# 1
Curt Ball Mount for 2" Hitches - 1" Rise, 2-1/4" Drop - 7-5/8" Long - 7,500 lbs
Ball mount arrived with clean welds and smooth powder coat finish that matched the trailer hitch receiver. Mount fits snug in the receiver and provides excellent, printed weight limits to assure safe use. Will be used for utility trailer and possibly a small tent trailer suitable for the weight and pulling power for my Subaru Forester.
I run a small camper dealership, Road Trip Camping, that specializes in small, compact, and lightweight little campers that can be towed by one's existing vehicle. I have been using etrailer.com for over a year now and am very happy with their service. Not only do they typically have anything I ever need, but they are very informed about their products and how to install them. Just a quick call to them, and I get all the answers I need. They are extremely good about product knowledge and customer service. I highly recommend them to anyone looking for trailer products and accessories.
# 2
Curt Class III Ball Mount with 2" Ball - 2" Drop - 7,500 lbs
Quality products. The hitch and wiring harness installed easily because of the quality detailed installation videos you provided. I couldn't be happier. I saved $ 300 by doing the installation myself. I plan on using the hitch for a bicycle rack and to pull a motorcyle trailor. Since I don't have a pickup it is really convenient to be able to tow a utility trailor when needed. Thanks etrailer! You have a good thing going. Keep up the good work.
This hitch was installed on my 2015 Subaru Forester 2.5i Limited. The website is fantastic and makes finding the correct products for your vehicle very easy. The hitch arrived in only a few days and came complete with all the necessary installation accessories. The hitch comes with fish wire for the frame bolts so you don't need to fuss with buying fish wire. Some reviews stated that you can go in from the inside of the vehicle but this is totally unnecessary and more work. Just follow the instructions, with exception of the muffler heat shield. You can drill 1/2" holes through the heat shield in the dimpled areas corresponding to where the instructions tell you to cut out the heat shield (see some of the other reviews for more detail on this). These holes allow you to securely fasten the heat shield over the hitch using the hitch bolts. Make sure you have a torque wrench and an 11/16" deep socket to tighten the frame bolts. I would also recommend removing the muffler which is very simple. Lube the muffler mounts with WD-40 to facilitate the removal of the muffler. You will save at least $300 installing this yourself.
# 3
Curt Class II Drawbar - 3/8" Rise, 1" Drop - 7-13/16" Long - 3,500 lbs
The hitch works great and it was delivered FAST. I was very happy with the purchase. It was cake to install.
Great service, very prompt, with good customer contact and follow-up.
# 4
Curt Class II Drawbar - 3/4" Rise, 1-1/4" Drop - 9-3/4" Long - 3,500 lbs
I purchased a Curt class II hitch for my wifes subaru. I recieved it right away and the installation was a breeze. There was a simple little piece of two sided tape missing from the light wire kit. I called etrailer and George sent it to me that day. Service after the sale is what makes a good company great. I couldn't be happier. Thanks alot etrailer!
This trailer hitch was easy to install. I am eighty six years and a disabled Vet. I took my time and had it on in one and half hours. I also installed the heat deflector back on. I think this heat deflector should be reinstalled as the muffler creates a lot of heat. Saved a lot of money also as the dealer here wanted $500.00 for the hitch $60.00 for the wiring and half day to install. Thought he had a sucker but I didn't bite. Thanks much George J
# 5
Curt Class II Drawbar - 2-5/8" Rise, 3-1/4" Drop - 7-1/4" Long - 3,500 lbs
This got installed on my wife's Forester and we have used it several times for pulling a utility trailer and also for pulling our dock and raft at our camp. Very happy with the options it offers for moving more than fits in the car. Since the Forester had the dual exhaust, i did cheat and have my mechanic do the install. He did it within the hour that is advertised, but did say it would have been a bit of a challenge working at ground level. I think I still ended up paying less in total than going to a hitch installer overall, very happy with the hitch, wiring harness, and drawbar. It's especially nice to have the harness tucked away, as it doesn't get used that often.
Item was as stated and fit receiver perfectly. I used this to get my 30 year old tilt bed trailer to the correct height for my Subaru, as I no longer have a pickup truck.
# 6
Curt Towing Starter Kit for 1-1/4" Hitches - 2" Ball - 3/4" Rise - 3,500 lbs
# 7
Curt Class II Drawbar - 5" Rise - 9-5/8" Long - 3,500 lbs
The 5" rise works very well on an '07 Subaru Forester to level out a utility trailer with 12" wheels. Shipping was prompt as well.
Well made, heavy duty hitch. Fit the Curt hitch on my 2007 Forester perfectly.
# 8
Curt Class II Euro Style Drawbar with 2" Ball - 2-3/4" Rise - 3,500 lbs
I like that this design keeps trailers level rather than pitched forward for my 2007 Subaru Forester. Seems incredibly strong because of its weight and being one piece.
It is heavy duty and well-built. I am not disappointed at all and I get comments everyone smile from people who are used to traveling overseas asking where I got the European style hitch from. The only downside is the lack of interchangeability in the size of the ball itself but I don’t think that’s a big deal because I set it up for what I need it for and keep a vehicle vehicle for longer periods of time.
# 9
Curt Class II Drawbar - 2-5/8" Rise, 3-1/4" Drop - 9-3/8" Long - 3,500 lbs
Item shipped fast and exactly as described. No hesitation in ordering again from this company. Thanks.
I needed to tow a trailer with a 2" ball. My original ball mount has a 1 7/8" ball installed. I had previously tried to change a ball on a hitch and destroyed the nut and damaged the underside of the ball mount. The lock washer had done a great job in keeping the nut from coming off. I dreaded trying to remove my 1 7/8" ball to install a new one that I would only use once. I decided to buy a new ball mount and mount the new 2" ball. This ball mount is so inexpensive that I realized I could have both ball sizes permanently mounted for use in either ball size.
# 10
Curt Multipurpose Ball Mount with 2" Receiver for Bike Racks and Cargo Carriers - 7,500 lbs
Needed something to raise the hitch carrier on our subaru forester to clear the tailpipes. This was the ticket. Super fast shipping from etrailer and curt makes a sturdy, well finished product.
We sold our small motor home and purchased a small travel trailer. This hitch provided a perfect solution to how to use our bike rack while towing the trailer. It even allows room for the pickup tailgate to be lowered without removing the bikes from the rack. The hitch is very hefty with a high weight limit - plenty for the GVW of the trailer (7,000#) plus 125# of rack and bikes.
# 11
Curt Class II Euro Style Drawbar with 2" Ball - 3-1/8" Rise - 3,500 lbs
This hitch has worked perfectly on my Subaru for over a year now. Last summer I pulled my tear drop trailer around the country with no problems and the finish on the hitch still looks like new. I would recommend this hitch to a friend.
Not as versatile as a traditional hitch mount and ball, but much neater if it happens to fit your needs. This fits my Subaru Outback perfectly and places the ball at the ideal height for my trailer. One piece means one less thing to fail.
# 12
Curt Drawbar for 1-1/4" Hitches - 3-1/8" Rise - 9-1/4" Long - 3,500 lbs
etrailer has what you need
I would give five stars but due to what looks like packaging problems the hitch came very marred and the coating chipping off.
# 13
Ball Mount 3/4" Rise or 2" Drop - 12-5/8" Long
This ball mount is stout! And it's powder coated! This guy will last longer than the vehicle, or maybe me.
Retail type stores only carry mainstream items so when I needed a special length ball mount for my 2011 Traverse I found the size and quality with Curt Products .
# 14
Curt Class II Euro Style Drawbar with 2" Ball - 2-5/8" Rise - 3,500 lbs
My Mini Cooper is lowered and this unit really helped level out the trailer I am pulling. The product is heavy and solid. I would definitely recommend this item
Heavy duty! I was a little bummed when I found out how much more difficult it was to find a half inch pin for this, but no matter. It is a tad loose inside the hitch, so there's a little rattle, but I doubt it's as noticable as I make it seem. Super classy and a welcome change from the typical draw bar style. Goes great with my Volvo V70 T5. Thanks etrailer.com!
# 15
Curt Class II Drawbar - 5" Rise - 11-5/8" Long - 3,500 lbs
Hitch is solid and install was 2 hours
# 16
Curt Class II Drawbar - 3/4" Rise, 1-1/4" Drop - 6-3/4" Long - 3,500 lbs
Etrailer is great. Good service!
# 17
Curt Class II Euro Style Drawbar with 1-7/8" Ball - 4-5/8" Rise - 3,500 lbs
Love this hitch. It looks and fits my Optima perfectly. I was really pleased to find a modern looking hitch to fit on my car. Very strong, solid construction. I don't plan to pull a large trailer with my car but this will work perfectly for my utility trailer. Very friendly and helpful customer service and it was delivered faster than I hoped for. Extremely pleased. Thanks...
Perfect for my Honda Fit as it has a low carriage, the Euro shape gave me a few extra inches to tow a small trailer across the country from Oregon to North Carolina with no issues.
# 18
Curt Class III Ball Mount with 1-7/8" Ball - 2" Drop - 3,500 lbs
This is the third time I've purchased from etrailer and have been very happy with the quality of their merchandise, the price and the speed of delivery. The website is tops. There's no surprises about anything they sell. Clear photos, complete spec's and fabulous installation videos. This is a first class organization from start to finish for the customer. If you're not a customer yet... you will be before long!!
Very pleased with etrailer. Very easy to order from website. Fast delivery, easy to install ,perfect fit . Thanks. .
# 19
Curt Fusion Ball Mount for 2" Hitches - 2" Ball - 2-1/4" Rise - 7,500 lbs
Easy to use, no assembly required!
# 20
Curt Ball Mount for 2" Hitches - 4" Rise, 6" Drop - 14-1/4" Long - 6,000 lbs
The Extra Long Ball Mount proved useful immediately upon receipt. Delivery was prompt, and the updates from etrailer.com helped plan transport of several bicycles, simultaneously with a camper trailer. The extended length facilitated use with a Swagman bicycle rack, also purchased via etrailer.com. The product arrived in excellent condition, with correct capacity rating, and works perfectly, and in conjunction with the bicycle rack. I recommend purchases from etrailer.
Works great solid product.
What our customers are saying:
"I like the easy of navigation through the site. It only took me a couple of minutes to place my order. Thank You I will shop this sight again in the future."