# 1
Hitch Adapter 1-1/4" to 2" Trailer Hitch Receiver with 5" Rise
I bought this adapter so that I could mount a bike rack on the back of my 2012 Honda Civic. The adapter got the bikes high enough so that they wouldn't hit the pavement when backing out of my driveway and transitioning to the street. The product is definitely strong and well made. It was put to the test with a very heavy steel thule bike rack that was definitely heavier than all 4 of the bikes that were mounted on it. The fit was precise so it didn't hit my rear bumper as well.
Allowed me to add a folding platform for a wheelchair to the bar of my car without changing my hitch. Just what I needed.
# 2
Hitch Adapter 1-1/4" to 2" Trailer Hitch Receiver
It doesn't go all the way into the Volvo xc 60 2020 recharge hitch so the pin can't fit in the hole.
Very heavy duty. Will use it with a bike rack I had for another vehicle that had a 2" receiver.
# 3
Curt Trailer Hitch Receiver Adapter - 1-1/4" (Class II) to 2" - 6" Long
The Curt C45785 1.25 inch to 2 inch hitch adapter seems well-constructed, but does NOT fit the current SPA Volvo OEM 1.25 inch automatic retractable hitch receptacle (mine is on a 2020 V60 Cross country). The lock pin hole doesn't go back far enough to accommodate the pin -- see photo.
Great product from an even greater company. ETRAILER has the knowledge and products to solve most any trailering problem.
# 4
Hitch Reducer 2" to 1-1/4" Trailer Hitch Receiver
This has worked great to reduce my 2" hitch so that I can continue to use my 1 1/4" Thule bike rack, and I like that it doesn't extend out much from the hitch. After my last trip though, the inset separated from the larger piece. I can still use it, but without the smaller piece fixed in place, I can't put it on the car first and then slide the bike rack into it since the smaller piece slides, and it's impossible to line the holes up. It's also rusted more than I expected. It wasn't inexpensive, and I was hoping it would last longer. I've used it for maybe a dozen trips.
Perfect fit BUT the inner tube broke away from the outer tube after about a dozen trips. One small weld on the outside corner is all that holds it on. The small amount of play must have been too much for it. I was even using an anti-rattle lock pin. Very disappointing due to the price point. And now it’s unsafe to use as it could slip right out of the receiver.
# 5
Hitch Adapter 1-1/4" to 2" Trailer Hitch Receiver (Class II Only)
This adapter allows us to use a bike rack we have across all our cars. It is perfect for light duty applications, easy to use and it can be stored in the trunk until you need it. I would definitely recommend it.
Hitch pin hole was too far up the shaft and couldn't lock into the receiver. Had to return.
# 6
Yakima EXO SwingBase Swing Away Hitch Extender - 2" Hitches
This is sobeasy to install! It only took me 20 minutes. This definitely gives me much needed storage space for my 2023 Thor Scope 18M
After you learn how to use it it works great
# 7
Roadmaster Dual Hitch Receiver Adapter, 2 " or 8" Drop/Rise
Perfect for my application.
Works great. We're towing a jeep and have a bike rack behind our motor home.
# 8
Kuat Pivot 2 Swing Away Hitch Extender for Bike Racks - 2" Hitches - Passenger's Side
I recommend etrailer. Customer service helped me get the bike rack and swing away to fit my needs. The Pivot 2 works wonderfully when it’s not broken. First the release latch stopped working within a month-Kuat customer service replaced it. Then there was a 1.5”split in the steel where the bike rack slides in, (it could have been a very tragic outcome had I not removed my bike rack when I did).Kuat customer service would not give me a refund but they did replace it with another one. Here’s hoping third one is the charm. Note: I went directly through Kuat when I had a problem not etrailer. I didn’t give etrailer the opportunity to make it right because I was traveling and felt as though the manufacturer would get me faster results. I’m not sure if that was the best decision.
Excellent product, solidly built and easy to install. I was hesitant because of the full size spare tire on the back ladder. The videos and the specifications (especially the sizing details) gave me all the info I needed to make the decision to install it on my Sprinter. The swing away rack gives me full access to the rear of the vehicle. I wish I had bought it sooner.
# 9
Trailer Hitch Adapter - 1-1/4" to 2" Hitch - 4-1/2" Drop/5" Rise - 6-1/2" L
I was looking for something like this for my 1 1/4 Reciever. My biggest concern was your 2 inch Adapter would hit the Car's rear Rubber Bumper....it cleared by 1/4 inch on my 2016 Ford Focus, so I'm happy. I think I purchased the Trailer Hitch from your company, and use it for a Bicycle Rack. With this Adapter, I can look into other Hitch Accessories.
Would have been nicer if a hitch pin was included.
# 10
CR Brophy Hitch Extender for 1-1/4" Hitch Receivers - 5-3/4" Long
Here in Saskatoon, Canada, I am very pleased to endorse J&J's flagpole holder and hitch mount extension products. Solid construction and beautifully finished engineered pieces. Fitted easily onto my '92 Camaro RS, for Shriner parades. Supporting a worthy philanthropic effort for children.
I personally couldn't use it. But I know metal industry very well and this will work perfectly in its environment. It was just not needed and I never put it on.
# 11
Malone 2" Dual Purpose Hitch Receiver
One year of ownership and several road trips of use - This hitch adapter has been great for letting me carry more gear (specifically my bikes on a rack) along with my trailer. I'm very happy. Well worth the money spent. I will note one thing: be diligent about measuring and calculating how your gear racks will stick out from your vehicle with this. The clearance on my bikes to my trailer was exactly enough on a turn. If my trailer was 2 inches closer and it wouldn't have worked.
Used the Malone 2" Dual Purpose Hitch Receiver to have a bike rack with two bikes on the upper Receiver and a 21' bassboat on the lower Receiver. Ran down to Florida Everglades, Florida Keys and back home. Almost exactly 4,000 miles. Hitch worked perfectly. I did find that you can not "jacknife" the boat as much or the bow of the boat will touch the bikes on the rack but that is to be expected. Hitch was quiet, strong and exceeded my expectations. Easy to install and looking forward to using it again in a month for another 4,000 mile road trip. Note: I drive fast and the roads are not always perfect. This is a sturdy Hitch Receiver. Hope this review helps you. Sorry, crummy photo as the Receiver is a "set it and forget it" product. Be well.
What our customers are saying:
"Your internet site is very well organized and easy to use...My order was shipped very promptly and included everything I ordered...All in all this was a simple procedure for what can be a complicated order. I would use your company again or recommend you to others. Your selection was broad and your prices fair."