Most Popular Work And Recreation for 2014 Ford F-150

I did install the Thule TracRac SR. I did it on my own and it went well. I'm really pleased with it. As for the photo, I will send you one, once I've washed my truck. Can't make a photo with a dirty truck. I will leave feedback later after some time with the rack.

Excellent rack. I've using these racks for about 15 years.

Best rack on the market, and I’ve owned many! This is my second set of TracRac ladder rack systems. The first in 2006, and it was still going strong until I sold the truck with the rack on it, and now this one I purchased in 2022. Unfortunately, this will be my last one as it will take me into retirement, but it will live on with the new owner that buys this truck! Thank you for manufacturing such a good quality product. A+++++

Very clean appearance. Almost too much assembly work. I really like the wind noise reduction shape in the crossbars. I shortened the crossbars because the stuck out to far, a useless area. Surprised that no tiedowns or ratchet strap hook devices came with it. Therefore I drilled and tapped holes on the base plates for cleats. I also drilled the uprights adding pop rivet nuts where more cleats were added. I ran into a problem with the front base plates having to cut an opening in the final for a second clamp to be installed. I love its appearance. A good buy.

Fantastic experience from ordering to receiving my new Thule Trac Rac system. My package was delivered quickly and without any damage. The installation instructions were clear and simple to follow. I’m very happy with my new rack system

Outstanding product. Fit was perfect. Easy to install and great customer service and support.

Fit perfectly. Was a little concerned that it wouldn't work with my bed cover. But it does and couldn't be happier.

It was a tight fit with my existing GatorTrax Tonneau Cover but doable. The Bull Ring Pocket Router made cutting of the stake pockets a breeze.

The rack is great. Simple to install, extremely sturdy & very well designed. I drove it to Cars & Coffee yesterday & someone asked me what I needed to haul or if I merely installed them "because they look cool." The young lady, Janeth, that helped me was really great! Smart, polite, patient, & above all... knowledgeable about product. I would suggest selling the rack specific for Retrax bed cover. The amount of hardware left over when you add the adapter kit to the standard rack seems really excessive. Rather than be $169 add, it should be a deduct of at least that much.

I had a Thule rack for almost 10 years, but new truck came with a tonneau and the Thule I had was not compatible. This is very solid with the tonneau adapters.Its not as easy to adjust as the Thule but only adjusting a couple times a year, it's ok.

Box was broken on delivery I notified them and they told Me if anything was missing that they would take care of it. Come to find out everything was still there. Everything went together perfectly. Thank you for the communication. Look forward to working again with you all in the future

Rack has worked great hauling 20 foot lumber, 17 foot kayaks and standup paddle boards. The only issue I have had is the front cantilever bar over the cab is about 1" from the roof. If I hit a bump in the road it hits the top of the cab. I have a 2004 Dodge Ram 2500 Crew Cab short bed. Wish there was a little more clearance between the cross bar and cab.

Product worked amazing

Awesome product. Very sturdy. Will work with Backflip G2 cover installed

I installed the rack this morning with no issues. Simple process that took about an hour only because I am picky about everything being square, even and perfectly placed. I was surprised that the unit was as heavy duty as it is. I was expecting something much lighter in gauge of steel. It sits very sturdily on the truck with zero movement. Even my wife thinks it looks rather stylish (neither of us wanted the work rack look). Thanks for the great service and follow up after the sale to let me know it had shipped, you received notification of delivery, and how I liked the product and install. I've learned through experiences that this is the kind of service one can expect from etrailer.com.

I bought the Adarac Aluminum Crossbar Series Ladder Rack a year ago to use for hauling kayaks and it has worked well. It is sturdy, was easy to install, and looks decent on my truck. The paint has held up well. I was able to haul my kayaks from Pennsylvania to Florida and back with no problem. People have stopped me in parking lots asking about the ladder rack. I got a quality product at a reasonable price. The only negative thing I'll say is the ladder rack whistles sometimes. This happens when you get a strong crosswind but the noise is tolerable.

great service. The item was sent out right away.

The quality of the Thule T-Rac Pro 2 is very good and will last forever (never go back to steel). I have a short-bed GMC 2500HD and the storage space overhead for ladders, aluminum planks, 12 - 16 foot boards, etc. is a game-changer. However, I ordered extra load stops and M8 knobs direct from Thule and they did not include the screws to mount the stops (don't even list them in their catalog). I deduct 2 stars for Thule support being a pain

Great product. I use it to haul kayaks and lumber. It's surprisingly strong and sturdy. I put 300 lbs of lumber on it and never heard so much as a squeak. Installation was straightforward. I'll definitely buy another one for my next truck.

So far, so good. It arrived on time. The only things broken were two of the plastic "insert" pieces that go between the rails, but thankfully I only have a 5 1/2' bed, so I didn't really need them. I had it installed by the mechanics I was taking my truck to for other work and they said it installed pretty easily and one of the mechanics is going to get one for his own personal truck. We practiced setting it up and taking it down before I left. I can definitely do this on my own. I absolutely LOVE this product. I didn't want something that "whistled in the wind" or created drag every day even when I wasn't hauling the kayaks, so this is perfect. Thank you!

Very pleased. Exactly what we expected. Only issue is the driver side back plate that is glued on came off and is gone.

I love that I don’t have to find a place in my garage to store this rack, and remove and replace it with each use. It’s fairly easy to load and tie down my canoe single-handed. The loaded rack is quiet and feels secure at highway speeds and on rough roads. Set up and take-down is quick and easy, and the bed-rail look is unobtrusive. The product has met my expectations in every way. Thanks.

Very sturdy. Great look. Worth the $ in my opinion.

Worked perfect for my 2024 Tundra with a Retrax pro XR tonneau cover. Installation was easy.

Very heavy duty ladder rack that does not "whistle" while you drive down the road. Easy install overall, and it is very easy to install and remove the racks as needed after the original install. At the time of purchase this was not available for my vehicle with a short 5.5' bed, but with very minor fabrication the rails for longer beds fit perfectly. I have recommended this rack to several people since purchased a year ago.

Great product! Packaging could be better for the larger pieces (rub marks). My 2018 Ram 1500 quad cab came with some small challenges that I had to solve myself. No videos or written words available. Basically if your bed rails are covered with a bed liner you need to remove the plastic sleeve in the rear stake pockets. Otherwise you won’t get an equal spacing from one rail to the other. You will also need to use the provided rubber tape with the wedges in order to make the rails level. Otherwise it went together great.

Works seamlessly with the retrax rollup cover and not too hard to install. Adjusting the height takes a little bit of work but that is only done on a very limited basis. Allows me to carry my kayaks, a cargo box if I need extra space or paddles & fishing rods so they don't get damaged by closing the tailgate on them.

The rack is great. I have added kayak and paddle holders to it. Rotopax cans and just recently added Roam case mounts to it. All bolted up with no problems and the racks adjustability made it even easier. No complaints 1 year in. Finish has no defects. Had held up to light off road use.

Easy to install and remove. User friendly and adjustable. I'm very happy with it.

I bought this ladder rack because I needed something that would attach to the stake pockets of my f-150 because I have a bed cover. Everything else I found had to hook around the side of the truck bed. Installation was easy. The only issue I had was the forward stake holes didn't have a removable cover. I had to cut a hole in each side.I use them to carry my kayaks when I go camping. They work great for that and carrying anything that won't fit in the bed.

Very happy this product so far. The adapter kit worked great to mount them on my retrax bed cover. I have been hauling up to 2 kayaks and a rod rack on them and they work great. Very solid and they are the best looking racks I have seen on the road.

With this rack, you get what you pay for. It’s expensive and it’s worth it. Well built, quality paint, and once it on your truck, it’s as solid as a brick [house]. Best looking rack out there in my opinion.

I have had the rack installed for about six weeks. After a few trips on everything from highways to gravel and dirt roads it has been very solid. We have a fly fishing rod case mounted on it and it's solid. I think there is a little wind noise but not much. Easy to install, lots of good paper instructions as well as videos on line. Next trip will have our canoe mounted on top.

I love my Adarac Pro Series Custom Truck Bed Ladder Rack - Aluminum - Matte Black - 500 lbs. I found it easy to install by myself—including cutting the deck plastic trim to expose my stake covers. Its black finish complements my truck. Best of all, it enables my BAK Industries tonneau cover, Revolver X2, to maintain is full functionality. My only recommendation would be to include more foam strips. They are intended to fill the gaps between the end of the grooves on the plastic trim to the end of the rail. There was enough for one strip of foam on each end rather than two (one on each side of the rail) on each end of the rails.