# 1
Draw-Tite Ball Mount for 2" Hitches - 3/4" Rise, 2" Drop - 8-1/2" Long - 7.5K
Overall, I am extremely satisfied with the products I bought. Your communications are excellent; shipping was performed in an expedient manner and the tracking of the packages was much appreciated. I'm not sure I'll be buying anything else from you (I can't imagine needing another tow bar again) but will surely recommend your company if asked.
Fits loosely into the hitch, along with a loose fitting pin. Thus, your trailer will constantly rattle and clang every 10th of a mile that you drive. It will drive you crazy and insane thinking that your trailer with your $50,000 boat or camper will disconnect and be left along the highway behind you for all semi-trucks to run over and shred to thousands of bits and pieces.
# 2
etrailer Ball Mount Kit for 2" Hitches - 7,500 lbs
I was very pleased with the etrailer.com staff's help in choice of hitch, ease of purchase shipping and tracking of the products 98900 and E98866, both products arriving at my residence together the day promised and undamaged. My Grandson and I mounted the hitch today. I backed the car up onto a set of ramps and by removing the piece from the rear bumper as shown in the video, we had very little problems in guiding the hitch in above the muffler to its bolt down point and pulling the wires through the proper holes which I had circled with chalk. I did not trust the video and had constructed a wooden support under the muffler so it did not drop should the hitch slip out of our hands. We did use it to rest the hitch on top of the muffler when our arms got tired until we got the first nut on a bolt on either side in place. Being 70 years old with two back surgeries I would never have attempted this by myself because the class III 2" hitch is very heavy and awkward as the receiver area makes it want to tip down but a short 2x2 support kept it balanced. The video provided is worth mentioning, as it made the job easily understandable. Between prepwork and all it took about 1 1/2 hours. Very pleased.
Bought a trailer hitch and wiring harness for my 2017 Ford Escape. Both the hitch and wiring harness went on very easy, I spent maybe 4 hours with a lunch break thrown in to put the whole thing together.. saved me a ton of money not having to rent a truck and car carrier, and just towing a trailer. Thanks for a great product and a great price.
# 3
Draw-Tite Ball Mount for 2" Hitches - 2-3/4" Rise, 4" Drop - 9" Long - 7.5K
Nice items...all carefully packaged and individually separated for shipping...much appreciate the extra effort!!!!!
Looks good
# 4
Curt Towing Starter Kit for 2" Hitches - 2" Ball - 3/4" Rise, 2" Drop - 7.5K
Looks great, if it holds up under use, then this is a great buy. Heavy duty, well spend money. I like the key lock, I have never seen this before but I can see you may have a need for locking your hitch at night in a motel parking lot or somewhere when you have to leave your hitch in your auto unattended.
# 5
Curt Multipurpose Ball Mount with 2" Receiver for Bike Racks and Cargo Carriers - 7,500 lbs
I am using the hitch for a car dolly and a bike rack. The fit is a little loose for the bike rackmI'll see it really works when get on the road.
Quality is excellent. However, it did not work so I am not sure what to do with it. I thought I could use the top hitch for a Bike rack and pull a utility trailer with other toys. The trailer is too close to make a turn so good try but not able to use it. Thank you for asking. I did not open the box for a while because I was having the trailer worked on so assumed I waited too long to return.
# 6
Convert-A-Ball Ball Mount for 2" Hitches - 3/4" Rise, 2" Drop - 10,000 lbs
Makes for a great hard-core dirt road set up with a 3000 pound trailer, in conjunction with the Curt rocker ball, Towing with an F150 over many miles of washboards, down through washes where the road was washed out, etc. Really makes for a gentler set up on the equipment in the trailer and the truck. Thanks a lot E-trailer!
My usage of your hitch is a bit unusual, I think. I pull a two ton roller with my Ram and I've used your cushioned hitch to smooth out the process. The roller Lunette just dropped over a 2" ball and then banged and jerked on the ball neck. Check out the photos for my adaptation.. I can flip it over and use the 2" ball! Have enclosed some photos. The cushion is holding up very well and it takes a beating!! Thanks
# 7
Curt Tri-Ball Mount - 3 Chrome Balls - 10,000 lbs
definitely solid as a rock
Excellent product! With the three different ball sizes, this tri-ball mount gives you a lot of flexibility. Gone are the days of having several different ball mounts to fit different tongues. High quality construction makes this an excellent investment.
# 8
Hidden Hitch Ball Mount - 3/4" Rise, 2" Drop - 15-3/4" Long - 6,000 lbs
Ordered this hitch and it worked perfect for what I needed just bought a teardrop trailer. Couldn't open up the tailgate on my Jeep so I ordered this extended hitch and I brought the ball out past my spare tire and the tailgate opens up now I have no problems. And I looked everywhere couldn't find one of this quality and at this price very reasonable the other ones hundreds of dollars didn't want to spend that much.
This is a huge difference maker for us. I can open the tailgate of our truck with the trailer still attached, and helps minimize any body damage if my backing up is not good.
# 9
MaxxTow Ball Mount w/ 2" Accessory Receiver - 2" Hitches - 2-1/4" Drop - 5,000 lbs
Heavy duty , very good quality.
# 10
Curt Ball Mount for 2" Hitches - 3/4" Rise, 2" Drop - 10-1/4" Long - 7,500 lbs
Longer stinger let me drop the tailgate on my Tacoma with trailer attached. Replaced a similar but shorter Curt hitch and both are very substantial and well made for the weight of my trailer.
With good information from the website it was easy to order a Curt 2" Trailer Hitch, the Upgraded Circuit Protected Tail Light Converter Hardwire Kit w/ 4-Pole Connector and Circuit Tester - 119178KIT, Curt Ball Mount for 2" Hitches (3/4" Rise, 2" Drop - 10-1/4" Long - 7,500 lbs - D-4), Curt Pin and Clip Hitch Receiver - C21500, Rubber Tube Cover for 2" Trailer Hitch Receivers - I-728,Review, and 2" hitch ball 40038. Parts were delivered earlier than the initial estimate. Self installation (on a sloped drive way) took just under 2 hour. The fit of parts was very good, instructions and on-line video's were very helpful. My Kia did not have the wire plug in option, but the splice connections in the wire kit were easy to install. Most of the parts are hidden from view when the ball mount is not used.
# 11
Curt Class III Ball Mount with 1-7/8" Ball - 2" Drop - 3,500 lbs
it ok. i like the [price]
Works great! No issues. Very pleased with etrailer. After I ordered the wrong part, etrailer took care of me. They were great to work with.
# 12
Channel Style Adjustable Ballmount - 2" & 2-5/16" Balls - 14,000 lbs
Still haven't towed anything with it yet but it seems very solid. I do think it will rattle some in the receiver because it is loose in my 2" receiver on my 2019 F150.
# 13
Curt Ball Mount for 2" Hitches - 4" Rise, 6" Drop - 9-1/4" Long - 7,500 lbs
it ok. i like the [price]
Great product! Easy install. Completed project myself in 1.5 hours...would recommend for any skill level...just gotta be willing to crawl around on your back
# 14
Ball Mount 3/4" Rise or 2" Drop - 12-5/8" Long
it ok. i like the [price]
Great product! Easy install. Completed project myself in 1.5 hours...would recommend for any skill level...just gotta be willing to crawl around on your back
# 15
Curt Class III Ball Mount with 2" Ball - 4" Drop - 2" Rise - 7,500 lbs
it ok. i like the [price]
Very well made hitch and already put together. Very fast response on the order, got the order in only a few days.
# 16
etrailer Ball Mount Kit for 2" Hitches - 3/4" Rise or 2" Drop - 7,500 lbs
I was very pleased with the etrailer.com staff's help in choice of hitch, ease of purchase shipping and tracking of the products 98900 and E98866, both products arriving at my residence together the day promised and undamaged. My Grandson and I mounted the hitch today. I backed the car up onto a set of ramps and by removing the piece from the rear bumper as shown in the video, we had very little problems in guiding the hitch in above the muffler to its bolt down point and pulling the wires through the proper holes which I had circled with chalk. I did not trust the video and had constructed a wooden support under the muffler so it did not drop should the hitch slip out of our hands. We did use it to rest the hitch on top of the muffler when our arms got tired until we got the first nut on a bolt on either side in place. Being 70 years old with two back surgeries I would never have attempted this by myself because the class III 2" hitch is very heavy and awkward as the receiver area makes it want to tip down but a short 2x2 support kept it balanced. The video provided is worth mentioning, as it made the job easily understandable. Between prepwork and all it took about 1 1/2 hours. Very pleased.
Just as advertised!
# 17
Rapid Hitch Adjustable Aluminum Ball Mount Kit - 2 Zinc Balls - 4" Drop or Rise
This is a great product, so light and easy to use. Wish I had known about the pre-coated ball version, as i would have purchased that version, just cleaner than having grease on everything. Still this is by far so much easier than the old metal style receivers!!
Have been a customer for long time! Always and I mean always have had a great experience! The latest was super great as I needed a hitch in a big hurry to escape from a high Covid area and Odelia went way out of her way to make the delivery super fast! And to get us out of the area! :) E trailer has great customer service and products always have been quality!! Don't be afraid to do business with etrailer........
# 18
Pro Series Tri-Ball Mount for 2" Hitches - 1-7/8", 2", 2-5/16" Balls - Black
Haven’t had it long enough to see how problems. Working great now
EVERTHING WAS EXCELLENT FROM PLACING THE ORDER TO RECEIVING THE PACKAGE AS WELL AS THE FOLLOW UP. WOULD STRONGLY RECOMMEND ETRAILER....
# 19
Curt Ball Mount for 2" Hitches - 6-1/4" Rise, 7-1/2" Drop - 13" Long - 5,000 lbs
it ok. i like the [price]
Used on 2014 ford escape Titanium Hitch is Draw tite Item # 75758 This ball mount was perfect for leveling my trailer. etrailer is A+ service.
# 20
Brophy Ball Mount for 2" Hitches - 3/4" Rise, 2" Drop - 13-1/4" Long - 10K
Good service from e-trailer as usual. The extra length allowed me to lower the trundra tail gate with the Escape trave trailr hitched up. Should alse allow for a sharper maximum angle when backing the trailer up before equipment contact.
I didn’t receive the ball mount. Only thing in the box was anti rattle device
What our customers are saying:
"very easy to shop"