Best 2021 Forest River Cherokee Grey Wolf Travel Trailer Trailer Lights

Terrific upgrade in my opinion. The installation was pretty easy for me. The light is slightly smaller than the original and I have the corrugated sheet metal siding I did not experience any led hyper flash with this light. I was slightly concerned about this after seeing videos of people changing to led light bulbs on the tow vehicle. This light was plug and play. 4 stars because the manufacturer did not provide a wiring diagram :( I don’t feel you should guess what wire goes where. The least they could do is tell you what they (the manufacturer) wired for ground. In my case, the white was ground, same as my trailer wiring. However I needed to connect green to black to get my turn signal to work. Your situation may be different. Would I buy it again? At this time, yes. I’m hoping this light outlasts my usage of this travel trailer- which should be for many years.

I ordered both the RVSTLB0060 and the RVSTLB0061. My only disappointment with the RVSTLB0061 was the LED module was not attached to the frame like the RVSTLB0060. Luckily, I had two small sheet metal screws I could use to secure the LED to the frame mount. My installation was on a 2016 Rockwood A212HW. The OEM lights were the Optronics incandescent version. RVSTLB0060/61 are direct replacements except for the odd (offset) drill pattern used during factory assembly (they did not use all the Optronic predrilled holes). OEM mounting screws were reused but I added a bead of glue to the threads to help secure over time. Note the factory uses a good bit of RTV silicon on the top portion of the light frame to help hold in place and fit the slight curve of the body.

Product was exactly as described. It worked perfectly. LEDs work much better than the old incandescent.

The web page was easy to navigate, the product was exactly as described and the shipping (normal) was crazy fast!!

Received the tail light in a short time. Price was the best. Will order from etrailer again.

Standard incandescent tail lights.. painted my 2018 Dutchman lite. We downsized from a 45’ Class due to age a medical needs. Like the ease of small trailer but miss terribly the luxury of my class A. We’re planning on much closer destinations. E trailer and I go back over 14 years. They are knowledgeable and rarely make mistakes causing you time going down the road# 1 ??

The light has no apparent mounting method. No screw or bolt holes. Can’t drill mounting holes without removing the lens, which appears to be unremovable.Makes sense, it’s watertight. No instructions at all. My previous purchases at strainer have always been satisfactory, at the very least. I’ll have to return this one.

Fit well. On the boat trailer. Sealed well. I would purchase again

Great replacement lights for my camper. Perfect fit and well designed.

These are very bright compared to the old 12 volt, single-bulb varieties they replaced. Easy to mount and I recommend them.

Delivery was so very slow that I don't have time to install before I leave on a trip with the trailer tomorrow. the light inside is halogen not LED. I was guided on my selection by one of your employees, polite but got it wrong.

I couldn't find taillights for a 50 year old Shasta travel trailer,so I bought these. The wiring is little different but these will work.

Item arrived in neat packaging. Was as described. I installed same day on my travel trailer. Now I have better visible marker lights.stock lights were dim at best, these lights are far brighter. Service and follow through from Etrailer is truly the best.

Nice LED upgrade to trailer, easy installation

Replaced all the clearance/marker lights on my 2007 RV. Nice upgrade to the LED and very easy installation.

I bought this to replace a broken original marker light on our 1995 motorhome. Pros - LED, sleeker look than original, easy to wire if you are familiar with wiring lights for vehicles/trailers, priced better than incandescent. Cons - The screw holes are closer together than my original fixture but I drilled a new pilot hole for the second screw and it was fine, the light sticks out further than the original, and I don’t like squatting or kneeling in order to fix things, anymore (but that’s just a reflection on me and not the light).

First unit arrived broken and was replaced by etrailer no problems. Many thanks to everyone at etrailer.

Lights are great. The packaging on the other hand was atrocious. 13 light tossed in a box with no packaging the keep them from banging into each other. Lenses all had minor scratches that could have been avoided with a little bit of care.

just what I needed--- easy installation, just remove the old light strip, put the new one in place , make your electrical connection, good to go---no special tools, you do need a stepladder to get up to the work area

Good product and lights up well. The glue could be a bit stronger than it is. Had a couple parts of the strips come loose when the weather got warm.

Tail light delivered on time and easy to install . LED’s much brighter and visible than the original incandescent bulb. Nice lights!

I don't typically do this but when you purchase a $55 light one would think it would come with hardware. To all those who may be considering this light as a replacement for your current light keep the old screws you'll need them.

All I really needed was the lens but I ordered the whole light to have spare parts. Fits perfect.

Simple install if you have wiring skills. Perfect fit

The passenger side never worked. Right straight out of the box it was trash. Would've returned them but waited too long to install them so I couldn't return them.

Lights are great. The packaging on the other hand was atrocious. 13 light tossed in a box with no packaging the keep them from banging into each other. Lenses all had minor scratches that could have been avoided with a little bit of care.

The light assemblys ordered were back ordered but shipped to me as soon as they were available. The fit was perfect. Had some problems with the wiring,the coach had 8 wires and the assy had 6. Once figured out the install went quickly. Perfect match.

Command Triple LED Tail Light Review They work great once they are installed. I have 2002 Gulf Stream Ultra on a Ford E450 Frame. The problem is the actual installation. Command does not include install instructions. What may needed if converting from incandescent bulb to a LED system is a 12 Volt 50 Watt 6 Ohm resistor. Installing a resistor parallel between the Brake/signal and Common wire will be necessary to overcome the hyper-flasher bulb out detection system. This high power resistor needs to be mounted on a metal surface to help disapate the heat created. In my case, I mounted the resistor to 3/4 metal pipe banding. The resistor was suspended so that is would have great air flow. Furthermore, size of the light should be slightly larger than 14 w x 6 7/8 . In my case the tail light was not big enough to cover the old light screw holes. I made this work by centering the light and using lap sealant as a finishing water proof bead. After a long road trip and many signal turns and brake presses the tail lights do look and work great.