Best 2017 Honda Odyssey RV Vents And Fans

Only thing is I missed is that it did not come with hardware. But got installed very nice product.

So far it's holding up with no leaks. Kind of on the flimsy side comparing to the one removed but easy to install. Couldn't use the trim ring inside but after a year still looks new and the lifting/lowering mechanism works smoothly. Overall a good price for the quality.

Product worked but wasn't worth the price paid. Ordered the white version which was cheaper and combined with other items for free shipping. Ordered 11/23; Kept changing the delivery till July 2024. You offered the black vents. Charged the higher price and also charged me freight. Turned me off as a customer by bait and switch. Forced me to find a better source for components.

Excellent product and easy to work with. Great service. I was concerned however about insects entering through the vents so came up with a filtration system. Used a PVC coupling and some filter material. Cut the coupling to 1/2 inch rings and remove just enough material to allow an inside press fit. Cut round filter and insert first then hold in place with the ring. On the outside vent cut a long narrow piece as shown. When installed as shown, adds very good double filter and allows air to move freely. Just finished a 6000 mile trip clear across the country and back and filter performed perfectly. Eliminating the heat build up AND keeping the bugs out. JIM : ]

Click to Enlarge

Click to Enlarge

Click to Enlarge

Click to Enlarge

Product fit perfectly. I installed it in about 30 minutes.

Bought these a couple times. They are good.

Shipping was above average, very quick. Product was what I expected, HOWEVER The last one I purchased from another co. Included all the required screws. I was miffed when I opened the box and saw no screws, and the directions which I do not need were for a different application. Overall pleased.

Was missing the retaining clips on both items. The old ones were ok.

Pretty easy install. It works great to let in fresh air without the rain and snow.

They are great I use on my snowmobile trailer.canleave the vent open all the time.

I just got the trailer roof vent, and it is a great product. I unboxed it and noticed it was made of quality material. The top half had nice wide corners with several predrilled holes for easy installation. The inside plastic parts were sturdy and well designed to fit just right. I will be replacing an old plastic roof vent on my 6x12 enclosed trailer. This roof vent will be a life saver because of its quality, and it will be able to handle the years of being in the elements to come. Plastic just doesn't last at all in elements. I would recommend this product to anyone who wants to save themselves a lot of time and money replacing the plastic model roof vents by purchasing one of these. Great Job folks!

No more breaking the roof vent on the trailer when shoveling off snow! Customer service was also excellent and shipped fast!

They look great. Well built, and etrailer is an excellent company. They shipped fast, packaging was good, and communication with the company by phone and email could not have been better.

Thank you for your prompt followup on my damaged merchandise. The replacement was great. Thanks for your good service, that says a lot about your company and will go a long way.

Overall seems like will work for me, but the box had been opened before (black fingerprints all over the unit). This is more a Ventline issue than etrailer issue as it came packaged in the original box. Also, they more clearly mark that there are no screws or other mounting equipment unless you buy the add on package.

Awesome very fast delivery, thank you will definitely shop again.

This fan has worked great for my motor home. If you need a stronger breeze, this may not be the fan for you.

Quick delivery and easy installation. My camper is a little older but this vent fan is an exact match. Bery happy with the removable screen for cleaning great feature the old vent didn’t have.

Hello all. I have a 1973 Apache Pop up, the original vent was missing so I looked online for a replacement and I came across this ventline vanaire roof vent, the vent fit perfectly in the original location of the old vent . This pop up has hard sides when you bring the roof down the side walls meet in the center but leave a gap between each other the handle for the vent fits perfectly in the gap. This memorial weekend we vacationed at Lake Isabella and it gets windy when the vent was closed it stayed closed no matter how strong the wind was. It was a success and worked perfectly. Thanks and I am a happy camper.

Click to Enlarge

Click to Enlarge

Click to Enlarge

Click to Enlarge

Click to Enlarge

Click to Enlarge

Click to Enlarge

Click to Enlarge

Click to Enlarge

I bought this 6" fan a year ago and it is still going strong. I mounted it vertically on the rear wall of my van conversion boxvan(RV Off-Grid Campervan) about 7" from the ceiling. It was a good fit because I didn't want to cut a hole in my roof and my ceiling. It pulls all of the hot air out of the room within less than a minute. If you want to mount yours vertically as well it will operate just fine with no flaws. Water has never leaked through the unit at all even while mounted on the wall instead of the roof. I recently recommended this fan to someone who needed a fresh air fan for summer as well in a van. Perfectly satisfied with this fan, recommend it and would buy again if the need arises! Thank You

Click to Enlarge

This was an exact replacement for my broken roof vent. I watched the videos available on the website and felt pretty good about swapping it myself. It arrives today. I took out the old one and put in the new one in about 30 minutes total. The roof vent install kit made it easy to ensure it was water tight.

Click to Enlarge

Click to Enlarge

Didn't take long to install. Very well made.

I love Etrailer, they have everyday parts as well as hard to find ones. I've ordered parts a couple of times , delivery is always spot on and George is very helpful. The butterfly vent I ordered fit exactly. Same holes no drilling.

Click to Enlarge

These butterfly vents were replacements on a 1994 horse trailer that we are refurbishing. The old ones were solid rust and couldn't be saved. Though today's vents aren't made as large as the old ones, we can make them work and are good quality for this job without a huge investment. We're waiting to install until after we repaint the outside of the trailer so no photos at this time. Fast shipping was also a plus. Thanks etrailer!!

Fair nice product

The attachment for the hinge that pushes the skylight open and closed is a cheap bit of plastic, so this winter the skylight took some wind and eventually sent that piece and the skylight flying. Fortunately, the base is screwed in so that was still available for reattaching and the skylight itself was not broken. Anyway, it’s jury rigged and still functional. Better than the original I guess.

Exactly what we needed as it keeps the windup vent from breaking off if it is left open while driving, as mine was

Click to Enlarge

Click to Enlarge

Easy to install. Product is made durable material that will last. Also works well in that I can leave my roof vent open without getting debris or rain inside with this cover design.

I waited several months before writing a review so that I could make sure this replacement cover didn't leak. It hasn't! It was really easy to install which I did myself. For reference, I'm a 53 year old woman. Our trailer is an enclosed aluminum trailer, and this cover fit perfectly.

Click to Enlarge

Click to Enlarge

The cover came very quickly and securely in the mail, very durable, well constructed and stream-lined. Installed fairly easily with your on line installation Tudors. Unfortunately my base has a different type hinge, so a few minor challenges, but for the most part doable. I still need to find a friction clip to secure my top to the actuator mechanism, but hopefully I can find it locally. Our Arizona sun destroys most plastics as our original cover had failed in about five years. I am very pleased with my new cover top, looking to it meeting and exceeding our needs!

Click to Enlarge

Click to Enlarge

Click to Enlarge

Click to Enlarge

Easily and effortlessly installed. They are made of nylon or flexible plastic I believe. White, powder coated aluminum would have been better but after a few hours of searching these were the nicest looking and the best price.

Click to Enlarge

Click to Enlarge

Hi Carol, I bought a lot of things from etrailer, I'm looking for two rear doors for my trailer, do you sell doors for a 24x60 triailer, or where can I find them? thanks

Click to Enlarge

Delivery was timely, the color is perfect, and they fit without having to change the bracket.

Click to Enlarge

I bought 4 of these to replace registers that cannot be closed off. These open and close but they do not rotate. I am highly disappointed.

I'm really disappointed with the flimsy material and poor finish quality. At first I thought mine might have been defective, but if you zoom in on the product photos that are provided, you'll see that there's lots of flash and rough edges. Mine is a bit worse than the one in the list, but still I'm not going to permanently affix this to my $100,000 motorhome

Click to Enlarge

My new trailer came with a stove vent that exhausted to the inside of the trailer making it unbearable to cook inside in the hot sun of Florida. I modified the fume hood so it could vent through the wall the way it should have been in the 1st place. This plastic vent cover worked as good as any could be expected to do so and provided a neat appearance to finish off the modification. Reasonably priced to boot.

Click to Enlarge

James was great to work with over the phone. He knew his stuff and very nice to work with. He assisted me in making sure that the roof vent cover was the correct fit (and it was). It was an easy install and will keep the rain out during our wet Northwest winter.

Perfect fit for 2015 Airstream Ventline bath fan. My fan only said “Modre VP”. This part was perfect and installed in 5 minutes.

It is exactly what I needed to replace an older vent cover that has deteriorated through time

Good product helpful people