Best 2018 Dodge Journey Trailer Lights

Chose Optronics because of warranty and help from customer service at etrailer. Staff is awesome, very knowledgeable. Light is very bright, installation very easy, all holes lined up with factory holes on a 2001 Shoreland'r boat trailer

No more bulbs to worry with. It fit perfectly on my trailer. It lights up very clearly. The cost is competitive but the quality surpasses....

Perfect, light matches exactly. Very satisfied with all my purchases: Hitch, aluminum truck rack, boat trailer lights, wiring harnesses…

I have been more than pleased with the quality and performance of the Optronics brand lights! These are no exception! This tail light assembly is a direct replacement on my ShoreLander trailer. The running lights, including four on the side, are a nice feature. The brake/signal light are more intense as expected. Lastly, the dimensions and mounting holes allowed me to bolt them into place without issue! I, like others, am amazed at the brightness of the lights. They are a huge upgrade over my existing incandescent lamps! I am looking forward to no more burnt/broken bulbs! I have purchased Optronics tailslights in the past, and am purchasing again as I like the quality/performance of the taillight assemblies. I would buy again and I would recommend to others as well!

Beautiful tail light. Very bright for the brake and turn signal. Fitted it on the back of my trailer with an L bracket.

Very nice. Replaced an incandescent unit.

Item arrived in very secured packing, shipping was fast, the quality is very good, I will buy again from you, Thank You.

Really cheap. These lights are marketed as submersible, but based on what's in the package I'm really dubious. The lens bodies are not sealed. As you can see My photo, each lens body has a clearance hole for the wire - No gasket, and plenty of room around the wire, So water will definitely flood in and submerge the contacts and bulb/socket If you put these on a boat trailer. Additionally, to Make the wire connections. They give you wire nuts. For submersible wire connections, at the very least, you should use crimp butts wrapped in tape - or better yet a heat shrink crimp butt. But they give you wire nuts, which aren't even really stable against vibration, let alone moisture. It does say 3-year warranty on the package, however, so I guess I'll be testing that out.

I bought my Haulmark 12'x6' Enclosed trailer used a few months back. The trailer was in good shape but the sun faded out the marker lamps. Since I use the trailer as a landscape equipment trailer I'm usually not working at night but now with the daylight savings hour change I find myself getting home when it's dark and now those faded lamps were bugging me. Since I've had great experience in the past with etrailer.com I decided to take the plunge and change out the 14 marker lights to their LED versions...Wow what a difference. Not only are my lamps no longer sun faded but they are bright! Definitely was worth the money and the installation was quick since they simply snap into place. Thanks, RAM

These guys are good,we build a few trailers in our shop, & these guys have the inventory, you get it fast & you can get them on the phone, we need more outfits like this to do business with! Thanks Guy's--

Direct replacement on my Circle J horse trailer fender.

These lights were exactly what I needed, I didn't find them any where else, I have an all Aluminum Trailer and they go on the fenders, as the law requires for trailers over 80" wide. Thanks for a good product at a good price and very reasonable shipping, I always use the USPS when I can.

Wow, what a difference LED clearance lights make, especially at night. It makes my business information really stand out and people who follow me really notice that. I've been wanting to go LED the past couple years and now that I recently made the change, I'm not ever going back to standard low-level light bulbs again. Thanks etrailer for offering these lights and at a very affordable price. You were almost half the price as our local part store was selling them for, plus these are more stylish as well.

I bought my Haulmark 12'x6' Enclosed trailer used a few months back. The trailer was in good shape but the sun faded out the marker lamps. Since I use the trailer as a landscape equipment trailer I'm usually not working at night but now with the daylight savings hour change I find myself getting home when it's dark and now those faded lamps were bugging me. Since I've had great experience in the past with etrailer.com I decided to take the plunge and change out the 14 marker lights to their LED versions...Wow what a difference. Not only are my lamps no longer sun faded but they are bright! Definitely was worth the money and the installation was quick since they simply snap into place. Thanks, RAM

I like these reflectors better than the rectangular reflectors, the pre-installed double back sticky tape works well. I still drill hole and put in screws, just me I guess. They look great and are large enough to be seen well on the side of any trailer or what ever you chose to put them on.

Just what we needed. I ordered a large quantity for fence posts. Price was better for these reflectors than post specific models. Product took fairly long to arrive but George at Etrailer contacted me to let me know there was a delay.

Needed a couple replacement lenses for my Escapade trailer. Was able to get the red but not the amber. These lenses are becoming obsolete, so I will switch to L.E.D. at some point soon.

I added an aftermarket tour pack on my 2006 police bike and theese are Just the look I was going for to match the existing tail light.

When my 7 year old utility trailer lost it's lights, I looked for a solution. The package came quickly and was easy to install. It was a good idea to include the wiring kit along with the Lights because I installed the lights first and discovered that the problem wasn't solved. I then rewired the entire harness and it all works well. I would recommend one change - instead of the wire nuts, add a waterproof heat sealing connection - I soldered my wire connections using a heat shrink wrap. Also - waterproof tap in connections for the side running lights would be helpful.

Always the best of quality and most complete package of trailer light replacements which is why I go to etrailer.com and am a repeat customer. These folks could write the book on how to give outstanding customer service and their people always friendly, professional and knowledgeable. This company is always a pleasure to do business with !!!!

Trailer is now finished! All the part I got from e trailers worked great and look at this beauty

Its a perfect match to to others on my trailer.

shipping delayed but communication with etrailer outstanding giving the truth.

I had discontinued Command 003-5900 lamps on my trailer and these worked great. I ordered the grommet and 90 degree pigtail as well which together made it work. They are nice and bright and work as expected. Purchasing and delivery all were 100%. Exceeded my expectations.

Worked great on our motorhome.

Product worked perfectly for what we were using it for. I purchased a motorcycle and needed to move the license plate bracket to be able to add bags. I found your bracket online, knowing we were going to have to jerry rig it to where we wanted to mount it. I was a little suprised the bracket was plastic when I received it, but still worked great. A friend made 2 mounting brackets from a flat bar, cutting and bending them to the length and angle we needed. Drilled holes and mounted them under the rear fender. Mounted the license plate bracket on the other ends of the custom brackets and wired it in for lights.

The lights came well packaged. All parts were included in a parts bag. I have some doubts as to the quality of the wiring connectors (3M 801). The white grounding wire is too short. I ran two additional lengths of ground wire directly to the lights and eliminated any trailer body induced grounding problems. The stainless bolts were 1/4" and I thought flat washers should have been included along with the stainless lock washers. I went to the local hardware store and purchased 4 each 1/4" flat washers to complete the installation. There was more than enough wire for my small PWC trailer. Installation was straight forward. The lights look very nice and are bright even in the daylight. Worth the purchase price.

DURABLE BRIGHT QUALITY. I've taken my trailer and these lights all around North America (California, Yukon, Texas, Key West, Newfoundland) they have never let me down.

Updated the old bulbs because off LED outage.

We installed these on one of your work trucks because the standard lights are faint during the day and burn out after a short time. These lights are bright and will out live the life of vehicle.

I purchased this Optronics LED Backup Light to supplement the amount of reverse light that the T Bargman LED taillights provide. I installed them on a 1991 Ford E450 21 passenger church bus. This light is intended to be installed in a steel trailer frame with a rubber grommet which I did not order. I did not realize that a grommet was required. I probably would have ordered the grommets just in case I needed them but it was not made obvious to me on the website or recommended that I may want to consider including them in the order. After receiving the package and examining the light I realized that there was no way to secure the light into place without something. I went back to the website and looked up the light again and drilled down to the bottom and there it was, the grommet that I needed. Why didn't the site make the recommendation more obvious or suggest this part before ordering like it did with the wiring lead...? I was able to still make the lights work, it just took a little bit of planning which was required anyway with this custom retrofit application. I cut a precise hole into the fiberglass so that I could recess the light, which was my original plan even before realizing that the light required a grommet. I recessed the light in the hole and glued it in place with silicone. Time will tell if this was a good idea or not. I wish that I would have ordered the elbow wiring leads in stead of the straight ones. I ran into a clearance issue with the straight lead and had to modify them as well.

I have received the product and am very happy to say that the product is going to work for the application we needed it for. However we did have a question on if you could provide part numbers for us. We want to get the pig tail and the grommet for the lights we just purchased for us. Could you provide part numbers so we could get those ordered?

I needed a replacement for a utility trailer. Other aftermarket lights would require drilling & tapping. This unit actually has a ground wire rather than grounding through the unit body.

I recently decided to relocate the license plate on my new 5 X 10 aluminum trailer. It came from the factory with the plate located under the bed of the trailer where lifting the trailer caused damage to the plate and was difficult to see. I purchased the license plate light and began the process of relocation. The light now provides and excellent illumination for the relocated plate, was easy to install, and was very economical to purchase. Attached pictures reflect the finished product installed on my trailer.

Worked great as a replacement for OEM that was no longer available for RV. I also replaced the back side marker lights so the front and back matched. Pat C did a great job in completing my order with substitution for out of stock resistor.

I mounted these behind a plate to replace the cloudy front lights on my truck. Much better look. They were a little lighter weight than I expected but the build quality looks good.

Direct replacement fit perfect

It fit my 1998 Skeeter bass boat trailer and worked perfectly. I'm glad the connector came with some extra long wires.

Purchased LED lights to re-wire a 12-year old trailer. etrailer had all the lights/gaskets needed. Perfect fit to the original OEM lights.

The backing plates and drums came quickly and all items necessary for installation were there except for the nuts that hold the backing plates to the axle flange. I guess they assume this is a replacement part rather than a new installation. The nuts were purchased at my local hardware store for a couple dollars, some grease for the bearings and the parts were on in a couple hours. The price was reasonable here too and free shipping. I will order from etrailer next time.