Most Popular Work for 2023 Ford Ranger

Very easy to put together, seems sturdy and well made.

Very well built, heavy duty, high quality.

They look decent enough and do exactly what I need. Super easy install. I think I'll be able to remove the rear one(4 nuts with a zip gun) slide my KLR 650 in the bed put the rear one back on load the canoe and scoot down the highway in my 2011 Ranger. Super happy with these at this price point.

I used the ladder rack as part of my roof top tent trailer build. The rack is awesome. I was able to install it so the top is further apart than the bottom so the tent would attach properly. Very well made. And as usual the customer service was excellent. Thanks Hally C.

The quality and ease of installation was great. Very nice rack!!!

Easy website to navigate, great help videos that made the buying decisions and the installation seamless.

Fantastic experience from ordering to receiving my new Thule Trac Rac system. My package was delivered quickly and without any damage. The installation instructions were clear and simple to follow. I’m very happy with my new rack system

Rack has been stable with a 250# RoofNest tent installed.

Install wasn’t horrible but I can’t imagine removing it often. The stops naturally don’t slide on the rail but can be relocated without tools which is nice. Seems sturdy. The cons, it’s steel and has started rusting after two weeks in places the paint wore off during install. I will have to clean it up and repaint it to keep it from looking horrible. In addition, the J bolts sit pretty far off the side of my 2007 F150 so the bracket is hanging off the rim inside about an invh. Once all together it doesn’t seem to matter but would be more comfortable if it sat tight. Overall, it gets the job done but if looking for pretty, get something that doesn’t rust.

The product itself is of good quality. It is a heavy duty truck rack. They say it is adjustable but that is only if you have the wrenches with you. It took several hours to assemble it alone. The bolts need to be a little longer especially on the mounting sleeves and the top of the cross bars. The sliding mounts were quite difficult putting on as the sleeves were very tight, I recommend WD - 40. When it was to the point of installing the cross bars it was necessary to loosen the mounting sleeves and move them. I called customer service and sent several e-mails and received no responses . I plan on using it to carry my kayaks while pulling a travel trailer.

I have owned this for a year now installed on my 2023 Ford Ranger and works great. Would definitely purchase from etrailer again in the future.

Delivery was fast as usual. The installation does take a couple hours and is much easier with a second set of hands. I have a drop in bed liner on my F150 so I did have to do some cutting but my oscillating tool made that a quick modification. Make sure to use the no seize on the bolts so they don't heat up when cranking them into place. Lastly, there are NO drain holes in the bottom of the tubes and believe me they do fill with water and ice in cold temps. I drilled two 1/2 in. holes in the sides at the bottom so they can drain but if I realized there were no weep holes I would have drilled a hole in the bottom of each before installation. After drilling the hole, make sure to coat with a primer and some paint to prevent rusting. Other than what I encountered they will serve their purpose and seem good overall.

I’ve been using this ladder rack for a year now and it has stood the test of time. I love the ability to remove the arms when I’m not using them so my tonneau cover can be closed. Highly recommended for the occasional need for a tough ladder rack.

Excellent packaging, great quality and simple to install. Should last for years.

Works seamlessly with the retrax rollup cover and not too hard to install. Adjusting the height takes a little bit of work but that is only done on a very limited basis. Allows me to carry my kayaks, a cargo box if I need extra space or paddles & fishing rods so they don't get damaged by closing the tailgate on them.

Easy to install

Very sturdy. Great look. Worth the $ in my opinion.

Very expensive but very high quality. Getting ready to take my Ranger with the kayaks to Florida behind my Motorhome. Tested on an expressway run before the big trip. Very stable and secure

Yakima product is very solid, as always. The T track adaptors do fit on the t-tracks on my tonneau cover on my '24 GMC Canyon. However, the Yakima t track rubber gasket adaptors do not quite fit the roll-n-lock M series XT tonneau cover I have without modification. I did have to cut down the outside of the rubber gasket as they are too tall, which forced the towers to angle in toward the middle of the truck. Once cut down it fit appropriately. Next, I had to cut the rubber gasket on the bottom of the middle of the tower, which overhangs the cover, as the cover has a lip that did not clear the rubber gasket when opening and closing. However the lip does clear the yakima towers when the rubber is removed so the cover does function normally once the rubber feet are modified. I'm sure yakima would not condone this, but it should not have functional consequences and so still fit my needs.

Box was broken on delivery I notified them and they told Me if anything was missing that they would take care of it. Come to find out everything was still there. Everything went together perfectly. Thank you for the communication. Look forward to working again with you all in the future

Rack has worked great hauling 20 foot lumber, 17 foot kayaks and standup paddle boards. The only issue I have had is the front cantilever bar over the cab is about 1" from the roof. If I hit a bump in the road it hits the top of the cab. I have a 2004 Dodge Ram 2500 Crew Cab short bed. Wish there was a little more clearance between the cross bar and cab.

Order confirmed on Nov. 28, shipped Nov. 30th Arrived Dec. 2nd. Very pleased with the prompt delivery this time of year. Opened the box and the racks look fantastic. Can’t wait to get them on as I am in the beginning stages of building 12x16 shed, and will need the racks to transport rafters.

I received exactly what I ordered. I am so happy with my purchase, and it will not be the last one either. Great service

Very heavy duty ladder rack that does not "whistle" while you drive down the road. Easy install overall, and it is very easy to install and remove the racks as needed after the original install. At the time of purchase this was not available for my vehicle with a short 5.5' bed, but with very minor fabrication the rails for longer beds fit perfectly. I have recommended this rack to several people since purchased a year ago.

Great product! Packaging could be better for the larger pieces (rub marks). My 2018 Ram 1500 quad cab came with some small challenges that I had to solve myself. No videos or written words available. Basically if your bed rails are covered with a bed liner you need to remove the plastic sleeve in the rear stake pockets. Otherwise you won’t get an equal spacing from one rail to the other. You will also need to use the provided rubber tape with the wedges in order to make the rails level. Otherwise it went together great.

Didn't fit my truck waste of time and money

Great rack! Super stout. Works perfect in my 2008 Sierra.

Absolute garbage. This is my second one in two years that has broke. 1st one broke the welds where the legs meet the actual rack. etrailer was kind enough to replace it under warranty. I shipped it to them and UPS lost it. Out $xxx due to UPS. I go ahead and buy a second one assuming I just received a faulty one. A little over a year later, same issue. Ladder rack is unusable. I have never put more than 300lbs on the rack. etrailer's customer support is excellent. This product is garbage though. Luckily I caught it before it broke off while driving potentially killing someone.

I give etrailer five stars.Great company,Great people,fast shipping However for the buyers products over the cab ladder rack I could only give four The rack is great Good welds and pretty easy to assemble.The instructions are a bit vague The picture on the box itself was actually what I ended up using instead.Also the bolts need to be bagged and tagged separately,rather than just all thrown into one giant bag to be sorted out.Do not be scared of this one,it is very easy to figure out