use a rubber coated steel strap to wrap under your cross bars. This strap has a quick release cam on one end that can be operated when the carrier is not key-locked. This means you can remove or install the carrier without tools in about 4 minutes, once you've done the initial install-related tuning. While the carrier seems sturdy enough to leave on the vehicle all winter, I expect I'll only install it on ski days. This feature really sets this model apart and for me was its biggest selling point. 7. Yakima packages the carrier in a nice-looking sturdy cardboard box with a flap lid. I can fit the two parts of the carrier in the box, with the brackets/straps still installed, for convenient storage (see picture). CONS: None so far, though I haven't yet actually hauled skis up the mountain! After this ski season is over and eTrailer asks me for a follow-up review, I'll let you know. I'm also thinking about seeing if the ski carrier can be attached to my small hitch-mounted cargo carrier. That would make loading and unloading the skis easier than on the roof.
First off...you can't beat the service of etrailer.com. I was looking for a ski rack for my son's 2012 Subaru Impreza with the factory roof rack (base model not the sport). I could find no reviews of anybody installing one of these on one of those. I took the plunge and will say that I am very happy with the outcome. The installation is a bit tricky and four hands help, but after the first one was installed we had the hang of it and the second one went on very quickly. Even with the expedited shipping this rack was about $50 cheaper than the Subaru ski rack. Again the etrailer.com service is fantastic. I have purchased products here before and will do so again.
# 7
Yakima FatCat EVO 4 Ski and Snowboard Carrier - Locking - 4 Pairs of Skis or 2 Boards
Very well built. I like it so much I purchased the larger EVO 6 model too for when the this one isn't enough.
I actually ended up buying a second set so I can fit a total of 8 pairs of skis on my jeep. I love the quality and ease of installation. It’s an easy to use system and love that my skis are secured.
# 8
Thule SnowPack Ski and Snowboard Carrier - Locking - 6 Pairs of Skis or 4 Boards - Black
This rack easily fits 5 sets of skis for my family. It is FAIRLY easy to take on and off (could be faster if we didn't have to turn turn turn the dials). My biggest complaint is that as soon as my skis are out of it, I HAVE to remove it from my car (SUV). The noise of it empty on my roof is so loud when I am on the highway it is AWFUL! It's like it vibrates my whole car and is super loud. It only does it when there are no skis in it. It is frustrating since it would be way easier just to leave it on all winter taking my skis on and off when we need to, not the entire rack.
Just put this snowboard rack on my 2011 4runner mounted to Thule Aeroblade roof rack. Easy to install and use. Quality seems good. Like the look. No noise issues when driving. No complaints so far. Overall satisfied!
# 9
Thule SnowPack Extender Ski and Snowboard Carrier - Slide Out - 6 Pairs of Skis or 4 Boards - Black
Game changer! I don’t have to climb on the car to put our skis on the rack or take them off. It’s also easy to put the rack on the car and take it off. I’m got sure you could get six pairs of skis on the rack, but I haven’t tried. It’s certainly no problem getting four pairs.
I am so thankful I spent the extra money and ordered the one that pulls out to easily load/unload skies. I’ve had several opportunities where I have had 6 pairs of skies to transport. I have had others approach me to see if I would trade.
# 10
Thule SnowPack Ski and Snowboard Carrier - 4 Pairs of Skis or 2 Boards - Silver
Very nice racks perfect for my fishing rods, I like buying from etrailer there are first class company.
Excellent customer service and tracking. From ordering to delivery, this is the best experience it have ever had with an actual n line order. Highly recommend Looking forward to ordering in the future
# 11
Kuat Grip Ski and Snowboard Carrier - Slide Out - 6 Pairs of Skis or 4 Boards - Black
These rack are great, I have them on both of my SUVs all winter. The etrailer seevice was excellent as well.
Rack works great. Slide out makes loading and unloading much easier. So far we only put five pairs of fat skis on. Might have room for one more pair if I closed the gap between pairs but we didn’t need six pairs for that trip. Only problem was the rack froze up after driving through fresh rain. We had no problems with freezing while driving through salted slush. So far we’ve used it on two longer ski trips to CO from AZ. It’s quiet and strong. We once had a cheaper rack release our top model, expensive, skis onto the highway at 65 mph. That’s why I bought a Kuat.
# 12
Yakima FreshTrack 4 Ski and Snowboard Carrier - Locking - 4 Pairs of Skis or 2 Boards
I love this ski rack and the service I got while making the purchase from etrailer! This rack securely holds up to 4 pair of skis and is super easy to put on and take off of the roof. I would highly recommend this rack to anyone. I would also highly recommend purchasing this product and any other rooftop rack needs from etrailer
We added two more racks to the two we already had on our Jeep. Easy to install and use
# 13
Rhino-Rack Ski and Snowboard Carrier - Locking - 3 Pairs of Skis or 2 Boards
etrailer ships fast and has great prices! While the rhino track is plastic and not fancy, I’m able to attach 2 snowboards and it works. You have to help it with the hand to get it aligned to lock (maybe due to new stuff rubbers?) but I’m pretty happy and took about 15 minutes to install. If you want something on the cheaper side, this is a great option and these guys will ship FAST
We bought these to go alongside a roof box and they work great, freeing up space in the roof box for all the other stuff you need for skiing. They are sturdy, don't wobble on our Thule bars, and the lock mechanism works well. They would fit 3 pair of x-country or narrow alpine skis; with wider alpine skis you only get 2 pair (there is about 300mm of room on the rack and while many skis are <100mm underfoot, they are 15-35mm wider at the widest part so you can only fit 2 pair).
# 14
Inno Ski and Snowboard Roof Rack - Dual Angle - Locking - 6 Pairs of Skis or 4 Boards
# 15
SeaSucker Ski and Snowboard Carrier - Vacuum Cup Mounted - 4 Pairs of Skis or 2 Boards
Quite an amazing product. When it arrives, you think, "Oh man, how is this going to make it the whole trip?" But I can tell you that I traveled from Fort Worth to A-basin/Keystone and back with no issues. That's 1640 miles there and back at speeds up to 85 mph and at least 3 of the world's climate zones on just this one trip. It is best practice to give each of the suction plungers a few taps every time you gas up, but I forgot a few times and it still caused no issues. Simple assembly with 4 suction cups and 2 of the high-density plastic racks that connect to each other with an included alan key and headless screw. Also includes the high tension straps you'll need to fasten skis/boards at the front and rear of your gear. When I say this rack was solid, I mean like I'd touch it to test for stability while driving and gassing up and it felt like it was sitting in hardened cement. Absolutely rock solid. And, there's a spare strap and plunger included. A couple minor things worth noting (but none of these could justify taking away from the 5-star rating I gave this product): - The suction cups require a clean surface, so don't take this lightly. I took mine to a car wash right before mounting. - The clean surface must also be smooth and seamless. I didn't notice until I started mounting that my truck has a grooved roof, so I had to put 1 rack on the bed cap roof. It worked great. - I wish there was an option just for skis b/c these racks were about 1" too tall to fit in the garage while mounted to the roof, and it's obvious the height of this product is to also accommodate snowboarders. Like I said, minor stuff. 5-stars all the way. You won't regret it!
After using this rack for a whole season, I’m very satisfied with it. Works exactly as expected. Very unique design that allows me to carry 2 boards on any car. You might be able to squeeze 4 if you can line it up so the bindings don’t touch. You do have to be careful mounting the rack on your car to make it stick. It’s important to wipe any dirt off and moisten your roof with a little mist of water, but after you do that it sticks really well. No problem driving 70-80mph with it. I really like having a sunroof to mount the front suction cup on because it allows me to watch the vacuum gauges to make sure that the rack is firmly attached from inside my car. So thankful to seasucker for making a product for those of us who drive sports cars and ski/board!
# 16
Yakima FreshTrack 6 Ski and Snowboard Carrier - Locking - 6 Pairs of Skis or 4 Boards
Looks great on the vehicle. Had a little struggle tightening onto the cross bars but adapted and overcame!
It's a ski rack so its not all that exciting. I like that it is small for storage reasons when not using it. The fastening system to my Toyota Highlander factory rack is secure but a little cumbersome to apply and take off. I like to take it off when not using it to preserve my gas mileage. The boards and skis fit fine although they are stacked in order to get 4 peoples worth of equipment up there. A small price to pay for their compact size on the roof or in the garage.
# 17
Kuat Switch 6 Ski and Snowboard Carrier - 6 Pairs of Skis or 4 Boards
Been a great purchase. Fits 4 pairs of skis and a snowboard with room to spare. Could probably fit 2 boards and 3 pairs of skis easy.
Excellent ski rack. I purchased because I wanted absolutely no noise. This thing is super quiet went flipped up or down. Love the looks of it flipped down. Absolutely no complaints. Easy to use and set up.
# 18
Inno Gravity Ski and Snowboard Carrier - Clamp On - Locking - 3 Pairs of Fat Skis or 2 Boards
Easy to setup. Installing and removing is very easy.
Great product, can fit 2 pairs of wide powder skis and poles in easily. No issues, left the carrier on year round
# 19
Kuat Grip Ski and Snowboard Carrier - Slide Out - 6 Pairs of Skis or 4 Boards - Gray
Rivian R1T - easy install and great looks. Works fine with the Rivian crossbars. The slide out is a nice feature! etrailer - great, great customer service! I had issues with delivery and you were there. You answered my emails promptly and was able to resolve it quickly. Amazing!
This is a fantastic rack. Had it all last winter. Not only did it keep our skis secure, it looked great doing it - I got a lot of people asking about it when they saw me using it in the parking lot. The slide out feature is very handy once you get the hang of it. We did encounter issues with the slide out trays getting stuck with ice several times (I'm in the cold and wet NE) but I was able to work them free. We also had locks freeze up to the point where you couldn't get the key into the bolt to lock/unlock, which was annoying. Kuat support was great in sending new lock bolts when this happened though. I think the locks might need some weatherproofing to account for rain/snow getting in and freezing up the components, then allowing corrosion to set in and seize everything up. But no regrets! I have this and the Base rack for our bikes in the warmer months, so there's kuat on my vehicle all year round now.
# 20
Kuat Grip Ski and Snowboard Carrier - Slide Out - 4 Pairs of Skis or 2 Boards - Black
Installing the Thule WingBar Evo Roof Rack for Naked Roofs on your 2019 Acura MDX
Hey, everybody Zach here at etrailer.com. Today we're taking a look at the Thule EVO WingBar EVO Roof Rack system on our 2019 Acura MDX. Roof racks are a really great way to get a lot of different things on top of your roof. Whether you're looking to carry a cargo box or a roof basket to free up some space inside your vehicle on a trip, or you're looking to carry kayaks, skis and snowboards or bikes, this one's going to be a really good option because we're getting 53 inches of crossbar space. We've got a lot of distance there to get accessories on here, but we also have a 220 pound load capacity. That's pretty significant amount of weight you're putting up on top of your roof.
Yakima JetStream Crossbars Installation - 2016 Acura MDX
Speaker 1: Today in our 2016 Acura MDX, we'll be taking a look at and showing you how to install the Yakima roof rack system. This is going to consist of part numbers Y00426, those are going to be our Yakima JetStream crossbars, part number Y00146, those are our BaseLine towers, and part numbers Y06150, and Y06105. Those will be our BaseClip fit kits for our Acura MDX.The Yakima roof rack system is a great solution for carrying your vehicle accessories on your vehicle's naked roof, whether those are bike racks, cargo baskets, or ski and snowboard carriers. The Yakima JetStream crossbars are an aerodynamic crossbar that's going to help to reduce wind noise and drag.If we remove our end cap, you'll see our weather strip on the inside. This can easily be pushed down and used with channel-mounted accessories. So you don't have to worry about taking our weather strip out, or cutting it down.
Yakima Roof Rack Review - 2016 Acura MDX
Speaker 1: Today on our 2016 Acura MDX we're gonna be test fitting the Yakima CoreBar Roof Rack System. These are the Yakima crossbars, 60" long; these are the baseline towers; and this is the clip fit kit for the Acura MDX.The Yakima CoreBar Roof Rack System is great for carrying a wide variety of accessories on your roof, or freeing up space inside your vehicle. It can carry bike racks, cargo baskets, cargo boxes, as well as ski and snowboard carriers, and kayak carriers. The two bars have a combined carrying capacity of 220 pounds, although you always have to double check with your vehicle's manual to make sure your roof can withstand that weight. And at our end caps here we have these knockouts, which you can replace with the Yakima Same Key System, so both your accessories and your roof rack can be keyed alike and secured to your vehicle.Now that we've gone over some of the features of the roof rack system, let's go ahead and show you how it installs. We already have our front bar installed on our vehicle, and we have our rear bar partially assembled.
How to Install: Inno Aero Roof Rack for Naked Roofs on your 2016 Acura MDX
Speaker 1: Today on our 2016 Acura MDX we'll be taking a look at and showing you how to install the Inno Roof Rack System. This is going to consist of the Inno Aero Crossbars measuring 60 inches long, with part number INXB153-2, the Inno Through Feet for Aero cross bars, part number INXS250 and the custom fit kit for our MDX, part number INK656.The Inno roof rack system, like most others, allows you to carry bike racks, kayak carriers and cargo baskets on your roof, and still have that aerodynamic shape that helps to reduce wind noise and drag. The Inno bars are also going to have the weather strip like most other cross bars. The only difference is that this one will push down and work with your channel mounted accessories, where others you actually have to remove that weather strip and cut it down. This is going to be easy to install. It's going to clamp around our door frame and lock into place.
Fit Verified: Custom DK Fit Kit for 4 Rhino-Rack 2500 Series Roof Rack Legs on a 2016 Acura MDX
Today on our 2016 Acura MDX we'll be doing a test fit of the Rhino-Rack Vortex Aero Crossbar System, using part numbers RRVA137B-2 for the 54" Black Aluminum Crossbars, and then part number RRRLKVA for the 2500 Series Leg Kits, and then part number DK400 for the clamps and the pads. We've already got the front one installed as you can see here. We followed our instructions, we came from the door jam over to the center, we measured out the distance and how far we're supposed to be for our legs underneath the bars, and then we tightened everything up, and we got it. So let's go ahead and do the rear one together. First thing we'll do is we'll grab the leg first, and then our pad. We want to make sure that the arrow is pointing out, so away, and then we're going to push that on the bottom. Make sure that it seats all the way around.
Fit Check: Testing Yakima RoundBar Crossbars on a 2016 Acura MDX
Today on our 2016 Acura MDX, we're going to be doing a test fit of the Yakima roof rack system. It's going to be part number Y00409, Y00124, and finally part number Y00731. As you can see, we've already got the first one up on the vehicle. That's going to be spaced off that front windshield 6" with an inside measurement from each Q Tower of 48". We'll explain how the second one goes together and the final measurements you need to make. The bar here is going to be your part number Y00409. You're going to have your Q Towers, which are going to be part number Y00124; and then finally, your fit kit for the vehicle specific, which is going to be part number Y00731. As you can see, we've already got one side on.
Rhino Rack Roof Rack Review - 2011 Acura MDX
Today on our 2011 Acura MDX we're doing a test fit of the Rhino Rack RS2500 series roof rack system. These are vortex aero cross bars. The part number for this is RRRS475B. Now this is the whole kit that fits our Acura here. It comes with our cross bars and our foot pack attached to each other and then our fit kit. We already have our front one installed, we're going to show you how to install our back one here.
Rhino Rack Roof Rack Review - 2011 Acura MDX DK173
Today on our 2011 Acura MDX, we're doing a test fit of the Rhino-Rack Vortex Aero Crossbars. The part number for our crossbars today is RRVA137B-2. For the foot pack we're using it's RRRLKVA. For our fit kit for our MDX, we're using DK173. We already have our front bar in place, as you can see there. We've got our one foot pack here installed and in place. We're going to do our other one on the other side.
Thule Traverse Roof Rack Installation - 2009 Acura MDX
Today on this 2009 Acura MDX we will be test fitting a Thule Traverse Roof Rack. We already have the load bars and foot pack assembled per the instructions, so we will go ahead and show you how it looks on the vehicle. First well open the car doors and place the first load bar onto the vehicle facing the front, positioning them close to the windshield. Next we measure from the end of the windshield to the edge of the foot pack, that should be 10 for this particular install. Once thats measured out on both sides you want to check and make sure the load bar is centered on the vehicle. Now we will snug them down and lock them into place using the provided Accue Tight measuring tool.
Thule Roof Rack Review - 2007 Acura MDX
Today on our 2007 Accra NDX, we're going to be doing a test fit of the Tuley Arrow Blade Refrac system like the one up here on top of the vehicle that we've already installed. We're going to go through on how to install the back one, and a few measurements along the way. These are going to be part number THARb60 for your arrow blade, TH480R for your pedestals, and for your fit kit for the vehicle specific, it's going to be THKIT1549. We'll also be using the included tool, which is your accutight tensioner and Allan key, and a piece of tape rule. We'll go ahead and flip it over, and I'll show you what we got going on here. This is what it will look like, once it's installed onto our bar. With your clip here, that's going to clip underneath your windowsill, your rubber mat which is part of that kit, as well, that's going to sit down on top of the pane to protect it.
Thule Traverse Roof Rack Installation - 2007 Acura MDX
Today we are going to show you how the Thule Traverse roof rack system looks and fits on a 2007 Acura MDX. First thing we are going to want to do is go ahead and open up the doors on our MDX and then we will take the pre-assembled crossbars and go ahead and set them into position. Now we have the front crossbar set in place we want to just make sure that it is in its proper position and to do that we are actually going to take a tape measure and we want to measure out from the top edge of the windshield to the front end of the foot pack and on this particular vehicle that measurement is going to be 10 inches. Once we have ensured that dimension is set we can go ahead and tighten our foot pack down using the provided one torque tool which helps take the guesswork out of how tight you need to get the foot pack. Okay just go ahead and close the lid on our foot packs and we will go ahead and move on to the rear crossbar and we are going to repeat the same setup for the rear crossbar. :50
What our customers are saying:
"In these days of customer "no service" I am usually disapointed when doing business with people I don't know. It was refreshing doing business with you. I'm impressed!"