Most Popular Double Eye Springs for 2015 Ford F-150

This product did exactly what we needed it to. Bought a replacement axle from Dexter but it created clearance issues in the wheel wells. After installing this kit we have much more clearance and the trailer rides like a dream.

Outstanding product. I am so grateful the install video was added to the page. I am a hands on individual and struggle reading directions with numerous steps at times and it made it so much easier to install this. The explanation of how the mount has to sit flush with the axle seat once you tighten down the spacers was very helpful during the alignment stage. I still have to weld the brackets to the axle for extra support as recommended but I did notice that I will be gaining roughly 4” of clearance height to my trailer. This will allow me to sit more evenly with my lifted truck and get my trailer in my driveway easier since I have a water drainage built in to the entrance way with a big dip.

Some of the pieces in this kit are of questionable quality. In particular, the threaded center of the nuts are not round, and will not thread on to the bolt. The kit comes with 14 of these nuts, and 7 of them are unusable. This is unforgivable, considering the issue has been reported at least since 2023, as there is a review and accompanying photo on 05/16/2023. So if you buy this kit assuming the problem has been corrected, you will be mistaken. Other than this issue, the kit seems to be acceptable.

great construction, but the screw to connect to the trailer was not long enough.

Upgrade for my trailer with worn bushings and no lube points. The rubber on these equalizers along with the wet bolts and bushings eliminate the squeaks and creaks on my trailer.

Dexter kit looks and feels robust! Can’t wait to put it on and see the results. Did have one of the shackles that would not fit and Etrailer customer service was Awesome! Sent what I needed right away. Will be buying from Etrailer again!

Product and service are excellent. You should consider using better shipping containers or using a different shipper. My box showed up with a hole in the bottom and the tape ripped almost gave way. By reading other comments this is not the first time.

Got these parts quickly and was able to rebuild my trailers entire suspension before hauling a car on a 1000 mile weekend road trip. Very glad I found E-trailer.

Excellent, had everything I needed and more for my trailer. Everything fit well!

I bought a axle, springs wheels, hubs etc. to build a utility trailer, I inadvertently had ordered incompatible hubs for the selected axle the person filling the order noticed this and contacted customer service to alert them of the issue who then called me to correct the problem. This saved me the time and expense of returning the part and delaying the project. great service, attentive, knowledgeable employees and great products. Thanks E trailer.

Great fit. I called to ask what I needed and etrailer made the right suggestions. Fast and friendly service for you trailer needs.

Rec'd item quickly along with new wheels I purchased. Items were packed very well. I installed my new wheels, tires, and equalizer kit the following weekend and my trailer was ready to go.

The Dexter Heavy-Duty Suspension Kit was an Exact Replacement, and a Perfect Fit for my RV Trailer. They were a much more substantial replacement for my factory parts. The bronze bushings, and wet bolts will definitely help my suspension last a long time due to being able to lubricate all of the bushings and pivot points, which will ensure worry free traveling.

I would have given a 5 if the zurk fittings were better quality, one grease (zerk) fitting was damaged and missing the ball, so I had to get one from the hardware store. Put better grease fittings in and there wouldn't be any complaints about not taking grease.

Looking forward to season opener trip! Not that many miles on TT, and am shocked at condition of original plastic bearings. Image shows worst 3 of the 8 removed. The other 6 I didn't drive out of the triangular pieces. Admittedly, I'm retired and not in a hurry but took a total of 7 hours to install both sides including break for lunch and total clean-up of tools. Not a difficult install if you have basic mechanical skills.

After installing the Dexter easy flex and traveling around 7K mile. We are well pleased with the performance. I would recommend the product.

I have received significant support from e-trailer over the past 10 days as I have made several purchases for a new axle, springs, and hangars for my utility trailer. William and others have went out of their way to assist. I have been very satisfied with all products received. I will post another review when the trailer is completed.

Good kit with the necessary parts to replace leaf spring suspension. I welded the hangers rather than bolting them. The parts are not coated for the price point so you will need to paint them or they will rust immediately.

Excellent service and prices. Needed to replace curved equalizer, shackles and bolts, nylon spring bushings, u-bolts, and wheel bearing seals on my sailboat trailer. etrailer had everything and shipped it fast. Staff at etrailer was excellent!

These were just what we needed for repairs on our 1983 stock trailer. The old parts were quite worn. We gave the trailer a face lift as well, and it should last another 37 years.

These were a direct replacement for my 25 year old dump trailer. I removed the plastic bushings and used brass.

The bolt holes are not bored center of the lobes and are not 90 degrees to the stock. The egg shaped equalizers I am replacing have more material remaining on the thin side than the new ones I just received from etrailer. NOT HAPPY Must Resolve This Issue ASAP

Just what I needed. Fast delivery and easy to install. Adam did a great job finding this part for a older trailer.

I have a 2001 travel trailer and I had a spring break on the front axle, thank God I was only a quarter mile from home. I went on the E trailer site easily found the springs I needed, the Triangular equalizer, and the bolts I needed. My order arrived 3 days later, I was very pleased with the quality of all my parts. Some reviews complain about the parts made in china, well lets be honest what is made in the USA any more. Every thing fit as expected and my project is done. Would definitely recommend E trailer to anyone who wants a good product at a fair price . Thanx E trailer!!

Use these to rebuild the used trailer I have and with the new wheels she tracks and goes like new thanks for all the help, first trip 1000 mi round trip to pick up my new ride road fantastic thanks again

Compared to the original suspension parts that came off my trailer, these Dexter heavier duty suspension equalizer and shackle with treatable bronze bushing kit seems to be a major improvement. The shackles have double the thickness than original.

Kit worked as intended. Raised my fifth wheel high enough to get proper clearance over bed on new truck 3" Axle tube 2.5" Spring stack gave me 5.5" of additional height. I also added bump stops on top side just in case a spring breaks.

Jaime at ETrailer was extremely helpful and got my order sent up ups ground since I was having issues using a P.O. Box. My parts arrived quickly and fit perfectly. I installed them last week and my trailer looks so much better and won’t be scraping on my driveway anymore!

The jack is decent. My only complaint would be that the wheel I purchased to go on to the jack does not pivot or turn when I push the trailer around. I have to constantly kick the wheel in order to guide the trailer into position.

very good products and real good price

Worked great for a 3500# dual axle Stealth Apache snowmobile trailer. Informative dimensions in product description. Removed the included plastic bushings and installed MR46ZR MORryde upgrade kit.

Product seems to be of good quality. It's been one year with no problems.